CS Paper Radar

A Field-Deployable GNSS-based Navigation Stack for Outdoor Mobile Robots

Yiyuan Lin, Cole Regnier, Yu Jiang

cs.RO eess.SY ·submitted 2026-09-24 02:35 UTC · v1
code/data

Abstract

Outdoor robots require more than an accurate receiver and a path-tracking law: the navigation system must preserve geometric consistency from geographic waypoints to actuator commands, expose measurement validity and timing, and respond to invalid or stale state information. This work presents a ROS~2 navigation stack with interchangeable single-GNSS--IMU and dual-antenna-GNSS localization front ends. Both provide a common local East--North--Up state interface for pure pursuit, virtual-point cross-track PID, finite-horizon nonlinear model predictive control (NMPC), and a segment-dependent hybrid dispatcher. The architecture specifies coordinate conventions, datum initialization, asynchronous state construction, waypoint geometry, controller equations, quality gates, command arbitration, and watchdog behavior. Independent physical field runs collected during 2025 and 2026 grape-vineyard deployments support a balanced evaluation of 800 runs, with 100 runs for each of eight controller--localization combinations on an approximately 199.6-m route. The row-hybrid mode yields the lowest run-averaged post-acquisition mean absolute cross-track error (MAE) in the evaluated dataset: 0.00952~m with single GNSS+IMU and 0.00846~m with dual GNSS. These findings characterize deviations of the recorded positions from the reference route under the evaluated conditions. The open-source navigation software and deployment instructions are available in the https://github.com/YiyuanLinXX/PPBv2/tree/main/PPBv2_Navigation.

Closest papers

Nearest neighbours by meaning across the whole index.

Obstacle-Aware Autonomous Coverage and Navigation for Outdoor Robots

cs.RO ·2026-09-01 ·Leonardo Gargani, Matteo Frosi, Matteo Matteucci
similarity 0.65
Abstract

Long-duration outdoor coverage with autonomous platforms remains challenging beyond classical planning: deployments face localization drift in open spaces, obstacles in cluttered sites, controller feasibility in turn-heavy maneuvers, and persistent autonomy with energy management. We propose a unified ROS 2 architecture for single-robot outdoor coverage: a dual-antenna RTK-GNSS fused in an EKF keeps both position and heading accurate across long missions; three controller-aware refinements extend a mature coverage planner; a Nav2-based behavior-tree mission executive coordinates multi-goal execution, layered recovery, cost-aware goal management, and autonomous docking for return-to-charge. In real-world trials across five outdoor areas with varying geometries and obstacle densities, the robot completed every coverage route, sweeping 93.1% to 96.1% of the planned coverage area.

0.29

Cybflight: An Embedded Rust Autopilot for Aerial Robotics Research

cs.RO ·2026-09-25 ·Yifan Lin, Chao Qin, H S Helson Go, Hugh H. -T. Liu
code/data similarity 0.63
Abstract

Bringing an aerial robotics method from simulation to flight should not require rebuilding a mature autopilot or adding a companion computer. Cybflight is an open-source embedded Rust research autopilot whose typed, replaceable interfaces connect hardware access, perception, state estimation, trajectory planning, and control. This modular development and compile-time optimization workflow is demonstrated with replaceable Rust implementations of model predictive contour-tracking control (MPCTC) and incremental nonlinear dynamic inversion (INDI) running on one STM32H743 without a companion computer. Using this configuration, the vehicle reaches 12.38 m/s during indoor flight, while an outdoor flight using global navigation satellite system (GNSS) position updates reaches 31.4 m/s. These flights show that running demanding estimation and nonlinear control entirely on a flight-controller microcontroller need not come at the expense of a modular autopilot structure.

