CS Paper Radar

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov, Isaac Chairez

cs.RO ·submitted 2026-11-05 14:42 UTC · v2
publishedcode/data

Abstract

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

Comment
Accepted at RiTA 2026

Closest papers

Nearest neighbours by meaning across the whole index.

MarsLab: A Martian Rover Simulator for Planetary Rover Autonomous Navigation

cs.RO ·2026-09-28 ·Hoyun Kim, Beomsu Kim, Giseop Kim
publishedcode/data similarity 0.72
Abstract · 8 pages, 11 figures. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Future Mars missions will require rover autonomy that can operate across unstructured terrain, changing illumination, atmospheric dust, and limited communication. Simulation is a practical way to study these conditions before deployment, but existing Mars-relevant resources differ in scope, including mission-oriented simulators, fixed analog datasets, task-specific environments, and open robotics interfaces. In this context, we present MarsLab, an open-source, ROS2-native Mars rover simulator for autonomy and navigation algorithm development. MarsLab combines HiRISE-derived and procedural terrain with customizable rock, crater, solar-illumination, and atmospheric-dust settings, and runs a Perseverance-class rover model in NVIDIA Isaac Sim. The runtime publishes RGB, depth, RGB-D point clouds, LiDAR, IMU, wheel odometry, and Ground Truth (GT) pose data through standard ROS2 topics. We demonstrate MarsLab with Simultaneous Localization and Mapping (SLAM) benchmarks across sensing modalities, dust levels, scene geometry, and route length, and with Visual Place Recognition (VPR) benchmarks over repeated Mars Base traversals under illumination and dust changes. The results illustrate how controlled scene variation and shared GT trajectories can be used to compare trajectory-level estimation and image-level place recognition within the same simulator. Our Project Page: https://kimhoyun-robotair.github.io/MarsLab/.

0.33

LynxScenes: A Large-Scale Real-World Benchmark for Outdoor Wheel-Legged Robot Perception, Navigation, Imagination and Reconstruction

cs.RO ·2026-10-13 ·Jun Tian, Hao Wu, Ruo Chen, Yili Liao, Hongyi Lin +3 more
benchmarkdataset similarity 0.69
Abstract · 20 pages, 9 figures. Includes appendices

Wheel-legged robots operating in outdoor spaces shared with humans require accurate perception, socially compliant navigation, future-scene reasoning, and scene reconstruction. However, existing datasets typically support these capabilities in isolation and rarely provide dense spatial and behavior-level supervision on real wheel-legged platforms. We introduce LynxScenes, a large-scale real-world dataset and benchmark collected with a LYNX M20 wheel-legged robot. It contains approximately 100K 30-s navigation clips spanning 833.6 h and 3,294.7 km, with 3.0M annotated frames. The synchronized recordings include four fisheye cameras, dual LiDARs, IMU, odometry, and robot states. Annotations comprise 20.82M oriented 3D boxes across 27 categories, 13.89M road-structure annotations, and 20 navigation instructions organized into three layers and aligned with continuous future trajectories. LynxScenes supports four complementary tasks: instruction-conditioned trajectory prediction, BEV-based perception of 3D objects and road structures, future scene prediction, and multi-view scene reconstruction. For trajectory prediction, we further introduce a log-replay-based pseudo-closed-loop evaluator that measures safety, progress, and instruction compliance beyond trajectory imitation. Extensive evaluations across representative navigation, perception, world-model, and reconstruction methods reveal substantial remaining challenges in close-range outdoor robot navigation. The dataset and evaluation toolkit are planned for public release.

0.20

EchoNav: Evidential BEV Completion from Historical Observations for Visual Navigation

cs.RO ·2026-10-20 ·Diwen Liu, Yiyang Shao, Borui Wang, Chi Zhang, Jizhuo Chen +4 more
similarity 0.69
Abstract · 9 pages, 6 figures

Visual navigation in cluttered environments requires robots to recover previously observed structure and infer obstacles and free space that remain occluded. We present a framework that combines temporal aggregation and occupancy completion in an evidential bird's-eye-view (BEV) representation predicted from short RGB sequences. A decoder adapts frozen VGGT-Omega features and combines historical residual proposals using cellwise weights and a learned no-update option. The BEV predictor produces a local map in the latest ego frame without depth or camera-pose inputs or explicit geometric warping. The evidential model treats observed free space separately and predicts occupancy with associated confidence across the remaining supported region. We train the predictor on simulated RGB sequences paired with complete and visibility-masked occupancy annotations. Our experiments evaluate navigation in simulation and on a wheeled robot, with additional demonstrations on quadruped and humanoid robots. In simulated sequential two-goal navigation, our system achieves 86.3% success, outperforming the strongest evaluated baseline by 32.2 percentage points. Across 60 wheeled-robot trials in 20 scenes, it achieves 73.3% success, compared with 33.3% for the strongest evaluated baseline.

