CS Paper Radar

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann

cs.RO ·submitted 2026-10-09 16:48 UTC · v1

Abstract

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

Comment
8 pages, 3 figures and 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

cs.RO eess.SY ·2026-09-28 ·Anupam Chatterjee, Arpita Kumari
published similarity 0.68
Abstract · 6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CIN…

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

0.43

Towards Path-Creative Navigation: Robot Navigation through Embodied Interaction

cs.RO ·2026-10-08 ·Haoyu Xi, Siwei Cheng, Xiangyuan Liu, Brenda Li, Wei Zhang
similarity 0.65
Abstract

Autonomous navigation in cluttered and constrained environments typically assumes a fixed environment and searches only for paths within existing free space. However, a route can be blocked by an articulated structure, a movable object, or a pedestrian, and reaching the goal may therefore require appropriate embodied interaction with the environment. This paper formulates Path-Creative Navigation (PCN), a navigation paradigm in which the robot recovers free space by coordinating locomotion and embodied interaction, and addresses one class of PCN tasks with a mapless framework. The vision-LiDAR-odometry framework integrates local observations, obstacle geometry, and robot-state estimates through a unified navigation system, providing stable semantic and geometric information for navigation and interaction. The traversability-aware decision method utilizes visual and LiDAR distance information to determine whether a blockage is actionable and whether it can be safely bypassed, enabling the robot to interact only when necessary while supporting articulated structure pushing, movable object pushing, obstacle avoidance, and pedestrian requests. We design simulation scenarios and evaluate different methods in both simulation and two real-world tasks that cannot be completed by conventional navigation alone without embodied interaction. These results demonstrate that our framework achieves higher task completion than the baseline methods by coordinating navigation and interaction in cluttered and constrained environments.

0.17

Do Better Imagined Rollouts Mean Better Robot Control? A Controlled Study of World-Model Evaluation Under Feedback

cs.RO ·2026-09-02 ·Dharini Raghavan, Amritpal Singh
code/datahot direction similarity 0.63
Abstract · 20 pages, 10 figures

Predictive models are increasingly used in robotics for state estimation, planning, control, and policy evaluation, yet they are often judged by open-loop prediction accuracy over a fixed horizon. In closed-loop operation, a robot repeatedly acts, receives new measurements, updates its state estimate, and recomputes control. We study this difference in a differential-drive path-tracking task with biased odometry and intermittent landmark sensing. Six state estimators are evaluated across 24 sensing conditions using trajectory replay, a 20-step measurement-free rollout, and closed-loop tracking. Replay position RMSE correlates more strongly with closed-loop cross-track RMSE than rollout error (Spearman rho = 0.923 vs. 0.774) and selects a different estimator from the closed-loop optimum in 5/24 conditions, compared with 18/24 for the rollout metric. We then vary rollout horizon and measurement-update interval. With H=20, rank agreement decreases from rho = 0.916 with measurements at every step to rho = 0.774 with no measurements. A horizon-update grid shows that long prediction horizons remain informative when regular corrections are retained, whereas long rollouts without correction can produce rankings that differ substantially from closed-loop behavior. We also test recurrent estimators trained on longer sensing outages. This improves the EKF-anchored models under combined sensing degradation, reducing GRU-EKF cross-track RMSE from 1.72 m to 1.06 m, but the gain is not consistent across isolated outages or estimator architectures. These results show that predictive-model evaluation in robotics should specify both prediction horizon and measurement-update schedule. For models used in feedback, offline rollouts are most informative when their sensing and correction pattern reflects closed-loop operation. Code is available at https://github.com/rdharini2001/Robot_World_Model

0.48

Keeping the Franka Emika Panda alive: a ROS 2 stack with a reliable position interface

cs.RO ·2026-08-20 ·Antonio Langella, Davide Risi, Vincenzo Petrone, Enrico Ferrentino, Pasquale Chiacchio
publishedcode/datahot direction similarity 0.63
Abstract · 12 pages, 10 figures

This paper presents an open-source software stack that restores ROS 2 support for the Franka Emika Panda robot while resolving the long-standing unreliability of its external position control interface. We first analyze the root causes of unstable position control and show that the observed vibrations and protective stops arise from the timing of the external control loop and sampling jitter, rather than from limitations of the robot itself. Building on this analysis, we introduce an asynchronous hardware interface that decouples real-time communication from the ROS 2 control loop, a rate-matching mechanism for slower command sources, and a position-domain reference generation strategy that produces reliable, smooth position commands. Experimental validation shows that the proposed architecture reliably tracks velocity references by reducing motion artifacts introduced by the official implementation, and the stack is validated across motion planning, compliance control, position-controlled manipulation, and haptic teleoperation on two independent Panda platforms. By restoring a modern, reliable, and open ROS 2 ecosystem for the Panda, this work lowers the barrier to developing safe, responsive, and reproducible human-robot collaboration applications that integrate planning, perception, interaction, and shared autonomy. Code and videos are available on our website at https://sites.google.com/unisa.it/fer-ros2.

