CS Paper Radar

Keeping the Franka Emika Panda alive: a ROS 2 stack with a reliable position interface

Antonio Langella, Davide Risi, Vincenzo Petrone, Enrico Ferrentino, Pasquale Chiacchio

cs.RO ·submitted 2026-08-20 07:37 UTC · v2
publishedcode/datahot direction

Abstract

This paper presents an open-source software stack that restores ROS 2 support for the Franka Emika Panda robot while resolving the long-standing unreliability of its external position control interface. We first analyze the root causes of unstable position control and show that the observed vibrations and protective stops arise from the timing of the external control loop and sampling jitter, rather than from limitations of the robot itself. Building on this analysis, we introduce an asynchronous hardware interface that decouples real-time communication from the ROS 2 control loop, a rate-matching mechanism for slower command sources, and a position-domain reference generation strategy that produces reliable, smooth position commands. Experimental validation shows that the proposed architecture reliably tracks velocity references by reducing motion artifacts introduced by the official implementation, and the stack is validated across motion planning, compliance control, position-controlled manipulation, and haptic teleoperation on two independent Panda platforms. By restoring a modern, reliable, and open ROS 2 ecosystem for the Panda, this work lowers the barrier to developing safe, responsive, and reproducible human-robot collaboration applications that integrate planning, perception, interaction, and shared autonomy. Code and videos are available on our website at https://sites.google.com/unisa.it/fer-ros2.

Comment
12 pages, 10 figures
Journal ref
Proceedings of the 23rd International Conference on Informatics in Control, Automation and Robotics (ICINCO) - Volume 1: COBOTA; 2026; ISBN 978-989-758-870-9; ISSN 2184-2809, SciTePress, pages 918-929
DOI
10.5220/0015508000004979

Closest papers

Nearest neighbours by meaning across the whole index.

Sub-Millisecond Reflexes for Continuous Physical Human-Robot Interaction

cs.RO eess.SY ·2026-10-15 ·Jon Škerlj, Sami Haddadin
code/datahot direction similarity 0.71
Abstract · Submitted to IEEE, source code available at: https://github.com/RoboRef/franka_reflex_engine

Continuous physical human-robot interaction requires robots to rapidly adapt their control behaviour without interrupting task execution. However, existing ROS 2 control architectures rely on stop-to-switch mechanisms that introduce substantial delays and interrupt execution. We present an open-source, sub-millisecond reflex engine based on an enhanced ROS 2-compatible multimode controller that enables deterministic switching between control modalities and integrates reflex behaviours for mitigating contact hazards and kinematic limit violations. Experiments on a Franka Robotics manipulator demonstrate switching delays below 0.1 ms, more than four orders of magnitude faster than conventional ros2_control, while maintaining continuous operation during safety-critical events. In a multi-stage manipulation task, the proposed framework reduced execution time by 3.5% and peak trajectory jerk by more than threefold. By eliminating runtime middleware overhead, controller transitions are implemented as lock-free pointer operations, enabling reflex-level responsiveness within an open-source robotics framework.

0.38

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

cs.RO ·2026-10-09 ·Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann
similarity 0.63
Abstract · 8 pages, 3 figures and 2 tables

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

0.34

ROS2MR: Connecting ROS 2 Motion Planning to Mixed-Reality Trajectory Visualization

cs.HC cs.RO ·2026-11-09 ·Santiago Berrezueta-Guzman, Habiba-Loai Khalil, Andrei Koshelev, Stefan Wagner
similarity 0.63
Abstract · Pre-print submitted in Elsevier

Mixed reality (MR) allows users to inspect planned robot motion within their physical surroundings, but displaying trajectories from robotics software requires converting their joint configurations and timing into a format the MR application can play back. This paper presents ROS2MR, an extension of the MR-Robotics LAB platform that converts YAML-serialized ROS 2 joint trajectories, including MoveIt motion plans, into the platform's existing JSON playback format. The converter validates the input, maps arm joints by name, and resamples the trajectory at a nominal rate of 30 Hz, using cubic Hermite interpolation when joint velocities are supplied and linear interpolation otherwise, while binary gripper commands are sampled separately using a zero-order hold. A Python export helper combines sequences of motion plans and gripper states into a single trajectory and checks positional agreement at segment boundaries. The MR application was also adapted for Apple Vision Pro in addition to Meta Quest 3. A technical evaluation showed that the converter preserved the normalized duration and endpoint configurations for dense, sparse, and irregularly timed inputs. With supplied velocities, the position RMSE was approximately 2.91x10^-5 degrees for all sampling patterns; without them, sparse input increased it to 0.85 degrees, and close positional agreement did not guarantee accurate velocity profiles. A pick-and-place sequence retained its open--closed--open gripper order, although off-grid transitions were shifted to the output sampling grid. The resulting file-based pathway enables inspection of ROS-generated trajectories in MR without a live ROS connection.

