CS Paper Radar

Cybflight: An Embedded Rust Autopilot for Aerial Robotics Research

Yifan Lin, Chao Qin, H S Helson Go, Hugh H. -T. Liu

cs.RO ·submitted 2026-09-25 13:10 UTC · v1
code/data

Abstract

Bringing an aerial robotics method from simulation to flight should not require rebuilding a mature autopilot or adding a companion computer. Cybflight is an open-source embedded Rust research autopilot whose typed, replaceable interfaces connect hardware access, perception, state estimation, trajectory planning, and control. This modular development and compile-time optimization workflow is demonstrated with replaceable Rust implementations of model predictive contour-tracking control (MPCTC) and incremental nonlinear dynamic inversion (INDI) running on one STM32H743 without a companion computer. Using this configuration, the vehicle reaches 12.38 m/s during indoor flight, while an outdoor flight using global navigation satellite system (GNSS) position updates reaches 31.4 m/s. These flights show that running demanding estimation and nonlinear control entirely on a flight-controller microcontroller need not come at the expense of a modular autopilot structure.

Closest papers

Nearest neighbours by meaning across the whole index.

Aero-VPA: Few-Step Flow-Matching Control over Non-Reconstructive JEPA Latents for Agile Flight on Edge Hardware

cs.LO cs.LGcs.RO ·2026-11-03 ·Yeonseok Lee
benchmarkcode/data similarity 0.63
Abstract · 38 pages, 3 figures, 22 tables. Simulation study (PX4 SITL + Gazebo Harmonic). Version 2 of a preprint first posted on Zenodo (doi:10.5281/z…

Vision-Language-Action (VLA) models generalize across tasks, but their autoregressive decoders need sequential forward passes in proportion to the action horizon, each bounded below on embedded aerial platforms by streaming billions of parameters from memory. We present Aero-VPA, a lightweight Vision-Predictor-Action architecture for 3D navigation on edge hardware. A compact RGB-D Vision Transformer and a five-head ensemble predictor, trained without pixel reconstruction, forecast the next latent state; a Conditional Flow Matching solver generates a velocity and yaw-rate chunk in two Euler steps, so each decision takes five sequential network evaluations; and the ensemble dispersion drives an uncertainty fallback. Version 1 specified the architecture, deployment and protocol without results. This version reports the first closed-loop evaluation: PX4 software-in-the-loop simulation of quadrotor missions in procedurally generated forests. Behaviour cloning failed on all 60 missions despite open-loop errors of 0.02-0.04 m/s: the policy copies its last command, a copycat form of causal confusion. DAgger with a privileged, safety-gated supervisor gave the first successes but plateaued at 11.1-21.1% across six checkpoints. A map-free runtime shield with a 15 s depth memory, barrier constraints, a cap on motion outside the 73-degree field of view and backoff along the flown path raised the first DAgger policy's success on 180 paired missions from 21.1% to 52.2% (95% CI [45.0, 59.4]; exact McNemar p = 1.2 x 10^-10) and cut its crashes from 72.2% to 22.2%, while timeouts rose from 2.8% to 23.3%. All six checkpoints gained 30.0-34.4 percentage points, at mean speeds of 1.16-1.36 m/s. The code (https://github.com/ylee-sling/Aero-VPA), the trained policy (72.6 MB, https://huggingface.co/ylee-sling/aero-vpa) and the full benchmark dataset are public.

0.34

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.63
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

A Field-Deployable GNSS-based Navigation Stack for Outdoor Mobile Robots

cs.RO eess.SY ·2026-09-24 ·Yiyuan Lin, Cole Regnier, Yu Jiang
code/data similarity 0.63
Abstract

Outdoor robots require more than an accurate receiver and a path-tracking law: the navigation system must preserve geometric consistency from geographic waypoints to actuator commands, expose measurement validity and timing, and respond to invalid or stale state information. This work presents a ROS~2 navigation stack with interchangeable single-GNSS--IMU and dual-antenna-GNSS localization front ends. Both provide a common local East--North--Up state interface for pure pursuit, virtual-point cross-track PID, finite-horizon nonlinear model predictive control (NMPC), and a segment-dependent hybrid dispatcher. The architecture specifies coordinate conventions, datum initialization, asynchronous state construction, waypoint geometry, controller equations, quality gates, command arbitration, and watchdog behavior. Independent physical field runs collected during 2025 and 2026 grape-vineyard deployments support a balanced evaluation of 800 runs, with 100 runs for each of eight controller--localization combinations on an approximately 199.6-m route. The row-hybrid mode yields the lowest run-averaged post-acquisition mean absolute cross-track error (MAE) in the evaluated dataset: 0.00952~m with single GNSS+IMU and 0.00846~m with dual GNSS. These findings characterize deviations of the recorded positions from the reference route under the evaluated conditions. The open-source navigation software and deployment instructions are available in the https://github.com/YiyuanLinXX/PPBv2/tree/main/PPBv2_Navigation.

