CS Paper Radar

CSymPlan: Certified Symbolic Planning and Control for High-DOF Manipulators

Aditya Narendra, Ashok Kumar Saini, Mahathi Anand, Mahmoud Khaled, Fares J. Abu-Dakka, Abdalla Swikir

cs.RO eess.SY ·submitted 2026-08-24 08:45 UTC · v1
hot direction

Abstract

Robot manipulators are commonly engineered around a decoupled motion-generation stack: a planner computes a collision-free path and a lower-level controller tracks the resulting reference. This separation is computationally convenient, but it can produce references that are difficult to execute under actuator limits, tracking error, model mismatch, and small obstacle clearances. We present CSymPlan, a certified symbolic planning and control framework for high-DOF manipulators with two complementary implementations: an offline implementation that precomputes certified reach-avoid feedback policies for known workspaces; and an online implementation that synthesizes or updates symbolic policies at runtime from changing task and perception information using parallelization. The offline implementation reduces the manipulator dynamics to a sampled perturbed double-integrator model in operational space through feedback linearization, treats torque-realization errors, modeling inaccuracies, and measurement uncertainty as bounded disturbances, and refines the synthesized symbolic policy to the Franka FR3 through a quantization--lookup--torque realization pipeline. The online implementation uses the same abstraction and refinement interface, but replaces the precomputed policy table with a runtime pFaces request--synthesis--execution loop. In randomized simulated benchmarks and perception-driven Franka FR3 experiments, both implementations complete reach-avoid tasks with zero safety violations; whenever no certified action exists, the robot holds, replans, or stops safely instead of executing an uncertified command.

Closest papers

Nearest neighbours by meaning across the whole index.

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/data similarity 0.64
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53

Keeping the Franka Emika Panda alive: a ROS 2 stack with a reliable position interface

cs.RO ·2026-08-20 ·Antonio Langella, Davide Risi, Vincenzo Petrone, Enrico Ferrentino, Pasquale Chiacchio
publishedcode/datahot direction similarity 0.61
Abstract · 12 pages, 10 figures

This paper presents an open-source software stack that restores ROS 2 support for the Franka Emika Panda robot while resolving the long-standing unreliability of its external position control interface. We first analyze the root causes of unstable position control and show that the observed vibrations and protective stops arise from the timing of the external control loop and sampling jitter, rather than from limitations of the robot itself. Building on this analysis, we introduce an asynchronous hardware interface that decouples real-time communication from the ROS 2 control loop, a rate-matching mechanism for slower command sources, and a position-domain reference generation strategy that produces reliable, smooth position commands. Experimental validation shows that the proposed architecture reliably tracks velocity references by reducing motion artifacts introduced by the official implementation, and the stack is validated across motion planning, compliance control, position-controlled manipulation, and haptic teleoperation on two independent Panda platforms. By restoring a modern, reliable, and open ROS 2 ecosystem for the Panda, this work lowers the barrier to developing safe, responsive, and reproducible human-robot collaboration applications that integrate planning, perception, interaction, and shared autonomy. Code and videos are available on our website at https://sites.google.com/unisa.it/fer-ros2.

0.53

CLIS-MPPI: Closed-Loop Model Predictive Path Integral Control With Initial-State Sampling Under Execution Delay

cs.RO ·2026-10-15 ·Zidong Liu, Xu Chen
similarity 0.60
Abstract · 65th IEEE Conference on Decision and Control (CDC 2026)

