CS Paper Radar

A2I-Calib++: A Kinematics-Driven Anti-noise Active Calibration Framework for Whole-Body Multi-IMU Systems on Legged Robots

Fangyu Jiang, Chaoran Xiong, Kehui Ma, Zhen Sun, Zeyu Zhang, Ling Pei

cs.RO ·submitted 2026-10-21 08:59 UTC · v1

Abstract

Recently, multi-node inertial measurement unit (multi-IMU) systems have shown promise for robust odometry in legged robots. Multi-IMU fusion can improve legged robot odometry but requires accurate spatiotemporal calibration among the sensors. Existing multi-IMU calibration methods, designed for aerial or handheld platforms, face challenges on legged robots because routine locomotion may provide insufficient excitation, while foot slips, impacts, and vibrations introduce measurement disturbances. To address these challenges, we propose A2I-Calib++, a kinematics-driven anti-noise active calibration framework for body-mounted IMUs covered by the robot kinematic model. It estimates temporal offsets, extrinsic rotations and translations, and inertial biases through temporal correlation search followed by analytic spatial and bias estimation, without artificial calibration targets or complex parameter tuning for the target IMU. A2I-Calib++ comprises three core modules: 1) a Noise-Isotropy-Inspired Trajectory supported by a finite-horizon conditioning proposition that generates sufficient excitation to limit noise sensitivity; 2) a constraint-aware Adversarial Motion Priors controller that combines the anti-noise excitation with a rolling-contact reward for contact-aware execution; and 3) a contact-constrained virtual IMU that fuses pre-calibrated calf IMUs and joint kinematics under a rolling-contact model to construct the calibration reference. Furthermore, evaluations on both simulation and real-world quadruped platforms demonstrate notably reduced noise sensitivity and simulation calibration errors compared to conventional methods, together with repeatable real-world calibration and improved proprioceptive odometry accuracy for legged robots.

Closest papers

Nearest neighbours by meaning across the whole index.

LAG-IO: Multi-IMU State Estimation for Legged Robots Using Factor Graphs

cs.RO ·2026-10-13 ·Yicheng Zhou, Longwen Chen, Qinghua Yu, Junhao Xiao, Huimin Lu +1 more
similarity 0.71
Abstract

Robust proprioceptive state estimation is crucial for legged robots, particularly in challenging environments where exteroceptive sensors are unreliable. While traditional leg odometry typically relies on a single body-mounted inertial measurement unit (IMU) fused with leg kinematics via an extended Kalman filter (EKF), such methods are vulnerable to linearization errors and hard-contact assumptions, leading to severe drift during slippage or dynamic locomotion.In this paper, we propose LAG-IO, a factor graph-based multi-IMU state estimation framework that tightly couples measurements from a main body IMU, multiple leg-mounted IMUs, and joint encoders within a sliding-window optimization. To handle non-stationary foot-ground interactions, we introduce a continuous probabilistic contact detection module based on kernel density estimation (KDE), which adaptively scales the covariance of zero-velocity update (ZUPT) factors. Furthermore, kinematic relative position factors are formulated to structurally anchor the independent leg inertial states to the robot's main body. Experimental results on a quadruped robot across various unstructured terrains demonstrate that, compared to existing baselines, LAG-IO achieves higher planar trajectory accuracy, reduces unobservable vertical divergence, and provides smoother trajectory transitions during unstable contacts, while maintaining competitive attitude observability.

0.30

SG-ODOM: Event-Driven Proprioceptive State Estimation with Stability-Gated Contact Updates for Legged Robots

cs.RO ·2026-11-16 ·Francesco Iotti, Chiyun Noh, Franco Angelini, Manolo Garabini, Ayoung Kim +2 more
code/data similarity 0.70
Abstract