0.53

Predict Before You Step: Auditable Occupancy Forecasting for Dynamic Obstacle Avoidance under Sparse Guidance

cs.RO ·2026-09-22 ·Yuhui Mao, Fen Liu, Shenghai Yuan, Tianxin Hu, Ruimeng Liu +1 more
similarity 0.63
Abstract

Legged robots under sparse waypoint guidance must avoid moving obstacles using partial, rapidly changing LiDAR observations. We present LOOP (Latent-recurrent Occupancy rollOut Policy), a local avoidance policy that connects sparse waypoint guidance to a frozen locomotion controller at 50 Hz. From occupancy and ego-velocity histories, a recurrent predictor forecasts future occupancy over a 1 s horizon by warping the current map with learned flow and visibility gates. These maps guide velocity selection through map-derived features and geometric risk estimates, providing an explicit interface for inspecting and replacing predictions. In encounter-synchronised Isaac Lab evaluations, LOOP achieves 57.1% head-on success at obstacle speeds of 2.5-3.2 m/s, exceeding a retrained reactive baseline by 8.2 percentage points. Comparisons with a rollout-free BEV policy show smaller, scenario-dependent gains from the prediction branch, including improved crossing success and reduced variability across training seeds at the highest head-on speeds. The adapter runs onboard a Unitree Go2 in 14.5 ms per step and completes all 16 real-world crossing trials without collision, demonstrating deployment feasibility.

0.17

SG-ODOM: Event-Driven Proprioceptive State Estimation with Stability-Gated Contact Updates for Legged Robots

cs.RO ·2026-11-16 ·Francesco Iotti, Chiyun Noh, Franco Angelini, Manolo Garabini, Ayoung Kim +2 more
code/data similarity 0.63
Abstract

Reliable proprioceptive state estimation for legged robots fuses inertial sensing with kinematic sensing from leg encoders. The latter assumes a foot is stationary during the stance phase; however, physical foot touchdown does not necessarily provide a stationary reference for odometry, particularly during impact and load transfer. Repeatedly applying kinematic corrections throughout the same contact phase can introduce redundant or unreliable information. We present SG-ODOM, a proprioceptive odometry framework that uses stability-gated contact selection to schedule kinematic updates. Following physical touchdown, a stability gate accepts the contact for state estimation only after the foot reaches a sufficiently stable support condition. The resulting validated touchdown event triggers an estimator correction, while additional timeout updates bound the maximum duration of uninterrupted IMU propagation. The framework is evaluated on multiple legged platforms, both quadrupedal and humanoid robots, against representative state-of-the-art proprioceptive estimators. Across the evaluated sequences, SG-ODOM demonstrates competitive or superior estimation accuracy, reducing Relative Pose Error (RPE) by up to 25% compared to the baseline estimator on outdoor sequences from the GrandTour dataset. Source code: https://github.com/ori-drs/SG-ODOM. Video: https://youtu.be/-583_RyuhqQ

0.38

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

cs.RO ·2026-09-27 ·Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava
similarity 0.62
Abstract

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller capable of handling multiple terrains is ideal, eliminating the need for multiple specialized controllers. We propose a multi-terrain controller to enhance the versatility and robustness of bipedal locomotion. Building on previous work with a stance ankle motor for stability on inclined and rough surfaces, this paper extends capabilities to steep wet uneven grassy slopes, and compliant terrains such as sand, gravel, rocks, and constrained terrains like staircases. To address the unique demands of these terrains, we introduce a new impact map that is essential for maintaining performance and robustness against unseen terrains. We also discuss in detail the control structure for real-time deployment on the robot. We validate our controller on the 20 degree-of-freedom Cassie bipedal robot.

0.23

RAGNAROK: Radar-Aided Gravity-Normalized Alignment for Robust Open Keyframe-based Radar-Visual-Kinematic-Inertial SLAM

cs.RO ·2026-10-08 ·Hanjun Kim, Chiyun Noh, Sangwoo Jung, Jaehyung Jung, Simon Boche +3 more
top venuecode/data similarity 0.62
Abstract

Legged robots offer superior mobility in unstructured environments, but reliable operation in such conditions requires robust state estimation. To address the vulnerability of proprioceptive estimators in rough terrain, recent methods have incorporated radar to provide velocity measurements. However, their limited yaw observability still leads to drift, and failure-aware fusion for adverse environments remains underexplored. In this letter, we present RAGNAROK, the first radar-visual-kinematic-inertial SLAM designed for robust operation in challenging environments. It integrates slip- and rolling-contact-aware leg velocity estimation, a kinematics-aware radar factor, and degradation-aware image enhancement. We further incorporate a B-spline-based radar-aided proprioceptive backbone, adaptive weighting, and online extrinsic calibration. Extensive experiments on public and self-collected datasets demonstrate that RAGNAROK achieves robust performance under challenging conditions and outperforms state-of-the-art baselines. The source code and dataset are available at https://github.com/hanjun815/RAGNAROK.

0.55