CS Paper Radar

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić

cs.RO ·submitted 2026-09-29 19:50 UTC · v1

Abstract

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

Comment
This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Observability Analysis of Joint Steering and Extrinsic Calibration

cs.RO ·2026-08-28 ·Subodh Mishra
similarity 0.70
Abstract

This technical report studies the local weak observability of a planar bicycle-model vehicle when vehicle pose, planar LiDAR extrinsic calibration, and steering-angle bias are estimated jointly. A Lie-derivative-based nonlinear observability analysis is used to examine stationary, straight-line, constant-curvature, and combined straight-plus-arc motion. The resulting observability matrices and nullspaces describe how pose, LiDAR translation and yaw offsets, and steering bias become coupled under different motion primitives. Stationary motion and individual motion primitives retain unobservable directions, whereas the combination of straight and curved motion removes the identified degeneracies and yields full local weak observability of the seven-state system. The analysis provides a theoretical basis for selecting calibration trajectories that sufficiently excite both steering and sensor-extrinsic parameters.

0.24

ToF-Wheel Odometry: Navigating Degeneration of Localization With Limited Sensing Capabilities

cs.RO cs.CV ·2026-10-10 ·Xu Yang, Wenhao Li, Zhengyu Wei, Zening Li, Longxiang Huang +1 more
top venue similarity 0.69
Abstract · 9 pages, 4 figures, 5 tables. Accepted by IEEE Robotics and Automation Letters (RA-L)

Wheel odometry provides an efficient motion prior for ground robots but is prone to transient violations such as wheel slip or terrain-induced tilt. In filtering-based odometry, these violations frequently trigger divergence when they coincide with constrained geometric observability (e.g., featureless corridors). We address this challenge by proposing ToF-Wheel Odometry (TWO), a tightly-coupled filtering framework that integrates wheel kinematics with geometric constraints from Time-of-Flight (ToF) cameras. The primary contribution of this work is a degeneracy-aware, directional covariance-shaping strategy that replaces heuristic online covariance tuning with geometry-conditioned inflation. The core idea is to infer process noise from geometric corrections with a strict reliability check. We decompose the posterior-to-prior correction into a wheel-explainable subspace and an orthogonal remainder. The process covariance is anisotropically adjusted according to the observability of the ToF update: if the geometry is degenerate in non-kinematic directions, the remainder is suppressed as sensor noise; if the geometry is distinct, it is admitted as a valid kinematic violation. Additionally, we introduce an intra-frame feedback loop that retrospectively repairs the process covariance within the current frame to reduce structural lag during bursty disturbances. Extensive experiments on challenging scenarios demonstrate that TWO improves trajectory accuracy and robustness compared to static and adaptive Gaussian filtering, robustly navigating the trade-off between kinematic reliability and limited sensing capabilities.

0.35

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.67
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

cs.RO eess.SY ·2026-09-28 ·Anupam Chatterjee, Arpita Kumari
published similarity 0.67
Abstract · 6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CIN…

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

0.43

Visual-Inertial RGB-D SLAM with Encoders for a Differential Wheeled Robot

cs.RO ·2026-10-30 ·Zhanghao Zhu, Yutaka Kaizu, Kenichi Furuhashi, Kenji Imou
publishedcode/datahighly cited similarity 0.65
Abstract · 11 pages. Author-accepted manuscript of the article published in IEEE Sensors Journal, 2022

Recent years have seen multiple impressive results in visual-inertial odometry (VIO) techniques, by which accurate state estimation can be achieved via the extended Kalman filter (EKF) or nonlinear optimization. However, these approaches are rarely open source, and they tend to fail in real experiments due to the temporary lack of feature points and fast motion. Therefore, in this study, we used encoders to overcome the temporary failure of purely vision-based simultaneous localization and mapping (SLAM). Here, we propose a generative measurement model for encoders and derive an expression for the maximum a posteriori (MAP) estimate and necessary Jacobians for optimization. We use our theory to present a novel tightly coupled visual-inertial encoder RGB-Depth (RGB-D) SLAM system. Tests on our system on an in-house dataset confirmed that our modeling effort led to accurate (with a root mean squared error (RMSE) of approximately 2-7 cm) and robust state estimation in real time. The source code and our dataset containing the encoder information have been published for verification.