Sampling-based motion planning such as Model Predictive Path Integral (MPPI) control has become attractive for robotics due to its ability to handle nonlinear dynamics and non-smooth objectives without gradient information, while leveraging parallel rollout computation for real-time performance. However, in real-world robotic systems, the optimized control input is often applied after a non-negligible planning delay, causing a mismatch between the state used in forward simulation and the actual state at control execution, which can significantly degrade planning accuracy and may even lead to unsafe behavior such as collisions. This paper proposes Closed-Loop MPPI with Initial-State Sampling (CLIS-MPPI), which explicitly addresses execution-time state mismatch by modeling planning delay as a distribution over plausible execution-time initial states, performing rollout optimization from sampled initial states, and applying a rollout-based local feedback correction during control execution. The proposed method is validated through real-world experiments on a 6-DoF UR5e manipulator in a narrow-passage task involving obstacle avoidance and end-effector target reaching. Across 5 real-world runs of the same task, standard MPPI collided in 2 runs, whereas CLIS-MPPI remained collision-free in all 5 runs. Averaged over all collision-free runs for each method (3 for MPPI and 5 for CLIS-MPPI), CLIS-MPPI reduced the average task completion time from 25.4s to 24.4s and the average end-effector path length from 0.456 m to 0.425 m. It also reduced the overall joint-position and joint-velocity root mean square errors (RMSEs) from 0.100 rad and 0.108 rad/s to 0.017 rad and 0.011 rad/s, respectively. These results demonstrate improved safety, planning-execution consistency, and motion smoothness.

0.11

Continuous-Time Safe Planning and Control for Agile Quadrupeds

cs.RO ·2026-10-26 ·Gage MacLin, Mason Peterson, Camilla Tabasso, Venanzio Cichella, Joshua Migdal +2 more
similarity 0.60
Abstract

Agile quadruped navigation in dynamic environments demands trajectories that are both dynamically feasible and provably collision-free. Most real-time planners achieve tractability through a convex reduction that requires simplified kinematic models, discarding motion that the robot can readily execute, and certify safety only at discretization points, leaving open possible inter-sample collisions with moving obstacles. We present a real-time motion planning framework that retains the fully-actuated $SE(2)$ model of a quadruped, with its anisotropic, heading-coupled velocity bounds, and accepts the resulting nonconvexity. By parameterizing trajectories as composite Bernstein polynomials, we exploit the convex hull property to certify collision avoidance and the input bounds over the entirety of each planning horizon. Solved at online replanning rates, the optimization runs in closed loop, commanding body velocities to the locomotion controller. We validate the approach in simulation against ablations and external baselines, and in hardware experiments on a quadruped navigating among unknown moving obstacles, recovering both lateral and heading-coupled motion that simplified models exclude.

0.25

Control Barrier Functions for Safety-Aware Latent-Space Motion Planning

cs.RO cs.AI ·2026-11-01 ·Chandrakiran Ravula, Siddhanth Ramesh
similarity 0.60
Abstract · 8 pages, 2 figures

Latent-space path planning (LSPP) compresses the configuration space of a robotic manipulator into a compact, differentiable manifold learned by a variational autoencoder, enabling fast gradient-based planning without explicit inverse kinematics. Existing LSPP frameworks enforce obstacle avoidance with a binary collision classifier, whose saturated gradients near obstacle boundaries and lack of temporal structure cause the optimizer to stall and provide no forward-invariance guarantee. We replace the classifier with a neural control barrier function (CBF) learned directly in the latent space. The barrier is trained with a three-term objective that combines safe and unsafe sign constraints with a discrete-time decrease condition evaluated on transitions of an obstacle-blind nominal planner, and it is enforced at planning time by a closed-form, first-order correction that projects each goal-directed latent step back onto the CBF constraint. On a 7-DoF Franka Panda manipulator, the CBF planner achieves a 75.6\% success rate on a fixed-obstacle task, 12.0 percentage points above the best of 35 tuned classifier configurations, and 83.8\% on a multi-position task. A sweep of the decay rate $α$ characterizes the safety--performance trade-off, with the best operating points in $α\in [0.10, 0.20]$. In a fully general random-obstacle setting, success drops to 33.0\%, which we trace to covariate shift between the obstacle-blind training transitions and the states visited by the corrected planner.

