CS Paper Radar

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila

cs.RO ·submitted 2026-09-28 17:46 UTC · v2
code/data

Abstract

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

Comment
GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Closest papers

Nearest neighbours by meaning across the whole index.

Composable Dynamics for Cooperative Humanoids: A RoboCompiler Extension

cs.RO ·2026-10-09 ·Mehdi Heydari Shahna, Jouni Mattila
similarity 0.66
Abstract

Physically connected humanoids need consistent dynamics for internal actuator loops, inter-robot forces, and changing ground supports. We extend RoboCompiler with member-wise dynamics assembly, compiling reduced dynamics from rigid bodies, moving actuator parts, and reflected rotor inertias. Compiled body Jacobians and analytic constraint curvature yield an explicit Coriolis factor satisfying the power identity for floating-base quasi-velocities. A two-level reduction retains reusable robot models while composing their supports and hand connections; local inertial updates have rank at most six, and prescribed-acceleration constraint wrenches are affine in actuator efforts. These interfaces support actuator-aware tracking, coupled force allocation, payload updates, and support-mode switching for five hand-linked humanoids. Across 264 feasible states in eight humanoid configurations, normalised acceleration discrepancies remain within $1.6\!\times\!10^{-10}$ against a hard-constraint reference and $1.4\!\times\!10^{-10}$ against a compiler-independent reference; MuJoCo simulations achieve 0.73~mm root-mean-square (RMS) pelvis error in the ring dance and complete side steps through 20 support-mode changes.

0.29

Adapting Rigid-Body Dynamics Derivatives for Constraint Embedding Closed-Chain Models

cs.RO ·2026-09-17 ·Daniel J. Volpi, Patrick M. Wensing
top venue similarity 0.65
Abstract · 8 pages, 6 figures

This paper extends an existing algorithm for the first-order derivatives of rigid-body dynamics to the case of closed-chain kinematic systems modeled using constraint embed- ding. Many standard dynamics algorithms apply to both open- chain and constraint-embedded models, but existing efficient derivative methods assume joint velocity effects are locally config- uration invariant. We remove this assumption and derive adapted algorithms that extend dynamics derivatives to more general joint types, including those arising in constraint-embedded closed- chain models. Our results compare conventional pin-joint robot models with more complete actuation models that capture local closed chains. We show that the additional terms introduced by these generalizations have low computational impact when mod- eling actuation kinematics alone, but can incur higher cost when additional rigid bodies, such as motor rotors, are included in the actuation chain, or when considering non-local loops. Overall, these results enable more accurate dynamics computations for constraint-embedded actuation submechanisms to be adopted in model-predictive control and differentiable simulation.

0.59

VABAR: A Variational Automation Benchmark for Agentic Robotics

cs.RO ·2026-11-04 ·Shuangyu Xie, Kaiyuan Chen, Uksang Yoo, Xinyue Zhu, Meadow Shen +14 more
benchmarkcode/data similarity 0.65
Abstract

For robots to operate reliably in commercial and industrial applications, they must persistently perform specific tasks with known variations in object shape and pose. We call this Variational Automation (VA) to differentiate these settings from fixed automation. Inspired by recent papers on Agentic Robotics, where pretrained LLM and VLM coding agents combine interpretable robot programming with the open-world adaptability of model free policies, we propose a general set of agentic robotics benchmark design criteria that includes accessibility, repeatability, diversity, relevance to agentic robotics and practical applications, physical realizability, resistance to benchmark saturation, and computational efficiency. We instantiate these principles in six manipulation task classes spanning industrial, medical, and infrastructure applications: tool sorting, tool hanging, gear meshing, syringe packing, cable insertion, and cable routing. We introduce the Variational Automation Benchmark for Agentic Robotics (VABAR), an open, easily replicable, simulation-based manipulation benchmark to systematically evaluating agentic robotics systems. Built fully on open-source tools, VABAR features detailed implementations using the Newton physics engine, standardized task variations, difficulty tiers, success metrics, and a library of 33 generalizable skills with human-authored programmatic reference solutions. We provide initial baseline evaluations using an open agentic manipulation harness, Graph-as-Policy (GaP), and Isaac Lab Arena.

0.47

CSymPlan: Certified Symbolic Planning and Control for High-DOF Manipulators

cs.RO eess.SY ·2026-08-24 ·Aditya Narendra, Ashok Kumar Saini, Mahathi Anand, Mahmoud Khaled, Fares J. Abu-Dakka +1 more
hot direction similarity 0.64
Abstract