Reliable proprioceptive state estimation for legged robots fuses inertial sensing with kinematic sensing from leg encoders. The latter assumes a foot is stationary during the stance phase; however, physical foot touchdown does not necessarily provide a stationary reference for odometry, particularly during impact and load transfer. Repeatedly applying kinematic corrections throughout the same contact phase can introduce redundant or unreliable information. We present SG-ODOM, a proprioceptive odometry framework that uses stability-gated contact selection to schedule kinematic updates. Following physical touchdown, a stability gate accepts the contact for state estimation only after the foot reaches a sufficiently stable support condition. The resulting validated touchdown event triggers an estimator correction, while additional timeout updates bound the maximum duration of uninterrupted IMU propagation. The framework is evaluated on multiple legged platforms, both quadrupedal and humanoid robots, against representative state-of-the-art proprioceptive estimators. Across the evaluated sequences, SG-ODOM demonstrates competitive or superior estimation accuracy, reducing Relative Pose Error (RPE) by up to 25% compared to the baseline estimator on outdoor sequences from the GrandTour dataset. Source code: https://github.com/ori-drs/SG-ODOM. Video: https://youtu.be/-583_RyuhqQ

0.38

Calibration-free IMU-based Relative Orientation Estimation under Dynamic Human Motion

cs.RO eess.SY ·2026-10-22 ·Ruiyuan Li, Hassan Osman, Ajay Seth, Manon Kok
similarity 0.65
Abstract · 8 pages, 7 figures, 1 table. Submitted to IEEE Sensors Journal

Recent magnetometer-free inertial measurement unit (IMU) methods can reduce drift in joint motion estimation using rigid-body constraints, but they typically require pre-calibrated sensor locations, assumptions of specific joint models (e.g., hinge joints) or limited motion types, or an external reference for global orientation. Furthermore, challenges related to high-frequency impacts (e.g. at foot strikes during gait) and numerical differentiation of noisy measurements have not been explicitly addressed. We propose an extended Kalman filter that estimates relative IMU orientation and sensor location simultaneously, requiring neither offline sensor location calibration nor a global orientation anchor. A systematic simulation study shows that the quality of the relative orientation and the sensor location estimates depends on different motion-intensity sources: the joint center acceleration and the relative angular velocity, respectively. A low-pass filter (LPF) is used to mitigate real-signal outliers before applying the rigid-body constraint. When applied to the OpenSense dataset with real IMU measurements across four subjects with three lower-body joint types during walking and complex tasks including various motion types, the proposed method achieves an overall relative orientation error of 2.61°, compared with 10.40° for a baseline using offline-estimated sensor locations and 7.43° for a baseline using marker-derived sensor locations. These results show that the proposed calibration-free estimation framework handles real IMU data effectively and achieves accurate relative orientation without offline sensor location calibration.

0.16

Visual-Inertial Odometry for Ground Robots with Dynamic Camera-IMU Extrinsic Calibration

cs.RO ·2026-10-18 ·Bo Dong
similarity 0.63
Abstract

Visual-inertial odometry systems are often constrained by the assumption that sensors are rigidly mounted, which limits their adaptability in practical scenarios involving structural motion. To address this limitation, this paper investigates time-varying camera-IMU extrinsic calibration. First, a dynamic camera-IMU extrinsic calibration method based on the Denavit-Hartenberg convention is proposed by incorporating the robot kinematic model. Second, a two-step initialization strategy is developed to efficiently estimate the initial joint angles, providing a reliable starting point for subsequent extrinsic parameter optimization and enabling online estimation of timevarying camera-IMU extrinsic parameters. Simulation experiments demonstrate that the proposed framework can effectively accommodate variations in camera-IMU extrinsic parameters while maintaining competitive localization accuracy.

0.14

\textbf{PLATO}: \emph{Preintegration Learning from Accurate Trajectory Observations} for Neural Inertial Odometry

cs.RO eess.SY ·2026-09-06 ·Haoying Li, Qihang Liu, Yifan Peng, Keyan Miao, Junfeng Wu
similarity 0.62
Abstract

Neural inertial odometry has demonstrated strong potential for motion estimation in challenging environments, yet inertial-only preintegration remains sensitive to IMU bias and uncertainty. To this end, this paper introduces \textbf{PLATO}:~\emph{Preintegration Learning from Accurate Trajectory Observations}, a likelihood-based framework that leverages accurate trajectory observations to jointly learn IMU bias dynamics modeled by a neural ordinary differential equation~(NODE) and gyroscope and accelerometer noise covariances. Optimization exploits the sparse structure of the negative log-likelihood, with IMU noise-parameter gradients computed by forward differentiation. A tailored double-adjoint scheme couples a discrete invariant-error adjoint with a continuous-time adjoint for the bias NODE, enabling memory-efficient likelihood optimization over the nested bias-dynamics and IMU-preintegration rollouts. Validation on EuRoC shows improved performance, and underwater robot experiments demonstrate applicability under intermittent lighting failures and visual degradation.