0.26

Coordinated Motion Planning for Multi-Arm Systems via Iterative LQ Games

cs.RO ·2026-08-27 ·Junyoung Kim, Hanwen Ren, Lei Zhang, Ahmed H. Qureshi
similarity 0.60
Abstract

Multi-agent motion planning for high-degree-of-freedom robotics manipulators in shared workspaces remains a fundamental yet challenging problem. Centralized planners often suffer from poor scalability, while decentralized approaches face robustness and safety concerns. Game-theoretic formulations offer a promising approach for modeling agent interactions, potentially overcoming these limitations. However, their application to articulated multi-arm systems remains limited. This paper presents an iterative Linear Quadratic (LQ) game framework for multi-manipulator motion planning, where each manipulator is modeled as an independent agent optimizing its own objective while interacting with other agents based on shared global states and collision constraints. The method solves a series of local LQ games by linearizing the dynamics and approximating the cost around a nominal trajectory, with Riccati backward recursions yielding feedback Nash strategies. To address the challenges of articulated systems, we incorporate differentiable penalties for self-collision and inter-arm collision into the optimization pipeline, enabling coordinated, collision-aware trajectory generation. Experiments demonstrate that our framework produces smooth, safe, and efficient trajectories in high-dimensional settings, outperforming traditional methods. This highlights the effectiveness of differential game formulations for multi-robot manipulation.

0.25

ReVAMP: Vector-Accelerated Motion Planning for Kinematically-Constrained Systems via Reparameterization

cs.RO ·2026-09-24 ·Shrutheesh R. Iyer, Thomas Cohn, Zachary Kingston
similarity 0.60
Abstract

Robots often must satisfy one or more constraints during motion planning for real-world tasks. When such constraints reduce the valid configuration space to a measure-zero subset, sampling based planning algorithms require modifications to draw feasible samples. For many common end-effector constraints, parameterizations built on inverse kinematics (IK) provide an alternate formulation where the constraints are satisfied by construction, allowing directly sampling the feasible set. Despite their elegant approach, parameterized planners have remained slower than vector-accelerated implementations of projection-based approaches, leaving their performance ceiling an open question. We explore a new axis of vectorization built upon reparameterizing the planning space through analytic IK. This approach addresses existing inefficiencies in vectorized projection-based planners and exposes new opportunities for parallelism within the planner. We show that the planner can synthesize plans in microseconds to milliseconds for high dimensional systems (up to 20 dimensions), with complex constraints, up to 10x faster than the current state-of-the-art. Furthermore, we demonstrate how such planning speeds open up avenues for restructuring sequential manipulation pipelines.

0.19

Dual Process Motion Planning

cs.AI cs.RO ·2026-09-01 ·Jiayi Yan, Francesco Fabiano, Alessandro Abate
benchmark similarity 0.60
Abstract

Robotic systems are deeply embedded in both industry and everyday life, where they are expected to act with speed, precision, and reliability. Classical control and planning methods have long delivered strong guarantees, but often at the cost of computational efficiency and adaptability. More recently, learning-based approaches have shown promise in overcoming these limitations, enabling agents to leverage experience to accelerate decision-making and address previously intractable problems. In this work, we bridge these two approaches through a neuro-symbolic perspective on nonlinear motion planning. Inspired by the Thinking Fast and Slow paradigm, we introduce a dual-process architecture that combines the strengths of robust reasoning and learning. Our framework integrates state-of-the-art symbolic solvers as a ``System-2'' component with experience-driven ``System-1'' modules. A metacognitive controller dynamically orchestrates their interaction, selecting when to rely on fast intuition versus slower, more precise reasoning. By evaluating the framework across diverse nonlinear benchmark environments, we demonstrate that this architecture yields consistent gains in planning efficiency, accuracy, and generalization, while promoting reuse across tasks. The results suggest that tightly coupling learning with structured reasoning offers a scalable path toward more capable and adaptive robotic systems.

0.37