0.13

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

cs.RO eess.SY ·2026-09-28 ·Anupam Chatterjee, Arpita Kumari
published similarity 0.69
Abstract · 6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CIN…

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

0.43

Learning to Drive on Mars: Visual Multimodal Traversability Estimation for Off-World Navigation

cs.RO ·2026-09-21 ·Darren Chiu, Cole Wilson, Andrei Tumbar, Gaurav S. Sukhatme, Steven Myint
similarity 0.68
Abstract

Autonomous navigation on Mars requires vehicles to distinguish between traversable terrains across diverse and visually challenging environments. However, progress in learning-based navigation for off-world environments has been limited by the lack of large-scale datasets. Since landing in Jezero Crater, the Mars 2020 Perseverance rover has traversed terrain ranging from sandy dunes, rocky patches, and flat bedrocks. As a result, this paper presents a dataset spanning 500 sols and 45km of trajectories driven by both human operators and the onboard planner, ENav. Our dataset contains grayscale stereo image pairs, poses, accelerometer readings, rocker-bogie angles, and estimates of tilt and wheel slip. Building on this dataset, we introduce an uncertainty-aware traversability-estimation framework that learns terrain representations from multimodal driving experience. We compare our proposed method against existing approaches on the Mars 2020 dataset and show that our method achieves an AUROC of 0.874 and an F1 score of 0.758, outperforming the strongest baseline by 0.058 and 0.156, respectively, while also achieving the highest average precision and recall. Finally, we show that the visual representations can be integrated into path planners, such as ENav, on a physical rover test bed. Videos, code, and the M2020 dataset will be available at https://darren-chiu.github.io/learning-to-drive-on-mars.

0.23

ERA: Error-Resistant Autonomous Object Navigation with Predicted Depth

cs.RO ·2026-11-13 ·Shunyang Huang, Shuo Wang, Wenyuan Xie, Mingyu Lin, Yue Ding +1 more
similarity 0.68
Abstract

Depth and 3D foundation models can predict geometry from RGB images, allowing zero-shot object navigation without a depth sensor. However, when predicted depth is mapped as if it came from a sensor, view-dependent errors accumulate in the map, remove exploration goals, and end the search before the agent can observe and correct them. We propose ERA, a training-free object navigation system that replaces the depth sensor with depth predicted from RGB images and poses. ERA follows a paradigm we call Move with Error: movement provides new views that correct map errors, and the corrected map enables further movement. It realizes this paradigm with revisable occupancy and with exploration from reachable viewpoints, which continues the search when no frontier remains, and verifies the target across views before stopping. On three benchmarks, ERA achieves state-of-the-art performance among training-free methods without depth sensors. Its map and exploration components also raise VLFM's success from 10.8% to 61.7% under the same predicted depth. We further deploy ERA on a real robot.

0.23

Robo-Harness K1: Harnessing Robot-Use Agents via Perception Augmentation

cs.RO ·2026-09-24 ·Zexi Li, Yehang Zhang, Wenqian Li, Haojian Huang, Chenxu Wang +10 more
highly cited similarity 0.68
Abstract · preprint

Foundation vision-language models (VLMs) understand objects, instructions, and spatial relations, yet translating this capability into robotic manipulation remains difficult. Vision-language-action (VLA) models require extensive demonstrations and may compromise pretrained understanding, while direct RGB-only VLM control is costly and strongly dependent on model capability. We introduce Robo-Harness K1, a robot-use agent (RUA) framework that exposes perception as tools. The agent queries calibrated depth, persistent visual anchors, spatial measurements, and grasp hypotheses, then selects generic motions from the returned evidence. This interface makes 3D geometry accessible without changing the VLM architecture or training a depth encoder. On matched LIBERO-PRO tasks, Gemini 3.7 Flash with K1 reaches 77.8% accuracy, surpassing GPT-6 Astra's 61.1% with an RGB-only harness; K1 further improves Astra to 88.9%. Without target fine-tuning, Gemini with K1 transfers to three RoboSuite arms and dual-arm RoboTwin tasks. On RoboTwin, it achieves 32.0% on Easy and 28.0% on Hard, showing resilience to visual and environmental perturbations. K1 also produces tool-call traces aligned with next-token training. A Qwen3.5-9B student trained on only 107 teacher episodes reaches 44.2% accuracy on new initial states versus 30.2% for OpenVLA, and 13.9% on held-out task conditions versus 0.0% for OpenVLA. These results suggest that perception-augmented RUAs offer a promising route to sample-efficient, generalizable robotic policies that leverage VLM capabilities through an accessible tool interface.

0.44

PathLift: Depth-Conditioned Metric Lifting for Visual-Navigation Priors

cs.RO ·2026-10-12 ·Gwanjun Shin, Hyeongseok Suh, Hongmo Jung, Jongwoo Lim
published similarity 0.68
Abstract · 9 pages of main text, accepted to CoRL 2026

Generalist visual-navigation policies tell a robot which direction to go but not how far. A separate lifting step is needed at deployment to convert their unitless trajectory into a metric path that a controller can track; existing scalar lifters apply uniform scaling that misses per-waypoint corrections, while in-policy approaches that inject monocular depth into the policy inherit the prediction errors of the depth model near obstacles and at close range. We present PathLift, a per-waypoint depth-conditioned adapter that lifts a pre-trained visual-navigation policy by consuming an explicit, sensor-grade depth source (RGB-D, stereo, or projected LiDAR) and fitting per-waypoint magnitude and lateral residuals to a canonicalized prior. PathLift consistently improves closed-loop navigation across diverse visual-navigation policies in simulation and on a real wheeled robot under both stereo and LiDAR depth. By turning the policy's unitless intent into a depth-feasible metric path in a single feed-forward pass, the adapter lifts real-world success without test-time optimization.

0.29