CS Paper Radar

Sub-Millisecond Reflexes for Continuous Physical Human-Robot Interaction

Jon Škerlj, Sami Haddadin

cs.RO eess.SY ·submitted 2026-10-15 14:00 UTC · v1
code/datahot direction

Abstract

Continuous physical human-robot interaction requires robots to rapidly adapt their control behaviour without interrupting task execution. However, existing ROS 2 control architectures rely on stop-to-switch mechanisms that introduce substantial delays and interrupt execution. We present an open-source, sub-millisecond reflex engine based on an enhanced ROS 2-compatible multimode controller that enables deterministic switching between control modalities and integrates reflex behaviours for mitigating contact hazards and kinematic limit violations. Experiments on a Franka Robotics manipulator demonstrate switching delays below 0.1 ms, more than four orders of magnitude faster than conventional ros2_control, while maintaining continuous operation during safety-critical events. In a multi-stage manipulation task, the proposed framework reduced execution time by 3.5% and peak trajectory jerk by more than threefold. By eliminating runtime middleware overhead, controller transitions are implemented as lock-free pointer operations, enabling reflex-level responsiveness within an open-source robotics framework.

Comment
Submitted to IEEE, source code available at: https://github.com/RoboRef/franka_reflex_engine

Closest papers

Nearest neighbours by meaning across the whole index.

Keeping the Franka Emika Panda alive: a ROS 2 stack with a reliable position interface

cs.RO ·2026-08-20 ·Antonio Langella, Davide Risi, Vincenzo Petrone, Enrico Ferrentino, Pasquale Chiacchio
publishedcode/datahot direction similarity 0.71
Abstract · 12 pages, 10 figures

This paper presents an open-source software stack that restores ROS 2 support for the Franka Emika Panda robot while resolving the long-standing unreliability of its external position control interface. We first analyze the root causes of unstable position control and show that the observed vibrations and protective stops arise from the timing of the external control loop and sampling jitter, rather than from limitations of the robot itself. Building on this analysis, we introduce an asynchronous hardware interface that decouples real-time communication from the ROS 2 control loop, a rate-matching mechanism for slower command sources, and a position-domain reference generation strategy that produces reliable, smooth position commands. Experimental validation shows that the proposed architecture reliably tracks velocity references by reducing motion artifacts introduced by the official implementation, and the stack is validated across motion planning, compliance control, position-controlled manipulation, and haptic teleoperation on two independent Panda platforms. By restoring a modern, reliable, and open ROS 2 ecosystem for the Panda, this work lowers the barrier to developing safe, responsive, and reproducible human-robot collaboration applications that integrate planning, perception, interaction, and shared autonomy. Code and videos are available on our website at https://sites.google.com/unisa.it/fer-ros2.

0.53

RoboPace: Contact-Aware Time-Optimal Retiming for Action-Chunk Policies

cs.RO ·2026-10-07 ·Mimo Shirasaka, Takehiko Ohkawa, Takuya Okubo, Nicola Scianca, Tatsuya Matsushima +1 more
similarity 0.69
Abstract · Project: https://robopace.airoa.io/

Robot manipulation data collection has been shifting from teleoperation toward robot-free demonstrations, through interfaces such as the Universal Manipulation Interface (UMI) or directly from human hands. Vision-Language-Action (VLA) policies trained on such data inherit the demonstrator's timing. Yet human timing does not directly transfer to robots: compliant hands tolerate fast contact, whereas robots may overshoot due to actuator and tracking limitations; conversely, robots can move faster in free space. This motivates a unified approach that reconciles execution speed with contact safety. We present RoboPace, an online retiming layer that preserves the policy's geometric path while adapting its timing, respecting the target robot's kinematic and dynamic constraints. It adapts execution speed based on predicted contact, jointly accounting for contact-dependent speed limits and the robot's motion constraints. The method requires no policy retraining and operates in real time. Across three contact-rich tasks on a dual-arm robot, faster uniform execution and physical-limit-only retiming largely fail. RoboPace instead achieves higher overall success than slow uniform execution while completing four of five commands in approximately half the time, retaining the reliability of slow execution without its time cost.

