CS Paper Radar

Technical Report of Auriga's 1:10 Scale Autonomous Vehicle Robot

Marya Sabouri Dodaran, Ali Taheri Garakani, Mandana Shabanzadeh Nasrollah-Abadi, Yousef Ashrafi, Mohammad Mahdi Azimi, Erfan Nekouei Ghahfarokhi, Amirhossein Kheiri Holighi, Seyyed Sobhan Hosseini Hajibakandeh, Matin Jamshidi, Amirhossein Gholizadeh Behbahani, Mohammad Hossein Moaiyeri

cs.RO cs.CVeess.SY ·submitted 2026-11-13 19:07 UTC · v1
hot direction

Abstract

This report presents the design and implementation of Auriga Robotics' 1:10 scale autonomous vehicle, developed at Shahid Beheshti University's Robotics and Intelligent Automation Laboratory. The platform integrates a custom mechanical chassis, a distributed embedded system based on ESP32 microcontrollers, and a Jetson Orin NX module for high-level perception and control. The embedded layer manages sensor interfacing, real-time data acquisition, and actuator control, while the Jetson handles environment perception through deep-learning--based lane, sign, and traffic light detection, as well as decision-making and trajectory control. System communication is achieved via structured UART links, ensuring synchronized operation between perception and control subsystems. The vehicle's software stack incorporates ROS, modular firmware design, and multiple control algorithms---Stanley, PID, and Pure Pursuit---to achieve stable autonomous navigation in structured driving scenarios. The overall system demonstrates robust performance and reliability in urban-like environments, serving as a modular research platform for future autonomous driving studies.

Comment
62 pages, 32 figures, 11 tables, 1 algorithm. Technical report of Team Auriga's 2025 1:10 scale autonomous vehicle platform (Robotics and Intelligent Automation Laboratory, Shahid Beheshti University)

Closest papers

Nearest neighbours by meaning across the whole index.

Technical Report of Mobile Manipulator Robot for Industrial Environments

cs.RO cs.CVeess.SY ·2026-11-17 ·Aria Dadnavi, Matin Jamshidi, Kian Khatibi, Shahriar Karimi Makhsous, Saina Najafi Shabestari +6 more
similarity 0.70
Abstract · 25 pages, 22 figures, 4 tables. Technical report of Team Auriga's 2025 mobile manipulator (@Work) platform (Robotics and Intelligent Automat…

This paper presents the design and implementation of Auriga Robotics' mobile manipulator robot, developed at the Robotics and Intelligent Automation Laboratory, Department of Electrical Engineering, Shahid Beheshti University. Hereafter, this platform is referred to as the @Work Robot. The robot targets industrial tasks, with an emphasis on improving efficiency in repetitive or hazardous work environments. It uses a 4-wheel Mecanum drive for omnidirectional movement and a 5-degree-of-freedom manipulator arm with a 3D-printed gripper for object handling and navigation. The electronics consist of custom PCB boards built around ESP32 microcontrollers, together with an NVIDIA Jetson Orin NX that handles high-level processing and real-time system control. On the software side, Hector SLAM provides mapping and localization, A* handles path planning, and YOLO performs real-time object detection. These modules draw on fused sensor data to deliver robust navigation and reliable collision avoidance. Overall, the system shows effective hardware-software integration, with consistent performance in autonomous navigation, object handling, and task execution in industrial-like settings.

0.22

AlphaTruck: A Platform for High-Speed Off-Road Autonomy on Unstructured Terrain

cs.RO ·2026-11-15 ·Rwik Rana, Adam J. Thorpe, Jesse Quattrociocchi, William Ward, Goktug Poyrazoglu +9 more
similarity 0.68
Abstract

Progress in autonomous navigation in off-road environments requires not only advances in algorithms, but also robust and capable physical platforms suited to both development and deployment. Today, off-road autonomy is typically developed and tested at one of two extremes of vehicle scale, each with different drawbacks. Full-size vehicles are capable but expensive, require large logistic infrastructure for deployment and maintenance, and expensive when pushed beyond their limits. RC-scale vehicles are small and inexpensive, but limited in the terrain they can traverse and the payload that they can carry, which includes their sensors and compute. We present the AlphaTruck platform, which leverages recent advances in compact sensing and compute to integrate multimodal sensing, embedded CPU-GPU compute, and an onboard autonomy stack for high-speed, off-road navigation, all integrated into a large-scale, 1/5th RC vehicle chassis. AlphaTruck is designed as both a research testbed and a field-deployable platform for commercial and defense missions such as survey, search and rescue, and agriculture, with the capacity to carry task-specific payloads. At 1/5 scale, the autonomy stack, sensors, and batteries all compete for the same mass, power, and cooling budget, so the platform must balance five needs: mobility over rough terrain, rich sensing, onboard computation, payload capacity to carry the autonomy stack while leaving room for task-specific equipment, and practical operation and repair. Thus, AlphaTruck navigates off-road environments autonomously at 6-10 m/s using only onboard sensing and compute.

