CS Paper Radar

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

Anupam Chatterjee, Arpita Kumari

cs.RO eess.SY ·submitted 2026-09-28 17:41 UTC · v2
published

Abstract

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

Comment
6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CINS), Dubai, UAE

Closest papers

Nearest neighbours by meaning across the whole index.

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.69
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

cs.RO ·2026-10-09 ·Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann
similarity 0.68
Abstract · 8 pages, 3 figures and 2 tables

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

0.34

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

cs.RO ·2026-09-29 ·Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić
similarity 0.67
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

0.21

Universal Navigation Interface: Robot-Free Data for Wheeled Robot Navigation

cs.RO ·2026-09-17 ·Sarvesh Prajapati, Ananya Trivedi, Lorena Maria Genua, Drake Moore, Bruce Maxwell +1 more
code/data similarity 0.67
Abstract · 8 pages, 4 figures, 7 tables. Project page: https://universal-nav.github.io/

Collecting real-world navigation data for mobile robots typically requires platform-specific teleoperation, making large-scale collection expensive and difficult to scale. We introduce Universal Navigation Interface (UNI), a robot-free data collection paradigm that uses a four-wheeled rollator walker (rollator) and smartphone to collect physically constrained human demonstrations. Because the rollator cannot climb stairs, negotiate uncut curbs, or pass through narrow gaps, demonstrations are naturally biased toward wheeled-feasible routes. Using UNI, we collect 37.2 km of real-world navigation data and recover metric trajectories that directly supervise goal-conditioned navigation models. Fine-tuning visual-navigation models on UNI reduces trajectory prediction error by 17.4-24.8% on held-out UNI demonstrations. Evaluation on other navigation datasets shows benefits that vary by dataset and metric. We further demonstrate closed-loop transfer to a powered wheelchair in curb, staircase, and curb-cut scenarios. These results support low-cost physical proxies as a practical source of navigation supervision collected without the target robot.

0.40

ToF-Wheel Odometry: Navigating Degeneration of Localization With Limited Sensing Capabilities

cs.RO cs.CV ·2026-10-10 ·Xu Yang, Wenhao Li, Zhengyu Wei, Zening Li, Longxiang Huang +1 more
top venue similarity 0.63
Abstract · 9 pages, 4 figures, 5 tables. Accepted by IEEE Robotics and Automation Letters (RA-L)

Wheel odometry provides an efficient motion prior for ground robots but is prone to transient violations such as wheel slip or terrain-induced tilt. In filtering-based odometry, these violations frequently trigger divergence when they coincide with constrained geometric observability (e.g., featureless corridors). We address this challenge by proposing ToF-Wheel Odometry (TWO), a tightly-coupled filtering framework that integrates wheel kinematics with geometric constraints from Time-of-Flight (ToF) cameras. The primary contribution of this work is a degeneracy-aware, directional covariance-shaping strategy that replaces heuristic online covariance tuning with geometry-conditioned inflation. The core idea is to infer process noise from geometric corrections with a strict reliability check. We decompose the posterior-to-prior correction into a wheel-explainable subspace and an orthogonal remainder. The process covariance is anisotropically adjusted according to the observability of the ToF update: if the geometry is degenerate in non-kinematic directions, the remainder is suppressed as sensor noise; if the geometry is distinct, it is admitted as a valid kinematic violation. Additionally, we introduce an intra-frame feedback loop that retrospectively repairs the process covariance within the current frame to reduce structural lag during bursty disturbances. Extensive experiments on challenging scenarios demonstrate that TWO improves trajectory accuracy and robustness compared to static and adaptive Gaussian filtering, robustly navigating the trade-off between kinematic reliability and limited sensing capabilities.