Robot manipulators are commonly engineered around a decoupled motion-generation stack: a planner computes a collision-free path and a lower-level controller tracks the resulting reference. This separation is computationally convenient, but it can produce references that are difficult to execute under actuator limits, tracking error, model mismatch, and small obstacle clearances. We present CSymPlan, a certified symbolic planning and control framework for high-DOF manipulators with two complementary implementations: an offline implementation that precomputes certified reach-avoid feedback policies for known workspaces; and an online implementation that synthesizes or updates symbolic policies at runtime from changing task and perception information using parallelization. The offline implementation reduces the manipulator dynamics to a sampled perturbed double-integrator model in operational space through feedback linearization, treats torque-realization errors, modeling inaccuracies, and measurement uncertainty as bounded disturbances, and refines the synthesized symbolic policy to the Franka FR3 through a quantization--lookup--torque realization pipeline. The online implementation uses the same abstraction and refinement interface, but replaces the precomputed policy table with a runtime pFaces request--synthesis--execution loop. In randomized simulated benchmarks and perception-driven Franka FR3 experiments, both implementations complete reach-avoid tasks with zero safety violations; whenever no certified action exists, the robot holds, replans, or stops safely instead of executing an uncertified command.

0.49

Modular Kinematic Reduction of Closed-Chain Mechanisms Using Path Assembly and Defect Homotopy

cs.RO ·2026-09-10 ·Mohammad Dastranj, Jouni Mattila
similarity 0.64
Abstract

Closed kinematic chains complicate modular modeling by coupling active and passive coordinates through nonlinear closure constraints. This paper presents a Path-Assembled Closure Differential Mapping (PACDM) framework for modular closure resolution and kinematic reduction. Each closure element compares two ordered transformation paths with common endpoints, with their mismatch expressed through the logarithm on SE(3) and the corresponding Jacobian assembled from local transformation derivatives. Multi-path modules are constructed from a minimal set of pairwise closure elements, while rank-revealing analysis selects locally independent scalar constraints. A defect homotopy recovers closure-consistent passive coordinates from approximate estimates along a feasible and regular continuation path. At regular configurations, implicit differentiation yields the local active-to-passive differential mapping, which is subsequently used in a predictor-corrector continuation procedure for prescribed motion. The framework is evaluated on a seven-degree-of-freedom heavy-duty manipulator containing two-path and three-path closed-chain modules. Comparison with Simscape Multibody yields trajectory root-mean-square errors below 8.5 x 10^-10 rad, while predictor-corrector continuation is approximately 45.8 times faster than applying defect homotopy at every trajectory sample.

0.52

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.63
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

Analytic Robot Self-Model: Learning Screw-Axis Kinematics for Rendering and Model-Based Control

cs.RO ·2026-10-11 ·Xu Chen, Ning Tan
similarity 0.62
Abstract · 26 pages, 6 figures, supplementary information included

Visual self-modelling lets robots learn body models from observations, but such models usually encode kinematics implicitly rather than exposing metric joint parameters for computation and control. Moreover, a good fit to images does not by itself establish accurate kinematics. Here we present an explicit analytic robot self-model that requires neither deformation networks nor URDF/CAD templates. Multi-view images and joint readings establish Gaussian appearance and provide motion evidence for rigid link assignments, whereas sparse end-effector poses independently identify metric screw axes. The resulting closed-form forward kinematics and analytic Jacobian can be evaluated beyond the fitting ranges. We validate the model on a simulated seven-axis arm, a simulated twelve-joint quadruped and a real six-axis arm. In simulation, it achieves millimetre-level reaching and pick-and-place, as well as closed-loop quadruped walking. On the real arm, it renders held-out configurations, predicts end-effector positions with a median error of 6.4 mm, compared with 11.7 mm for a calibrated nominal model, and supports reaching with external marker feedback. A controlled comparison shows that image fit alone is not enough: two Panda models differing only in their joint axes are 0.55 dB apart in PSNR, yet their end-effector prediction errors differ 13.7-fold.

0.30

Planning along Differentiable Charts of Constraint Manifolds with General-Purpose IK Solvers

cs.RO ·2026-09-09 ·Thomas Cohn, Seiji Shaw, Harel Biggie, Travis Manderson, Nicholas Roy +1 more
theory similarity 0.62
Abstract · 8 pages, 4 figures, 3 tables. Under review. Project website: https://cohnt.github.io/inverse-function-theorem-parameterization/

Planning trajectories for robot manipulators under kinematic equality constraints restricts feasible motions to a measure-zero submanifold of the configuration space, requiring special algorithmic treatment. A promising strategy is parametrizing the set of feasible configurations using analytic inverse kinematics (IK). Bespoke analytic IK functions can be written to be differentiable, a necessary property for gradient-based trajectory optimization. But the vast majority of IK functions are computed by automated meta-solvers like IKFast, and are difficult to modify for differentiability. We present a new approach for computing gradients of analytic IK parameterizations: we leverage the inverse function theorem to recover the desired gradients from the ordinary forward kinematic Jacobian. Furthermore, we present a least-squares domain extension and an optimization-amenable description of the reachability constraint, which preserves gradient signal outside the reachable workspace. We demonstrate the efficacy of our approach through numerical experiments and downstream tasks, including a hardware demonstration of an RB-Y1 picking up a box and placing it on a table. Project website: https://cohnt.github.io/inverse-function-theorem-parameterization/

0.53