CS Paper Radar

RAGNAROK: Radar-Aided Gravity-Normalized Alignment for Robust Open Keyframe-based Radar-Visual-Kinematic-Inertial SLAM

Hanjun Kim, Chiyun Noh, Sangwoo Jung, Jaehyung Jung, Simon Boche, Cedric Le Gentil, Stefan Leutenegger, Ayoung Kim

cs.RO ·submitted 2026-10-08 08:58 UTC · v1
top venuecode/data

Abstract

Legged robots offer superior mobility in unstructured environments, but reliable operation in such conditions requires robust state estimation. To address the vulnerability of proprioceptive estimators in rough terrain, recent methods have incorporated radar to provide velocity measurements. However, their limited yaw observability still leads to drift, and failure-aware fusion for adverse environments remains underexplored. In this letter, we present RAGNAROK, the first radar-visual-kinematic-inertial SLAM designed for robust operation in challenging environments. It integrates slip- and rolling-contact-aware leg velocity estimation, a kinematics-aware radar factor, and degradation-aware image enhancement. We further incorporate a B-spline-based radar-aided proprioceptive backbone, adaptive weighting, and online extrinsic calibration. Extensive experiments on public and self-collected datasets demonstrate that RAGNAROK achieves robust performance under challenging conditions and outperforms state-of-the-art baselines. The source code and dataset are available at https://github.com/hanjun815/RAGNAROK.

Closest papers

Nearest neighbours by meaning across the whole index.

Embedded Bare-Metal Radar-Inertial Odometry

cs.RO ·2026-10-05 ·Nicolai Adil Øyen Aatif, Morten Nissov, Kostas Alexis
code/data similarity 0.70
Abstract

Compact extraplanetary rovers and micro aerial vehicles require robust state estimation frameworks designed to operate under strict computational constraints in unforgiving environments. Typical solutions involving vision- or LiDAR-based sensing are computationally expensive and vulnerable to environments with perceptual degradation, making them poorly suited for resource-constrained platforms and austere conditions. Alternatively, Frequency Modulated Continuous Wave (FMCW) radar offers both robustness and computational efficiency by directly providing velocity measurements coupled with inherent resilience to perceptual degradation. These factors enable robust estimation, thereby reducing reliance on human operators for supervision to ensure platform safety in challenging environments. In this manuscript, we propose an embedded radar-inertial estimator tailored for low-compute platforms. All sensor drivers, data processing, and aided inertial navigation are performed on a single-core microcontroller, demonstrating its computational efficiency. Flight experiments show translational APE of $0.51-0.82\,\mathrm{m}$ and RPE of $<$3\,\% against motion capture, alongside closed-loop flight through an unmodified PX4 stack. The firmware and printed circuit board design are openly available on GitHub at https://github.com/ntnu-arl/embedded_rio and https://github.com/ntnu-arl/embedded_rio-pcb respectively.

0.32

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

cs.RO ·2026-10-27 ·Ziyu Cao, William Talbot, Song Li, Pakpong Chirarattananon, Fredrik Gustafsson +2 more
code/data similarity 0.66
Abstract · 18 pages

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

0.40

SG-ODOM: Event-Driven Proprioceptive State Estimation with Stability-Gated Contact Updates for Legged Robots

cs.RO ·2026-11-16 ·Francesco Iotti, Chiyun Noh, Franco Angelini, Manolo Garabini, Ayoung Kim +2 more
code/data similarity 0.64
Abstract

Reliable proprioceptive state estimation for legged robots fuses inertial sensing with kinematic sensing from leg encoders. The latter assumes a foot is stationary during the stance phase; however, physical foot touchdown does not necessarily provide a stationary reference for odometry, particularly during impact and load transfer. Repeatedly applying kinematic corrections throughout the same contact phase can introduce redundant or unreliable information. We present SG-ODOM, a proprioceptive odometry framework that uses stability-gated contact selection to schedule kinematic updates. Following physical touchdown, a stability gate accepts the contact for state estimation only after the foot reaches a sufficiently stable support condition. The resulting validated touchdown event triggers an estimator correction, while additional timeout updates bound the maximum duration of uninterrupted IMU propagation. The framework is evaluated on multiple legged platforms, both quadrupedal and humanoid robots, against representative state-of-the-art proprioceptive estimators. Across the evaluated sequences, SG-ODOM demonstrates competitive or superior estimation accuracy, reducing Relative Pose Error (RPE) by up to 25% compared to the baseline estimator on outdoor sequences from the GrandTour dataset. Source code: https://github.com/ori-drs/SG-ODOM. Video: https://youtu.be/-583_RyuhqQ