0.64

Planner-Controller Interaction for Ackermann Navigation: A Matched Simulation and Hardware Benchmark

cs.RO ·2026-11-18 ·Moaiz Saeed, Marah Saleh, Mounis Shawgi, Mohamed Al Musleh
benchmarkcode/data similarity 0.61
Abstract · 32 pages, 8 figures, 8 tables. Code: https://github.com/HWUD-AIMBeyonD/qcar and https://github.com/HWUD-AIMBeyonD/QCarSim

Global planners and path-tracking controllers are often evaluated independently, although their interaction determines how a vehicle follows a planned path. Whether simulation accurately predicts the performance of specific planner-controller combinations on Ackermann-steered hardware remains uncertain. This study evaluated three geometric controllers (Regulated Pure Pursuit, Stanley, and Vector Pursuit) paired with two global planners (Hybrid A* and NavFn) on a 1/10-scale Quanser QCar and in a matched Gazebo simulation. Both environments used shared custom planning and control algorithms, matched route geometry and goals, ground-truth pose references, and a common evaluation pipeline. Five runs per configuration and environment yielded 60 benchmark runs. Controller rankings for tracking accuracy and command smoothness transferred consistently between environments, with Spearman correlations of 0.77-0.94. However, planner-dependent effects showed substantially weaker agreement. In simulation, planner selection changed the root-mean-square (RMS) angular acceleration of the commanded velocities by no more than 0.030 rad/s^2, whereas Hybrid A* increased it by 0.141-0.843 rad/s^2 on hardware, depending on the controller. These differences coincided with planner-dependent achieved speeds that the simulation's idealised longitudinal response did not reproduce. Mean controller computation times remained below 0.5 ms on the Jetson TX2. The findings demonstrate that agreement in controller rankings does not guarantee accurate prediction of planner-dependent performance for specific controller pairings on hardware, highlighting the importance of physical validation.

0.46

JEPTERA: A Platform Agnostic JEPA-Assisted Model Predictive Planner for Urban UAV Navigation

cs.RO ·2026-11-16 ·Gibran Fathoni Belva, Mansur Arief, Ahmad Alfan Alfian Irfan
similarity 0.61
Abstract · 6 pages, 3 figures. Submitted to conference

Urban navigation for Unmanned Aerial Vehicles (UAVs) requires planning that accounts for environmental geometry, vehicle dynamics, and moving obstacles. This paper presents JEPTERA, a navigation architecture that integrates a Joint-Embedding Predictive Architecture (JEPA), Model Predictive Control (MPC), PID control, and a safety layer. JEPA predicts the UAV's motion response to candidate commands for MPC action selection, while the safety layer checks trajectories against occupied space and predicted obstacle motion. Simulator adapters and platform-specific YAML configurations separate the planning core from simulator interfaces. An ablation study evaluated six configurations across three gym scenarios, totaling 180 runs. The complete architecture achieved the highest aggregate success rate, completing 28 of 30 runs. Additional tests completed one route across three city maps without collisions. Separate integration tests demonstrated operation in Gazebo/ROS 2, MuJoCo, and CARLA without modifying the core planning logic. These results support the feasibility of the integrated architecture for simulated urban UAV navigation and its portability across simulator interfaces.

0.22

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.59
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26

World-Model-Grounded LLM Planning for AUV and ASV Navigation Near Offshore Wind Farms

cs.RO ·2026-08-20 ·Markus Buchholz, Ignacio Carlucho, Yvan R. Petillot
publishedbenchmark similarity 0.59
Abstract · This work has been accepted to the IEEE IROS 2026 AQ2UASIM workshop