0.48

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.65
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

A Low-Cost, Open Platform for End-to-End Autonomous Driving on a Miniature Ackermann Vehicle

cs.LG cs.AIcs.RO ·2026-09-03 ·Gustavo Claudio Karl Couto, Eric Aislan Antonelo, Gabriel George Zipperer
similarity 0.62
Abstract

This paper presents a low-cost, open experimental platform for research in end-to-end autonomous driving with miniature Ackermann vehicles. The platform combines a physical vehicle, a printed urban track, data collection tools, trajectory registration, and a Webots digital twin, enabling controlled experiments that connect simulation-based autonomous-driving methods to real-world execution. As a first baseline, we implement command-conditioned behavior cloning, in which a neural policy receives an on-board camera image and a high-level navigation command and outputs steering and speed. The system is evaluated both on the physical vehicle and in simulation. In real closed-loop experiments, the learned policy follows lanes and executes commanded turns, reaching a mean cross-track error of 6.1 cm with respect to the reference route, close to the 4.7 cm observed in human demonstrations. In the digital twin, camera field of view has a strong effect on performance, reducing the mean cross-track error from 35.6 to 3.3 cm when widened from 58 to 120 degrees. Using the digital twin to generate synthetic driving data and a learned sim-to-real image translator to reduce the appearance gap, we further show that a higher-capacity policy trained on this synthetic data combined with real demonstrations is the only configuration that completes all four track routes in closed loop, whereas the compact baseline and the same network trained on real data alone complete fewer. These results establish the open platform as a practical testbed for sim-to-real studies and provide an initial command-conditioned imitation-learning baseline; we release it to support reproducible research.

0.30

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.61
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

Cybflight: An Embedded Rust Autopilot for Aerial Robotics Research

cs.RO ·2026-09-25 ·Yifan Lin, Chao Qin, H S Helson Go, Hugh H. -T. Liu
code/data similarity 0.61
Abstract

Bringing an aerial robotics method from simulation to flight should not require rebuilding a mature autopilot or adding a companion computer. Cybflight is an open-source embedded Rust research autopilot whose typed, replaceable interfaces connect hardware access, perception, state estimation, trajectory planning, and control. This modular development and compile-time optimization workflow is demonstrated with replaceable Rust implementations of model predictive contour-tracking control (MPCTC) and incremental nonlinear dynamic inversion (INDI) running on one STM32H743 without a companion computer. Using this configuration, the vehicle reaches 12.38 m/s during indoor flight, while an outdoor flight using global navigation satellite system (GNSS) position updates reaches 31.4 m/s. These flights show that running demanding estimation and nonlinear control entirely on a flight-controller microcontroller need not come at the expense of a modular autopilot structure.

0.65

AUTOPILOT An Advanced Perception, Localization and Path Planning Techniques for Autonomous Vehicles Using YOLOv7 and MiDaS

cs.RO cs.LG ·2026-10-05 ·Harshkumar Devmurari, Gautham Kuckian, Prajjwal Vishwakarma
published similarity 0.60
Abstract · Published in the 2023 International Conference on Advanced Computing Technologies and Applications (ICACTA), IEEE

Self driving vehicles have emerged as a reliable technology that has the capability to transform transportation and mobility. The development of self driving cars requires significant advances in a number of areas, including perception, localization, decision making, and control. This research paper is based on the project implementation of the combination of object detection using YOLO (You Only Look Once), depth sensing using MiDaS for the localization and perception of obstacles, perspective transform, and decision making for path planning in self driving cars. The contemporary state of the technology for object detection, depth sensing, localization, and path planning evaluates the performance of the combined system through simulations and experiments. The results show that the combination of YOLO and MiDaS provides a new robust system for object detection and depth sensing. This research paper contributes to the advancement of self driving car technology and provides new and innovative approaches to the perception and localization of obstacles in the environment. Keywords: YOLO, MiDaS, perception, localization, decision making

0.57

Autoware in Construction: Gap Analysis and LiDAR Perception Toward Off-Road Autonomous Driving

cs.RO ·2026-10-03 ·Yu Otsuki, Teja Emmey, Sena Matsushita, Akiro Harada, Takeshi Miura
publishedcode/data similarity 0.60
Abstract · 2026 IROS 5th Workshop on Future of Construction, 4 pages, 5 figures

Autoware is an open-source autonomous driving software platform widely adopted by researchers and industry developers. Originally developed primarily for public-road applications, including passenger vehicles, taxis, and buses, Autoware is increasingly being extended to off-road environments such as construction and agricultural sites. Construction sites, however, differ fundamentally from public roads and challenge many assumptions underlying conventional autonomous driving systems. They are characterized by unstructured terrain, airborne dust, continuously evolving site conditions, and construction-specific objects. This paper presents lessons learned from ongoing efforts to extend an Autoware-based autonomous driving system to large dump trucks operating at construction sites. We identify gaps between public-road and off-road construction applications across the sensing, mapping, localization, perception, planning, and control modules of the Autoware stack. We then discuss potential solutions for addressing these gaps, with particular emphasis on ongoing LiDAR-based perception pipeline development and findings from field testing. Finally, we propose a roadmap toward end-to-end autonomous driving for construction vehicles.

0.37