0.33

FALCON-S: Fixed-wing ground-effect Aerodynamics Simulator and Flight Control Learning Suite

cs.RO cs.LGeess.SY ·2026-09-05 ·Matteo El Hariry, Pedro Lima, Andrej Orsula, Matthieu Geist, Miguel Olivares-Mendez
similarity 0.62
Abstract · Index Terms: Robot Learning, Flight Control, Reinforcement Learning, Autonomous Navigation, Control and Dynamics, Modeling and Simulation, W…

We present a modular, high-fidelity simulation framework for the development and benchmarking of flight control strategies in fixed-wing aerial robots operating near the ground. Unlike existing simulators that rely on simplified or hover-oriented dynamics, our framework models full 6DoF rigid-body physics, semi-empirical ground-effect aerodynamics, actuator dynamics, sensor noise, and environmental disturbances. This physical realism, combined with modular component design, enables systematic analysis of low-altitude flight behavior under realistic conditions. The simulator supports both CPU and GPU backends via Torch and NVIDIA Warp, enabling high-throughput parallel execution suitable for large-scale reinforcement learning training and optimal control rollouts. A unified interface accommodates a range of controllers (both RL and optical control algorithms) across tasks such as altitude regulation and trajectory tracking. Cross-validation with X-Plane and JSBSim is also supported to facilitate engineering integration and visual fidelity.

0.18

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.61
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

Technical Report of Auriga's 1:10 Scale Autonomous Vehicle Robot

cs.RO cs.CVeess.SY ·2026-11-13 ·Marya Sabouri Dodaran, Ali Taheri Garakani, Mandana Shabanzadeh Nasrollah-Abadi, Yousef Ashrafi, Mohammad Mahdi Azimi +6 more
hot direction similarity 0.61
Abstract · 62 pages, 32 figures, 11 tables, 1 algorithm. Technical report of Team Auriga's 2025 1:10 scale autonomous vehicle platform (Robotics and In…

This report presents the design and implementation of Auriga Robotics' 1:10 scale autonomous vehicle, developed at Shahid Beheshti University's Robotics and Intelligent Automation Laboratory. The platform integrates a custom mechanical chassis, a distributed embedded system based on ESP32 microcontrollers, and a Jetson Orin NX module for high-level perception and control. The embedded layer manages sensor interfacing, real-time data acquisition, and actuator control, while the Jetson handles environment perception through deep-learning--based lane, sign, and traffic light detection, as well as decision-making and trajectory control. System communication is achieved via structured UART links, ensuring synchronized operation between perception and control subsystems. The vehicle's software stack incorporates ROS, modular firmware design, and multiple control algorithms---Stanley, PID, and Pure Pursuit---to achieve stable autonomous navigation in structured driving scenarios. The overall system demonstrates robust performance and reliability in urban-like environments, serving as a modular research platform for future autonomous driving studies.

0.33

Dynamic System Emulation: Fixed Wing Dynamics on a Multicopter

eess.SY cs.RO ·2026-09-06 ·Abdelhakim Amer, Andriy Sarabakha
similarity 0.60
Abstract · 7 pages, 6 figures

This work presents a control framework that enables a multicopter equipped with a two-axis gimbal to emulate the flight dynamics of a fixed-wing aircraft. The goal is to provide an operationally simple platform for training and simulation that avoids the aerodynamic constraints of fixed-wing vehicles, such as minimum airspeed and nonholonomic constraints. A state-input mapping between the two platforms is derived using dynamic feedback linearization. The framework is evaluated on representative fixed-wing manoeuvres. Results show high-fidelity emulation under nominal conditions. While evaluations are conducted in simulation, the approach establishes a practical path toward hardware deployment for pilot training, autonomy research, and controller benchmarking.

0.27

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.60
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26