0.20

A Sim-to-Real Integration Pipeline for Training and Deployment of Chunk-Based VLA Manipulation Policies

cs.RO ·2026-09-18 ·Mathilde Kappel, Clémence Grislain, Mohamed Chetouani, Olivier Sigaud, Louis Annabi +3 more
publishedcode/data similarity 0.63
Abstract · Accepted at IROS 2026 Workshop on Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics

Vision-Language-Action (VLA) models have become a prominent paradigm for mapping multimodal inputs, including semantic instructions, visual observations of the scene, and proprioceptive observations, to robot actions. Most state-of-the-art models predict actions in the end-effector pose space as sequences of action chunks. Training and evaluating these models requires large-scale collections of real-world demonstrations, pairing robot actions with the corresponding visual and proprioceptive observations. Collecting such data on real hardware typically relies on human teleoperation, making the process costly, time-consuming, and difficult to scale. We present an open-source sim-to-real experimental protocol that addresses this bottleneck: expert trajectories generated in simulation are replayed open-loop on a real Franka FR3 setup, where the corresponding real visual and proprioceptive observations are recorded and converted into a format compatible with VLA training. The same deployment stack is then reused, in closed-loop, to evaluate a trained policy on that setup, so that data collection and evaluation share an identical hardware configuration. Because each real recording is paired with the simulated trajectory that produced it, the protocol also yields a direct measurement of the sim-to-real gap. We release the collected datasets on Hugging Face together with the pipeline source code https://gitlab.isir.upmc.fr/kappel/sim2real_public_chunk_control.

0.34

Online Sim-to-Real Adaptation via Closed-Loop System Modeling

cs.RO ·2026-09-24 ·Yuhao Huang, Samuel A. Moore, Boyuan Chen
similarity 0.63
Abstract

Sim-to-real transfer has made substantial progress, but can still produce controllers that remain stable and functional on hardware while suffering from degraded tracking accuracy due to residual dynamics mismatch. Correcting these errors typically requires identifying the underlying system dynamics, adapting the control policy, or returning to simulation for additional training and finetuning, all of which can require substantial data and computation. We propose OSRAM (Online Sim-to-Real Adaptation via Closed-Loop System Modeling), a framework that instead adapts the reference commands provided to an existing controller. OSRAM treats the deployed robot and its policy as a unified closed-loop dynamical system and learns its task-level command-response behavior directly from tracking observations. A closed-loop dynamics model is meta-trained across randomized dynamics in simulation and rapidly finetuned after deployment using limited real-world interaction. The adapted model is then used to optimize future reference commands while leaving the underlying control policy unchanged. We evaluate OSRAM on bipedal velocity tracking and loco-manipulation in simulation and on hardware. Results show that closed-loop modeling improves prediction and tracking accuracy under unseen dynamics, while online reference adaptation reduces residual sim-to-real tracking errors across different control objectives and hardware configurations. These results demonstrate that adapting the behavior of the robot-policy closed loop provides a practical alternative to finetuning the policy or identifying the full physical dynamics for sim-to-real transfer. More information can be found at http://generalroboticslab.com/OSRAM.

0.35

RoboPace: Contact-Aware Time-Optimal Retiming for Action-Chunk Policies

cs.RO ·2026-10-07 ·Mimo Shirasaka, Takehiko Ohkawa, Takuya Okubo, Nicola Scianca, Tatsuya Matsushima +1 more
similarity 0.63
Abstract · Project: https://robopace.airoa.io/

Robot manipulation data collection has been shifting from teleoperation toward robot-free demonstrations, through interfaces such as the Universal Manipulation Interface (UMI) or directly from human hands. Vision-Language-Action (VLA) policies trained on such data inherit the demonstrator's timing. Yet human timing does not directly transfer to robots: compliant hands tolerate fast contact, whereas robots may overshoot due to actuator and tracking limitations; conversely, robots can move faster in free space. This motivates a unified approach that reconciles execution speed with contact safety. We present RoboPace, an online retiming layer that preserves the policy's geometric path while adapting its timing, respecting the target robot's kinematic and dynamic constraints. It adapts execution speed based on predicted contact, jointly accounting for contact-dependent speed limits and the robot's motion constraints. The method requires no policy retraining and operates in real time. Across three contact-rich tasks on a dual-arm robot, faster uniform execution and physical-limit-only retiming largely fail. RoboPace instead achieves higher overall success than slow uniform execution while completing four of five commands in approximately half the time, retaining the reliability of slow execution without its time cost.

0.51

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.62
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Execution-Aligned Progressive Noise for Consistent Asynchronous Replanning in Generative Robot Policies

cs.RO ·2026-10-05 ·Di Wu, Ping Liu, Xuhua Chen, He Zheng, Lingfeng Zhang +1 more
code/data similarity 0.61
Abstract · 8 pages, 7 figures, 5 tables. Project page: https://embodied.magiclab.top/works/eapn/index.html

Continuous asynchronous replanning is essential for real-time generative robot policies, but independent stochastic initialization can cause mode switching and inconsistent continuation across action chunks. We propose Execution-Aligned Progressive Noise (EAPN), which introduces structured stochasticity at both inter-chunk and intra-chunk levels. Across replanning steps, EAPN propagates a shared noise trajectory and aligns it with the actual execution displacement, establishing execution-aligned inter-chunk correlation. Within each action chunk, it models temporal correlation along action time. The aligned stochastic history is further combined with committed action context to condition subsequent generation, allowing new chunks to continue from execution-consistent generative states rather than restart from independent noise. We evaluate EAPN on D3IL, Kinetix, LIBERO, and real-world manipulation tasks. EAPN improves multimodal behavior consistency on D3IL and achieves an average success rate of 88.59% on Kinetix. On LIBERO, it remains robust and maintains strong task performance even under long inference delays. Real-robot experiments further achieve 90.0% success on Object Storage and 96.7% on bimanual Cloth Folding, demonstrating reliable continuous execution under asynchronous replanning.

0.38