CS Paper Radar

Technical Report of Mobile Manipulator Robot for Industrial Environments

Aria Dadnavi, Matin Jamshidi, Kian Khatibi, Shahriar Karimi Makhsous, Saina Najafi Shabestari, Seyed Sobhan Hosseini Hajibekandeh, Zahra Mahaam, Reyhane Mohasseli, Ghazal Ghoreishi, Amirhossein Gholizadeh Behbahani, Mohammad Hossein Moaiyeri

cs.RO cs.CVeess.SY ·submitted 2026-11-17 14:34 UTC · v1

Abstract

This paper presents the design and implementation of Auriga Robotics' mobile manipulator robot, developed at the Robotics and Intelligent Automation Laboratory, Department of Electrical Engineering, Shahid Beheshti University. Hereafter, this platform is referred to as the @Work Robot. The robot targets industrial tasks, with an emphasis on improving efficiency in repetitive or hazardous work environments. It uses a 4-wheel Mecanum drive for omnidirectional movement and a 5-degree-of-freedom manipulator arm with a 3D-printed gripper for object handling and navigation. The electronics consist of custom PCB boards built around ESP32 microcontrollers, together with an NVIDIA Jetson Orin NX that handles high-level processing and real-time system control. On the software side, Hector SLAM provides mapping and localization, A* handles path planning, and YOLO performs real-time object detection. These modules draw on fused sensor data to deliver robust navigation and reliable collision avoidance. Overall, the system shows effective hardware-software integration, with consistent performance in autonomous navigation, object handling, and task execution in industrial-like settings.

Comment
25 pages, 22 figures, 4 tables. Technical report of Team Auriga's 2025 mobile manipulator (@Work) platform (Robotics and Intelligent Automation Laboratory, Shahid Beheshti University)

Closest papers

Nearest neighbours by meaning across the whole index.

Technical Report of Auriga's 1:10 Scale Autonomous Vehicle Robot

cs.RO cs.CVeess.SY ·2026-11-13 ·Marya Sabouri Dodaran, Ali Taheri Garakani, Mandana Shabanzadeh Nasrollah-Abadi, Yousef Ashrafi, Mohammad Mahdi Azimi +6 more
hot direction similarity 0.70
Abstract · 62 pages, 32 figures, 11 tables, 1 algorithm. Technical report of Team Auriga's 2025 1:10 scale autonomous vehicle platform (Robotics and In…

This report presents the design and implementation of Auriga Robotics' 1:10 scale autonomous vehicle, developed at Shahid Beheshti University's Robotics and Intelligent Automation Laboratory. The platform integrates a custom mechanical chassis, a distributed embedded system based on ESP32 microcontrollers, and a Jetson Orin NX module for high-level perception and control. The embedded layer manages sensor interfacing, real-time data acquisition, and actuator control, while the Jetson handles environment perception through deep-learning--based lane, sign, and traffic light detection, as well as decision-making and trajectory control. System communication is achieved via structured UART links, ensuring synchronized operation between perception and control subsystems. The vehicle's software stack incorporates ROS, modular firmware design, and multiple control algorithms---Stanley, PID, and Pure Pursuit---to achieve stable autonomous navigation in structured driving scenarios. The overall system demonstrates robust performance and reliability in urban-like environments, serving as a modular research platform for future autonomous driving studies.

0.33

ALFRED: Requirement-driven development of an open-source mobile manipulator for long-term plant monitoring

cs.RO cs.ARcs.CV ·2026-10-01 ·Ciarán Miceal Johnson, Christopher Quail, Garry Ellard, Alistair McConnell, Steve Tonneau +1 more
code/data similarity 0.62
Abstract · 36 pages, 19 figures

Tracking seasonal change in crops and forests requires observing the same plants repeatedly. Ground robots can do this at close range, and a manipulator gives their sensors more viewpoints. Yet the robots behind long-term field datasets are rarely released with their design files, and how a robot's own structure limits arm reach and occludes its sensors is seldom compared between builds. We present ALFRED, an open-source mobile manipulator built from commercially available components. It carries a six-degree-of-freedom arm, LiDAR, RGB-D cameras, RTK GNSS and an IMU on an Ackermann-steered base, all mounted on a reconfigurable aluminium strut frame, and runs containerised ROS software. It was developed through four builds against six requirements for repeated outdoor deployment: durability, modularity, repairability, sensing reach, endurance and reproducibility. Model-based analysis of the last three builds shows the usable share of the arm's reachable poses rising from 34.0% to 60.0% and then 66.1%, and ray casting shows that only the final build keeps the frame-mounted LiDAR's horizontal view clear both forwards and backwards. ALFRED completed a year of monthly forest surveys (528 traversals) without missing a scheduled collection. This was despite battery degradation, reconfiguration for another researcher's study, and the parallel development of ALFRED 2.0 for autonomous crop-row operation, with each switch between builds taking about six hours. The deployment also showed that mechanical modularity is only as dependable as the robot description that tracks it.