Large language models can turn a natural-language mission into a sequence of robot actions, but they do not have a sense of physics: they cannot judge how long a command should run, or whether it will make the robot drift into an obstacle. We proposed the use of a world model to expand the capabilities of Large Language model-based planners. Our method has three components: a physics-grounded neural world model, a three-phase gradient-based trajectory optimizer, and a Model Predictive Controller (MPC)-style closed-loop replanner with a trust-region guard. The language model decides what to do, and the world model decides how long, whether that means driving eight thrusters through 6 DOF or two differential thrusters through 3 DOF. We evaluate two marine vehicle classes operating near offshore wind infrastructure: a 6-DOF Autonomous Underwater Vehicle (AUV) and a 3-DOF differential-drive Autonomous Surface Vehicle (ASV). In five benchmark missions per platform, both vehicles reach every goal with zero predicted collisions, and both transfer to GazeboSim under ocean current, waves, and thruster dynamics, remaining collision-free and cutting GazeboSim goal-distance error versus the ungrounded baseline by 70-82% (ASV) and roughly 93% (AUV), after a residual fine-tuning pass that separately reduces surrogate rollout Root Mean Square Error (RMSE) by 60% (AUV) and 69% (ASV). For the ASV we further demonstrate a Vision language model (VLM)-assisted semantic-mapping pipeline that extracts obstacles and environmental context from satellite imagery, nautical charts, and forecast Application Programming Interface (API) instead of onboard sensors, reaching 96% navigability accuracy as a drop-in replacement for hand-specified obstacle geometry.

0.19

Demo: Closed-Loop Sionna-Isaac Sim Co-Simulation Framework for Wireless-Aware Robot Navigation over ROS 2

cs.NI cs.RO ·2026-10-06 ·Yi Shen Lim, Seungeun Oh, Jihong Park
published similarity 0.58
Abstract · 2 pages, 2 figures. Accepted as a Demo paper at ACM MobiHoc 2026. Demo video: https://youtu.be/_TE7tGWxK6A

A robot that offloads its control loop to the network carries the receiver with it, so link quality is decided by where it goes. Simulating this requires both a physics engine and a site-specific propagation model at once; to our knowledge no simulator natively unifies both, with existing couplings of the two limited to offline analyses. We demonstrate a real-time co-simulation framework coupling NVIDIA Isaac Sim and NVIDIA Sionna over ROS 2 that closes the perception-action-communication (PAC) loop between them. Sionna ray-traces the base-station-to-robot channel over the exact geometry Isaac Sim simulates on, rather than modeling it stochastically, and feeds channel states back into the control loop in real time. Ray-traced on GPU, the coverage map is refreshed in ~16ms (~60 Hz), fast enough for real-time control. To showcase the framework's utility, we implement a wireless-aware navigation application in an OpenStreetMap(OSM)-derived SUTD campus twin with two Nova Carter robots: the closed-loop planner eliminates communication outage at only +7.4% traversal time over the shortest-path baseline (which spends 7.9 s of its 81.2 s run disconnected).

0.48

An Adaptive Control Architecture for Slope and Terrain Compensation in Autonomous Navigation in Mediterranean Greenhouses

cs.RO ·2026-09-02 ·Fernando Cañadas-Aránega, Dirk Wollherr, José L. Guzmán, José C. Moreno, José L. Blanco-Claraco
similarity 0.58
Abstract

The ability to move stably over terrain with varying slopes and textures is essential for mobile agricultural robots operating in complex and dynamic environments such as greenhouses, where small terrain irregularities can lead to significant navigation errors. This article presents a novel terrain-adaptation strategy based on the carried payload, ensuring accurate and robust trajectory tracking. The proposed approach is based on: (i) the experimental characterization of the most common types of greenhouse soil, concrete, compacted sand, and gravel, and (ii) the direct measurement of terrain slope using the IMU, in order to estimate the force with which this angle affects the motor input. Based on this information, a cascade trajectory-tracking scheme has been designed, consisting of a model-based predictive controller (MPC) in the outer loop and a PI controller in the inner loop. The system incorporates an adaptive feedforward control through gain scheduling approach, capable of adjusting to disturbances caused by variations in slope and terrain type. Simulation results demonstrate that the differential-drive robot achieves a significant improvement both in error indices and in control signal efficiency, highlighting the effectiveness and robustness of the proposed approach.

0.44