0.35

Enhancing Robotic Perception and Adaptability through Sensor Fusion and Origami-Inspired Designs

cs.RO ·2026-10-07 ·Namai Chandra, Jaison Jose, Kavi Arya, Shivaram Kalyanakrishnan
similarity 0.62
Abstract · 11 pages, 11 figures, 3 tables

Compact mobile robots must recover scene geometry under changing lighting and surface texture while working within tight payload and cost limits. We present a compact mobile robot that uses origami-inspired wheels for locomotion and active control of its sensing geometry. As the wheels move between terrain-adaptive configurations, the changing chassis pitch sweeps a 2D LiDAR through intermediate elevations; held wheel positions provide a chosen viewing angle. An IMU accounts for chassis attitude, and a fusion node projects LiDAR returns into the RGB-D depth stream supplied to RTAB-Map. The arrangement uses the wheel actuation already present on a sub-300 USD, sub-2 kg prototype to extend the scanner's viewing geometry. We assess depth fusion in a textureless indoor corridor and an outdoor sunlit area, with three runs per sensor configuration in each setting. Mean full-frame invalid-depth fractions fell from 21% to 11% indoors and from 48% to 18% outdoors. The prototype combines improved depth coverage with a continuously adjustable LiDAR viewpoint using the same actuation that reconfigures its wheels.

0.25

RAGNAROK: Radar-Aided Gravity-Normalized Alignment for Robust Open Keyframe-based Radar-Visual-Kinematic-Inertial SLAM

cs.RO ·2026-10-08 ·Hanjun Kim, Chiyun Noh, Sangwoo Jung, Jaehyung Jung, Simon Boche +3 more
top venuecode/data similarity 0.62
Abstract

Legged robots offer superior mobility in unstructured environments, but reliable operation in such conditions requires robust state estimation. To address the vulnerability of proprioceptive estimators in rough terrain, recent methods have incorporated radar to provide velocity measurements. However, their limited yaw observability still leads to drift, and failure-aware fusion for adverse environments remains underexplored. In this letter, we present RAGNAROK, the first radar-visual-kinematic-inertial SLAM designed for robust operation in challenging environments. It integrates slip- and rolling-contact-aware leg velocity estimation, a kinematics-aware radar factor, and degradation-aware image enhancement. We further incorporate a B-spline-based radar-aided proprioceptive backbone, adaptive weighting, and online extrinsic calibration. Extensive experiments on public and self-collected datasets demonstrate that RAGNAROK achieves robust performance under challenging conditions and outperforms state-of-the-art baselines. The source code and dataset are available at https://github.com/hanjun815/RAGNAROK.

0.55

SUPER ODOMETRY 2.0: Resilient Odometry via Hierarchical Adaptation

cs.RO ·2026-08-26 ·Shibo Zhao, Sifan Zhou, Yuchen Zhang, Ji Zhang, Chen Wang +2 more
publishedhighly cited similarity 0.62
Abstract

Resilient and robust odometry is crucial for autonomous systems operating in complex and dynamic environments. Existing odometry systems often struggle with severe sensory degradations and extreme conditions such as smoke, sandstorms, snow, or low-light conditions, threatening both the safety and functionality of robots. To address these challenges, we present Super Odometry, a sensor fusion framework that dynamically adapts to varying levels of environmental degradation. Super Odometry employs a hierarchical structure to integrate four core modules from lower-level to higher-level adaptability including adaptive feature selection, adaptive state direction selection, adaptive engine selection, and a novel learning- based inertial odometry. The inertial odometry, trained on over 100 hours of heterogeneous robotic platforms, captures comprehensive motion dynamics. Super Odometry elevates the inertial measurement unit (IMU) to equal importance with camera and LiDAR within the sensor fusion framework, providing a reliable fallback when exteroceptive sensors fail. Super Odometry has been validated across 200 kilometers and 800 operational hours on a fleet of aerial, wheeled, and legged robots, under diverse sensor configurations, environmental degradation, and aggressive motion profiles. It marks an important step towards safe and long-term robotic autonomy in all-degraded environments.

0.69