0.51

ReflexArc: Bottom-Up Integration of Instantaneous Tactile Reflexes into Whole-Body Humanoid Control

cs.RO ·2026-11-03 ·Mingyu Wang, Si Li, Ziqing Chen, He Wang, Li Yi
code/data similarity 0.64
Abstract · 8 pages, 6 figures

Humanoid robots operating in cluttered environments must react to unexpected contacts before the first impact peak, which arrives within tens of milliseconds. Learned whole-body policies running at 50 Hz introduce a policy-cycle delay and may suppress a protective withdrawal as a tracking error. To address these challenges, we propose ARC (Ascending Reflex Control), a bottom-up framework that integrates instantaneous tactile reflexes with learned whole-body control. ARC consists of two components: an instantaneous reflex pathway and bottom-up reflex integration. The reflex pathway detects hazardous contacts from full-body tactile sensing, solves a whole-body withdrawal pose, and delivers it directly to the motors within 10 ms. Bottom-up reflex integration combines reflex-in-the-loop policy learning, reflex-transparent policy alignment, and reflex-informed policy adaptation to sustain the withdrawal, maintain balance, and complete longer-horizon recovery. We deploy ARC on a Unitree G1 and evaluate three categories of hazardous contact. Compared with an otherwise identical reflex delayed by 20 ms, ARC reduces the first force peak by 34.1% and reduces the contact impulse from 0.2632 N s to 0.1225 N s (a 2.15x ratio). We further demonstrate protected motion tracking, teleoperation, and vision-free obstacle traversal guided by foot tactile sensing. Project page: https://minusmodulo.github.io/reflexarc-website/

0.28

Body-Grounded Replanning for Physically Adaptive Manipulation

cs.RO ·2026-09-24 ·Namiko Saito, Hiroshi Kera
similarity 0.64
Abstract

Manipulation requires not only reasoning about the external environment, but also about the robot's physical condition. A strategy may remain geometrically feasible while becoming physically unsuitable due to increased joint load or limited mobility, yet internal physical state is typically used only for low-level control. We propose body-grounded high-level replanning, which uses internal physical state to adapt manipulation strategies during execution. Body-state events trigger strategy replanning, and an LLM interprets the underlying joint-level state, recent execution statistics, and execution history to select a context-dependent alternative, while leaving the task objective and low-level controller unchanged. We evaluate the framework on a reaching task under controlled load and asymmetric mobility constraints in simulation and on a real robot. Our experiments show that body-grounded replanning maintains high task success while reducing physical effort and enabling more efficient strategy adaptation. Additional contact-rich manipulation experiments demonstrate the applicability of the same replanning interface beyond reaching. These results show that internal physical state can inform not only low-level control, but also high-level decisions about how a manipulation task should be performed.

0.27

TacForcing: Streaming Action Generation with Execution-Time Tactile Feedback

cs.RO cs.LG ·2026-08-26 ·Jianbo Zhou, Boyuan Zhao, Yuzheng Zhang, Yiyang Chen, Wenxin Chen +7 more
similarity 0.62
Abstract · 15 pages, 9 figures, 2 tables. Revised text and expanded real-world experiments

Contact-rich manipulation requires adapting to contact states that can evolve substantially within an action horizon. However, chunk-based vision-language-action models predict complete action chunks from observations collected before execution, leaving tactile conditioning stale during execution. Existing tactile-reactive approaches typically rely on separate high-frequency controllers, which increase both architectural and training complexity. In this paper, we introduce TacForcing, a streaming action-generation framework incorporating execution-time tactile feedback. TacForcing replaces the standard action expert with a streaming expert that generates action blocks sequentially while preserving intermediate states of unfinished blocks. After each block is executed, the expert resumes generation from these states using newly acquired tactile feedback. To better align tactile conditioning with action execution, we further introduce Execution-Aware Tactile Attention (EATA), which restricts direct access to each tactile update to the next block scheduled for execution. Across six UniVTAC simulation tasks and six real-world contact-rich manipulation tasks on two robot platforms, TacForcing achieves average success rates of 65% in simulation and 66% in the real world, outperforming the strongest baselines by 6 and 15 percentage points, respectively.

0.38

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.62
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

Touch Where It Matters: Learning Local Tactile Policies for Fine-Grained Gripper Control

cs.RO ·2026-10-17 ·Mingyuan Ba, Yanan Zhou, James Zhao, Weiming Zhi
similarity 0.62
Abstract · 9 pages, 11 figures, 3 tables

Visual imitation policies can organise task motion, yet contact-rich object use demands gripper adjustments beyond coarse opening and closing. We study fine-grained gripper control as a local feedback problem within ongoing task execution. Our approach assigns tactile feedback a dedicated control role during contact-rich task stages. We introduce ContactPolicy, a learned local controller that takes over the gripper while a visual base policy continues to control the arm. ContactPolicy combines tactile and force histories with current robot state to jointly predict gripper increments and their modulation, updating the gripper target from each new observation. An Intent policy manages control handover between the visual base policy and ContactPolicy. Real-world experiments on container opening, object handling, and tool operation show improved task success over both the Visuomotor Policy and Tactile-Force Policy baselines. Execution analysis illustrates how the gripper adjusts contact within an ongoing task, including periods of target retention and fine-grained changes as interaction conditions evolve. Arm-state ablations and failure analysis further examine how execution context supports local regulation. These results support task-local tactile policies for fine-grained gripper control within visual manipulation.

0.16

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.62
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32