CS Paper Radar

Observability Analysis of Joint Steering and Extrinsic Calibration

Subodh Mishra

cs.RO ·submitted 2026-08-28 09:37 UTC · v1

Abstract

This technical report studies the local weak observability of a planar bicycle-model vehicle when vehicle pose, planar LiDAR extrinsic calibration, and steering-angle bias are estimated jointly. A Lie-derivative-based nonlinear observability analysis is used to examine stationary, straight-line, constant-curvature, and combined straight-plus-arc motion. The resulting observability matrices and nullspaces describe how pose, LiDAR translation and yaw offsets, and steering bias become coupled under different motion primitives. Stationary motion and individual motion primitives retain unobservable directions, whereas the combination of straight and curved motion removes the identified degeneracies and yields full local weak observability of the seven-state system. The analysis provides a theoretical basis for selecting calibration trajectories that sufficiently excite both steering and sensor-extrinsic parameters.

Closest papers

Nearest neighbours by meaning across the whole index.

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.71
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

cs.RO ·2026-09-29 ·Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić
similarity 0.70
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

0.21

Extending Ground-Constraint LiDAR-IMU Calibration to Tilted Surfaces in a Continuous-Time Framework

cs.RO ·2026-08-25 ·Vassili Korotkine, Pierre Chamoun, Mohammed Ayman Shalaby, James Richard Forbes
code/data similarity 0.67
Abstract · 8 pages, 13 figures. Submitted to Robotics & Automation Letters

This paper presents a novel method that extends targetless LiDAR-IMU calibration for ground vehicles to non- flat environments. Calibration typically necessitates full exci- tation of the sensor rig, a requirement that is not fulfilled by ground vehicles in normal operation. To address the degenerate planar motion, state-of-the-art methods propose residuals that assume the colinearity of the gravity and physical surface normal vectors, restricting usage to cases where the ground is assumed flat. This paper proposes ground-plane residuals that do not require this assumption, and are applicable for planar motion on a tilted surface. Results are demonstrated on a dataset collected from a Husky ground vehicle, on the M2DGR dataset, as well as on an offroad vehicle dataset. Repeatability is shown to be improved both in tilted and flat-ground scenarios, with strong improvement demonstrated for the tilted case. The implementation and experiments are open-sourced at https://github.com/vkorotkine/licalib_tilted_ground.

0.43

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

cs.RO ·2026-10-20 ·Xiangcheng Hu, Xieyuanli Chen, Feiyi Chen, Shengli Ren, Shiyang Chen +6 more
similarity 0.61
Abstract · 35 pages, 20 figures, 13 tables

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

0.22

Learning Wheel Motion Uncertainty for Degeneracy-Aware LiDAR-Inertial Odometry on Quadrupedal Wheel-Legged Robots

cs.RO ·2026-10-19 ·Hairuo Wei, Yunfan Ren, Renda Yang, Qiangsheng Huang, Zhongyu Li
similarity 0.60
Abstract

Wheel kinematics can support odometry for quadrupedal wheel-legged robots when LiDAR geometry provides weak motion constraints. However, slip and contact loss make rolling predictions unreliable, and contact state alone cannot determine their reliability across motion directions. We propose a tightly coupled LiDAR-inertial-kinematic odometry framework that retains analytical rolling predictions and learns per-wheel, direction-dependent process covariances from proprioceptive history. The estimator maintains moving wheel-center states, allowing the learned uncertainty to regulate the influence of rolling predictions through forward-kinematic corrections. Degeneracy-aware projection (DAP) complements this mechanism by suppressing LiDAR constraints along geometrically weak directions. The learned covariance network (CovNet) is trained through a differentiable filter using simulated velocity supervision and deployed on the real robot without fine-tuning. On the six room sequences with the highest degeneracy ratios in our indoor dataset, the method reduces mean per-sequence position root mean square error (RMSE) by 66.2% relative to FAST-LIO2 and by 31.0% relative to a fixed-covariance variant. In a severely degenerate corridor run, it achieves an endpoint position error of 0.198 m, compared with 7.531 m for FAST-LIO2. These results demonstrate robust odometry under challenging geometric and wheel-motion conditions. We plan to publicly release our code and multimodal dataset. Project website: https://weihairuo.github.io/wheel-motion-uncertainty/

0.29

Trajectory CPHD Filtering for Multiple Turning Vehicles With Decoupled Orientation and Axial-Scale Estimation

eess.SP ·2026-09-15 ·Yunhe Cao, Yu Wan, Yuanhao Cheng, Tat-Soon Yeo, Jie Fu
similarity 0.60
Abstract · 32 pages in total, including a 15-page main article and 17 pages of supplementary material; 7 figures and 5 tables in the main article