0.74

Visual-Inertial Odometry for Ground Robots with Dynamic Camera-IMU Extrinsic Calibration

cs.RO ·2026-10-18 ·Bo Dong
similarity 0.64
Abstract

Visual-inertial odometry systems are often constrained by the assumption that sensors are rigidly mounted, which limits their adaptability in practical scenarios involving structural motion. To address this limitation, this paper investigates time-varying camera-IMU extrinsic calibration. First, a dynamic camera-IMU extrinsic calibration method based on the Denavit-Hartenberg convention is proposed by incorporating the robot kinematic model. Second, a two-step initialization strategy is developed to efficiently estimate the initial joint angles, providing a reliable starting point for subsequent extrinsic parameter optimization and enabling online estimation of timevarying camera-IMU extrinsic parameters. Simulation experiments demonstrate that the proposed framework can effectively accommodate variations in camera-IMU extrinsic parameters while maintaining competitive localization accuracy.

0.14

Learning Wheel Motion Uncertainty for Degeneracy-Aware LiDAR-Inertial Odometry on Quadrupedal Wheel-Legged Robots

cs.RO ·2026-10-19 ·Hairuo Wei, Yunfan Ren, Renda Yang, Qiangsheng Huang, Zhongyu Li
similarity 0.61
Abstract

Wheel kinematics can support odometry for quadrupedal wheel-legged robots when LiDAR geometry provides weak motion constraints. However, slip and contact loss make rolling predictions unreliable, and contact state alone cannot determine their reliability across motion directions. We propose a tightly coupled LiDAR-inertial-kinematic odometry framework that retains analytical rolling predictions and learns per-wheel, direction-dependent process covariances from proprioceptive history. The estimator maintains moving wheel-center states, allowing the learned uncertainty to regulate the influence of rolling predictions through forward-kinematic corrections. Degeneracy-aware projection (DAP) complements this mechanism by suppressing LiDAR constraints along geometrically weak directions. The learned covariance network (CovNet) is trained through a differentiable filter using simulated velocity supervision and deployed on the real robot without fine-tuning. On the six room sequences with the highest degeneracy ratios in our indoor dataset, the method reduces mean per-sequence position root mean square error (RMSE) by 66.2% relative to FAST-LIO2 and by 31.0% relative to a fixed-covariance variant. In a severely degenerate corridor run, it achieves an endpoint position error of 0.198 m, compared with 7.531 m for FAST-LIO2. These results demonstrate robust odometry under challenging geometric and wheel-motion conditions. We plan to publicly release our code and multimodal dataset. Project website: https://weihairuo.github.io/wheel-motion-uncertainty/

0.29

Reduced Order Observers for Monocular Visual Inertial Odometry

eess.SY ·2026-09-22 ·Amel Abi, Mouaad Boughellaba, Miaomiao Wang, Abdelhamid Tayebi
similarity 0.61
Abstract

This work develops a reduced order observer framework of monocular visual-inertial odometry (VIO). The key idea consists in considering the gravity vector in the body-frame as an additional state and constructing an appropriate output that relates the monocular bearing measurements and their time derivatives to the body-frame velocity. This eliminates the need for the estimation of the landmark positions, leading to a six-dimensional linear time-varying (LTV) observer for the body-frame velocity and gravity, endowed with uniform global exponential stability guarantees. These estimates are subsequently used to recover the orientation almost globally, up to an unknown constant yaw offset, and the position up to an unknown constant translation. The mixed-bearing framework is further extended to account for the inertial measurement unit (IMU) biases, yielding a twelve-dimensional LTV observer endowed with local exponential stability guarantees. Numerical simulations are provided to illustrate the effectiveness of the proposed observers.

0.15