CS Paper Radar

Visual-Inertial Odometry for Ground Robots with Dynamic Camera-IMU Extrinsic Calibration

Bo Dong

cs.RO ·submitted 2026-10-18 16:52 UTC · v2

Abstract

Visual-inertial odometry systems are often constrained by the assumption that sensors are rigidly mounted, which limits their adaptability in practical scenarios involving structural motion. To address this limitation, this paper investigates time-varying camera-IMU extrinsic calibration. First, a dynamic camera-IMU extrinsic calibration method based on the Denavit-Hartenberg convention is proposed by incorporating the robot kinematic model. Second, a two-step initialization strategy is developed to efficiently estimate the initial joint angles, providing a reliable starting point for subsequent extrinsic parameter optimization and enabling online estimation of timevarying camera-IMU extrinsic parameters. Simulation experiments demonstrate that the proposed framework can effectively accommodate variations in camera-IMU extrinsic parameters while maintaining competitive localization accuracy.

Closest papers

Nearest neighbours by meaning across the whole index.

Visual-Inertial RGB-D SLAM with Encoders for a Differential Wheeled Robot

cs.RO ·2026-10-30 ·Zhanghao Zhu, Yutaka Kaizu, Kenichi Furuhashi, Kenji Imou
publishedcode/datahighly cited similarity 0.65
Abstract · 11 pages. Author-accepted manuscript of the article published in IEEE Sensors Journal, 2022

Recent years have seen multiple impressive results in visual-inertial odometry (VIO) techniques, by which accurate state estimation can be achieved via the extended Kalman filter (EKF) or nonlinear optimization. However, these approaches are rarely open source, and they tend to fail in real experiments due to the temporary lack of feature points and fast motion. Therefore, in this study, we used encoders to overcome the temporary failure of purely vision-based simultaneous localization and mapping (SLAM). Here, we propose a generative measurement model for encoders and derive an expression for the maximum a posteriori (MAP) estimate and necessary Jacobians for optimization. We use our theory to present a novel tightly coupled visual-inertial encoder RGB-Depth (RGB-D) SLAM system. Tests on our system on an in-house dataset confirmed that our modeling effort led to accurate (with a root mean squared error (RMSE) of approximately 2-7 cm) and robust state estimation in real time. The source code and our dataset containing the encoder information have been published for verification.

0.74

Laser-Tracker-Assisted Camera-to-Robot Calibration for Mobile Robots

cs.RO cs.CV ·2026-09-22 ·Jan A. Rudolph, Öykü Kandemir, Markus Ulrich
published similarity 0.65
Abstract · To appear in the proceedings of Forum Bildverarbeitung 2026

We present a laser-tracker-assisted hand-eye calibration method for camera-equipped mobile robots. The method combines laser-tracker-based 3D metrology with camera-based 2D observations. Building on our previous laser-tracker-assisted camera-to-robot calibration method for ground-observing mobile robots, we present a generalized formulation for calibrating the camera pose in the coordinate system of tracker-localized mobile robots. The new approach relaxes assumptions of our previous method on robot and camera configuration by chaining multiple calibration targets resulting in a more general approach supporting various camera-equipped mobile robot systems.

0.29

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

cs.RO ·2026-09-29 ·Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić
similarity 0.64
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

0.21

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.64
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.31

MFVINS: Multiple Fisheye Camera-Based Visual Inertial System

cs.RO cs.CV ·2026-09-08 ·Eunseong Jang, YuJin Chung, Sang Jun Lee, Jihyun Yoon, HyungGi Jo
similarity 0.64
Abstract · 29 pages, 11 figures

A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.

0.29

A2I-Calib++: A Kinematics-Driven Anti-noise Active Calibration Framework for Whole-Body Multi-IMU Systems on Legged Robots

cs.RO ·2026-10-21 ·Fangyu Jiang, Chaoran Xiong, Kehui Ma, Zhen Sun, Zeyu Zhang +1 more
similarity 0.63
Abstract

Recently, multi-node inertial measurement unit (multi-IMU) systems have shown promise for robust odometry in legged robots. Multi-IMU fusion can improve legged robot odometry but requires accurate spatiotemporal calibration among the sensors. Existing multi-IMU calibration methods, designed for aerial or handheld platforms, face challenges on legged robots because routine locomotion may provide insufficient excitation, while foot slips, impacts, and vibrations introduce measurement disturbances. To address these challenges, we propose A2I-Calib++, a kinematics-driven anti-noise active calibration framework for body-mounted IMUs covered by the robot kinematic model. It estimates temporal offsets, extrinsic rotations and translations, and inertial biases through temporal correlation search followed by analytic spatial and bias estimation, without artificial calibration targets or complex parameter tuning for the target IMU. A2I-Calib++ comprises three core modules: 1) a Noise-Isotropy-Inspired Trajectory supported by a finite-horizon conditioning proposition that generates sufficient excitation to limit noise sensitivity; 2) a constraint-aware Adversarial Motion Priors controller that combines the anti-noise excitation with a rolling-contact reward for contact-aware execution; and 3) a contact-constrained virtual IMU that fuses pre-calibrated calf IMUs and joint kinematics under a rolling-contact model to construct the calibration reference. Furthermore, evaluations on both simulation and real-world quadruped platforms demonstrate notably reduced noise sensitivity and simulation calibration errors compared to conventional methods, together with repeatable real-world calibration and improved proprioceptive odometry accuracy for legged robots.

0.16

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.63
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

LBDU-VIO: Learned Bias Dynamics and Uncertainty for Visual-Inertial Odometry with Unreliable Vision

cs.RO ·2026-09-30 ·Qizhi Guo, Junning Lyu, Defu Lin, Shaoming He
similarity 0.62
Abstract · 12 pages, 8 figures

Visual-inertial odometry (VIO) for aerial robots relies on high rate inertial measurement unit (IMU) propagation between visual updates. However, conventional multi state constraint Kalman filters (MSCKFs) use random walk bias assumptions and fixed noise parameters, which can limit robustness when visual information is unreliable. To address this problem, we propose LBDU-VIO, a learning-augmented MSCKF with learned continuous time bias dynamics and an IMU uncertainty model. A neural ordinary differential equation (ODE) models continuous time bias dynamics to propagate the filter's bias states, replacing their random walk model. The IMU uncertainty model predicts motion adaptive measurement noise covariances for covariance propagation. Both models are trained with pose supervision without direct labels. Experiments on real world EuRoC and TUM-VI benchmarks show lower errors than representative visual-inertial baselines, including a 25.1% reduction in mean relative position error compared with S-MSCKF on EuRoC sequences with 10s visual outage.

0.12