0.36

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.61
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

Reproducible Vision-Guided 6-DoF Robotic Manipulator with a Mixed Stepper-Driver Architecture and Browser-Native Control

cs.RO cs.CVeess.SY ·2026-08-24 ·Lasan Perera, Deneth Priyadarshana, Dulana Pitiwaduge, Isitha Dinujaya, Mokshan Colambage
code/data similarity 0.61
Abstract · 13 pages, 16 figures, 7 tables. Design files and firmware: https://github.com/Lasan-Perera/6-dof-arm-neuralnexus

We present the NeuralNexus Arm, an open, low-cost 6-DOF robotic manipulator built by an undergraduate engineering team, together with the design decisions and debugging experience needed to reproduce it. The arm is driven by a single STM32H743 microcontroller on a custom printed circuit board (PCB) and combines two stepper-driver strategies on one controller: push-pull 3.3 V step/direction outputs for onboard TMC2209 drivers on the three wrist joints, and open-drain outputs for external CL57T and DM542 drivers on the three high-torque proximal joints. We describe the mechanical design, mixed-driver electronics, interrupt-driven firmware, a MATLAB/Simscape-based inverse-kinematics pipeline, a browser-native control interface using the Web Serial API, and a lightweight vision pipeline for object localisation and autonomous pick-and-place tasks. We also document non-obvious hardware and firmware failure modes encountered during the transition from a development board to the custom PCB as reproducibility guidance. All design files and firmware are released openly. The platform actuates all six axes under coordinated control at a 2 kHz update rate and executes both manual and pre-recorded motions from the browser interface.

0.35

ROS2SmolVLA: Enabling Small Vision-Language-Action Models for Integration into Industrial-Grade Lightweight Robots

cs.RO ·2026-08-24 ·Nils Mandischer, Noah Böckmann, Ludwig Holl, Lars Mikelsons
publishedcode/data similarity 0.60
Abstract · Accepted at 8th International Conference on Industry of the Future and Smart Manufacturing, Padua & Venice, 2026

Industrial demand changes the paradigms of production. Due to smaller batch sizes and more variations in products, companies face a growing challenge to adopt more adaptive production systems. In particular, robot-based automation is usually static and fails to respond to constantly changing processes. Vision-Language-Action (VLA) Models are a promising opportunity to mitigate this challenge by generating robot actions based on the observed system state. However, current research either focuses on large models that cannot be computed on premise, creating compliance and security challenges, or use lab-grade robot hardware that obscures exploitation in real industrial settings. In this work, we adapt Hugging Face's SmolVLA for Universal Robots lightweight robots. Further, we release the open-source repository ROS2SmolVLA that implements an interface for ROS 2 to SmolVLA, and makes it applicable for industrial-grade hardware. By this, we allow a lenient adoption into lab and industrial environments. We validate the functionality of SmolVLA for a Universal Robots UR10e using a pick-and-place task and give implementation guidelines. Our findings support that SmolVLA is a well-suited option for small-sized tasks that need to be computed on premise.

0.56

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.59
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.59
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

SPARC: RoboCup Standard Platform for Autonomous Rescue Competition with Initial Datasets, Software, and Simulation Environments

cs.RO ·2026-11-11 ·Yuezhong Wang, Bichi Zhang, Zhongli Yin, Pingcong Li, Raimund Edlinger +1 more
benchmarkcode/data similarity 0.59
Abstract · IEEE SSRR 2026

The RoboCup Standard Platform for Autonomous Rescue Competition (SPARC) is a new competition under development of the RoboCup Rescue Robot League that uses the Unitree A2-W as a common robot platform. SPARC aims to make research on artificial intelligence for autonomous rescue robots accessible to a broader research community, including groups without expertise in developing and maintaining custom robot hardware. By providing a capable standard platform and established benchmark environments, researchers can focus on autonomous navigation, perception, manipulation, and embodied AI for challenging disaster-response scenarios. This paper introduces the SPARC competition, its benchmark environment, and the Unitree A2-W standard platform. Furthermore, we present the first open SPARC datasets collected during the IEEE ICRA 2026 Legged Robot Challenges and RoboCup Rescue 2026, release an open-source software stack for autonomous navigation, and provide initial simulation assets representing RoboCup Rescue test environments. Together, these resources aim to lower the barrier to entry for autonomous rescue robotics and facilitate reproducible research and collaborative development on a common hardware platform.

0.32