Reliable estimation of vehicle orientation, centroid, and footprint is important for representing road-user occupancy during vehicle turns at intersections and other common road maneuvers. During a turn, the vehicle orientation and direction of motion may differ, and coupling the orientation with the axial scales can degrade both orientation and extent estimates. This paper proposes a trajectory cardinalized probability hypothesis density filter with a Decoupled Orientation and Axial-Scale Estimation (DOAM) model for multiple-vehicle tracking. The model represents the kinematic, orientation, and squared semi-axis-length states separately within each trajectory component, reducing the mutual interference between orientation variation and scale estimation without introducing an additional interacting multiple-model structure. A structured coordinate-ascent variational inference recursion jointly updates these state sequences and the measurement-source variables. The trajectory-component likelihood and weight update associated with the decoupled representation are derived while retaining the standard cardinality recursion. A fixed-lag trajectory implementation further uses current measurements to correct historical states within the smoothing window. Evaluation with signalized-intersection simulations and real onboard LiDAR measurements shows improved estimation of vehicle orientation, centroid, and extent, particularly during turns. The resulting vehicle-state and footprint estimates provide information for road-user occupancy perception and subsequent collision-risk assessment and motion planning.

0.21

ToF-Wheel Odometry: Navigating Degeneration of Localization With Limited Sensing Capabilities

cs.RO cs.CV ·2026-10-10 ·Xu Yang, Wenhao Li, Zhengyu Wei, Zening Li, Longxiang Huang +1 more
top venue similarity 0.59
Abstract · 9 pages, 4 figures, 5 tables. Accepted by IEEE Robotics and Automation Letters (RA-L)

Wheel odometry provides an efficient motion prior for ground robots but is prone to transient violations such as wheel slip or terrain-induced tilt. In filtering-based odometry, these violations frequently trigger divergence when they coincide with constrained geometric observability (e.g., featureless corridors). We address this challenge by proposing ToF-Wheel Odometry (TWO), a tightly-coupled filtering framework that integrates wheel kinematics with geometric constraints from Time-of-Flight (ToF) cameras. The primary contribution of this work is a degeneracy-aware, directional covariance-shaping strategy that replaces heuristic online covariance tuning with geometry-conditioned inflation. The core idea is to infer process noise from geometric corrections with a strict reliability check. We decompose the posterior-to-prior correction into a wheel-explainable subspace and an orthogonal remainder. The process covariance is anisotropically adjusted according to the observability of the ToF update: if the geometry is degenerate in non-kinematic directions, the remainder is suppressed as sensor noise; if the geometry is distinct, it is admitted as a valid kinematic violation. Additionally, we introduce an intra-frame feedback loop that retrospectively repairs the process covariance within the current frame to reduce structural lag during bursty disturbances. Extensive experiments on challenging scenarios demonstrate that TWO improves trajectory accuracy and robustness compared to static and adaptive Gaussian filtering, robustly navigating the trade-off between kinematic reliability and limited sensing capabilities.

0.35

Anchor-Free Hidden-Target Seeking via Certified Self-Calibration under Correlated Odometry

cs.RO eess.SY ·2026-08-26 ·Yash Bagla
similarity 0.59
Abstract · 16 pages, 8 figures

We study hidden-target seeking in an anchor-free regime where neither the vehicle, the relay, nor the target has an accessible global pose. The vehicle never senses the target directly; it receives only range-bearing observations through a single relay of unknown position and orientation, with motion known only via integrated body-frame odometry. Absolute localization is fundamentally impossible: the joint configuration retains an exact three-dimensional SE(2) gauge no estimator can resolve. Yet the quantities needed for control remain fully recoverable: motion collapses calibration to a task-relevant quotient, the relay-to-odometry yaw and target displacement, identifiable in closed form from two distinct vehicle views. We introduce an O(K) multi-view self-calibration estimator with an exact first-order yaw-uncertainty certificate that propagates the cross-view correlations integrated odometry induces: the full certificate attains 95.0% pooled coverage at the nominal 95% level, versus 82.1% when correlated poses are treated as independent. The certificate drives a hybrid policy that excites until calibration is trustworthy, refuses uncertified estimates, seeks using continuously re-measured geometry, and detects relay-frame changes via persistent certified inconsistency, avoiding unbounded dead-reckoning drift. Across 200 randomized closed-loop trials, the method attains 0.064 m median station error versus 0.065 m for an oracle given the true relay yaw, despite 27 m median dead-reckoning drift over long horizons; 90 physics-based ROS 2/Gazebo trials retain 30/30 success under nominal operation, communication degradation, and relay-frame disturbances. These results show global localization is unnecessary for reliable hidden-target seeking under this single-relay model, even when both the sensing infrastructure and the vehicle's own reference frame are uncalibrated.

0.43