0.38

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

cs.RO ·2026-10-09 ·Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann
similarity 0.62
Abstract · 8 pages, 3 figures and 2 tables

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

0.34

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

cs.RO eess.SY ·2026-09-28 ·Anupam Chatterjee, Arpita Kumari
published similarity 0.62
Abstract · 6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CIN…

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

0.43

SE(3)-LIVOM: Adaptive Multi-LiDAR-Inertial-Visual Odometry and Mapping

cs.RO ·2026-11-17 ·Gunhee Shin, Seungjae Lee, Daebeom Kim, Seoyeon Jang, Hyun Myung
publishedcode/data similarity 0.61
Abstract · 3 pages, 2 figures, 2 tables. Overall winner of the COMFORT Challenge, IROS 2026 Workshop on Data in Field Robotics. Code: https://github.co…

This paper presents SE(3)-LIVOM, the overall winner of the COMFORT Challenge at IROS 2026. The challenge asks for the trajectory of a legged robot in the GrandTour dataset, whose scenes include collapsed buildings, construction sites and snowfields. SE(3)-LIVOM runs in real time on two LiDARs, one camera and an IMU. Its frontend extends SE(3)-LIO to multiple LiDARs and a camera. Adaptive downsampling keeps the time per scan near 35 ms within and across scenes. An online backend corrects drift with a plane bundle adjustment over submaps and an incremental pose graph. With a single configuration for all scenes, the system reaches an average ATE of 1.40 cm on the six test scenes. The code is available at https://github.com/url-kaist/se3-livom-comfort.

0.67

LAG-IO: Multi-IMU State Estimation for Legged Robots Using Factor Graphs

cs.RO ·2026-10-13 ·Yicheng Zhou, Longwen Chen, Qinghua Yu, Junhao Xiao, Huimin Lu +1 more
similarity 0.61
Abstract

Robust proprioceptive state estimation is crucial for legged robots, particularly in challenging environments where exteroceptive sensors are unreliable. While traditional leg odometry typically relies on a single body-mounted inertial measurement unit (IMU) fused with leg kinematics via an extended Kalman filter (EKF), such methods are vulnerable to linearization errors and hard-contact assumptions, leading to severe drift during slippage or dynamic locomotion.In this paper, we propose LAG-IO, a factor graph-based multi-IMU state estimation framework that tightly couples measurements from a main body IMU, multiple leg-mounted IMUs, and joint encoders within a sliding-window optimization. To handle non-stationary foot-ground interactions, we introduce a continuous probabilistic contact detection module based on kernel density estimation (KDE), which adaptively scales the covariance of zero-velocity update (ZUPT) factors. Furthermore, kinematic relative position factors are formulated to structurally anchor the independent leg inertial states to the robot's main body. Experimental results on a quadruped robot across various unstructured terrains demonstrate that, compared to existing baselines, LAG-IO achieves higher planar trajectory accuracy, reduces unobservable vertical divergence, and provides smoother trajectory transitions during unstable contacts, while maintaining competitive attitude observability.

0.30

OpenJaws: An Open Hardware UMI Framework with Stereo Localization for Generalist Manipulation

cs.RO ·2026-10-27 ·Adithyavairavan Murali, Yash Oza, Karanbir Chahal, Neel Jawale, Silas De Vries +4 more
benchmarkcode/data similarity 0.61
Abstract · Project page: https://open-jaws.github.io/

Handheld data-collection interfaces such as the Universal Manipulation Interface (UMI) allow manipulation demonstrations to be gathered in the wild without a robot in the loop, but the quality of the resulting action labels is bounded by the accuracy of vision-based localization. Existing systems recover end-effector pose from monocular visual-inertial odometry, which is subject to scale ambiguity and drift, or delegate tracking to closed-source modules and external infrastructure that reintroduce cost and setup burden. We present OpenJaws, a fully open hardware and software framework for sensorized UMI that improves localization and simplifies deployment across robot platforms. OpenJaws pairs a modular, 3D-printed gripper exposing a standardized ISO adapter with a low-cost stereo camera to recover metric camera trajectories. We further introduce UMI-Loc-Bench-v1, a benchmark quantifying real-world localization accuracy for handheld data-collection devices, and show that stereo localization substantially outperforms monocular alternatives. Finally, we demonstrate that policies trained on data collected with OpenJaws can be deployed on a real robot across multiple tasks. Hardware, software, and data are released under a commercially permissive license. Code, data, and videos are available at https://open-jaws.github.io/

0.29