0.20

Contact-Constrained Lower-Limb Joint-Offset Calibration for Humanoid Robots

cs.RO ·2026-09-02 ·Kaixiang Lu, Haiyu Lan, Chunxiao Qiao, You Li, Chengyuan Luo +3 more
top venue similarity 0.62
Abstract

Accurate joint encoder offsets are essential for kinematic consistency in humanoid lower limbs, yet existing calibration methods typically require external motion-capture systems or fiducial targets. We present a self-contained calibration framework exploiting only onboard joint encoders and a pelvis-mounted IMU during static double-support contact. The inter-foot transform from forward kinematics must stay constant when both feet are fixed; minimizing its posture-dependent dispersion yields a nonlinear least-squares problem over the 12-dimensional offset vector. A Hessian eigenstructure analysis shows that parallel pitch axes induce a rotational coupling. Orientation residuals then observe only the pitch-offset sum, while translation and posture diversity set the remaining numerical observability. For the A3 pitch-to-roll-to-yaw ordering, hip-roll and hip-yaw excitation reduce hip-pitch coupling. A standing-posture knee prior then anchors the remaining weak pitch-chain decomposition. Simulation and real-machine injection tests show consistent recovery, and on held-out recordings calibration reduces foot-height RMS residuals from 4.26 to 2.20 mm on A3 and from 8.03 to 1.43 mm on A2. An independent LiDAR-inertial reference checks the pitch-coupled channel. Removing an injected pitch offset moves the leg-odometry vertical drift back toward the LiDAR trajectory. A few static double-support stances thus provide contact-consistent corrections for well-excited directions. Individual offsets in the weak pitch chain remain prior-dependent.

0.44

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

cs.RO ·2026-10-27 ·Ziyu Cao, William Talbot, Song Li, Pakpong Chirarattananon, Fredrik Gustafsson +2 more
code/data similarity 0.61
Abstract · 18 pages

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

0.40

Moving Horizon Estimation and Constrained Model Predictive Control for Balancing a Wheel-Legged Robot Under Unknown Disturbances

eess.SY ·2026-11-03 ·Haitham El-Hussieny
similarity 0.61
Abstract

Wheel-legged robots balance on two wheels while using articulated legs to change height, absorb impacts, and cross uneven terrain. On hardware, the balance controller must rely on noisy inertial and encoder measurements, and it must reject disturbances that are not known in advance, such as payloads and wind, without exceeding motor torque limits. This paper presents a moving horizon estimator (MHE) combined with an offset-free, constrained model predictive controller (MPC) for the sagittal balance of a 9.95 kg wheel-legged robot. The estimator uses a virtual-leg model augmented with a horizontal hip force, a body pitch torque, and a gyroscope bias. Its accelerometer model removes the predicted hip acceleration, and its process noise is increased when an impact is detected. We evaluate the approach in MuJoCo with simulated sensor noise, bias, quantization, and delay, and compare it with LQR baselines that use ground-truth state, a complementary filter, or the same MHE. In a driving, squatting, reversing, and bowing sequence, MPC with MHE reduced the RMS speed error to 0.11 m/s, compared with 0.24 m/s for LQR with ground-truth state. Under an unknown 2 kg payload and a 10 N headwind, the mean position error in wind was 6 cm, compared with 81 cm for LQR with ground-truth state. Across a 3 $\times$ 4 grid of payloads and headwinds, LQR with the same estimator fell in 3 of 12 combinations, compared with 1 of 12 for MPC. These results are limited to simulation on flat ground, and experimental validation on hardware remains future work.

0.14