CS Paper Radar

FINNAS: FINN-Guided Hardware-Aware NAS and Pruning for FPGA Jet Substructure Classification

Eva Chauffour, Changhong Li, Georgios Floros, Shreejith Shanker

cs.AR ·submitted 2026-09-14 21:29 UTC · v1
published

Abstract

FPGAs are well suited to deploying quantised neural networks (QNNs) under strict accuracy, latency, and resource constraints; however, identifying efficient model-accelerator combinations commonly requires extensive manual design-space exploration and repeated hardware synthesis. This paper presents FINNAS, a FINN-guided hardware-aware evolutionary neural architecture search framework. FINNAS jointly searches quantised MLP depth, width, and global precision settings, and ranks candidates using proxy validation accuracy together with FINN-estimated LUT usage and latency under a fully parallel mapping. Selected finalists are fully retrained, subjected to post-search unstructured pruning, and validated using RTL simulation and Vivado out-of-context synthesis. On the CERNBox jet substructure classification task, the searched implementations expose competitive accuracy-resource trade-offs. Compared with a manually optimised dense FINN accelerator, a compact FINNAS design improves accuracy from 73.78\% to 74.36\%, while reducing LUT usage by \(8.5\times\) and RTL-simulation latency by \(1.77\times\). Unstructured pruning further provides consistent LUT and FF reductions across the fully parallel finalists.

Comment
Accepted by ICECS'26

Closest papers

Nearest neighbours by meaning across the whole index.

Model Compression and Hardware-Aware Acceleration for Deep Learning on FPGAs: A Co-Design Taxonomy and Comparative Analysis

cs.AR ·2026-08-21 ·Peter Forcha, H. Kajekusumadhar, Mbua Peter, Muhammed Kawser, Audrey Cyriell Mo +1 more
survey similarity 0.65
Abstract

Deploying deep neural networks on Field-Programmable Gate Arrays (FPGAs) requires joint reasoning about model compression and hardware acceleration, however the most comprehensive existing cross-platform treatment of this space, Deng et al.~\cite{deng2020model}, compared compression techniques against CPU, GPU, FPGA, and ASIC targets at the level of broad, qualitative trade-offs, and not specific FPGA resource consequences. This survey instead restricted the scope to FPGAs alone and organized 25 compression-hardware co-design case studies (2015--2026) into a five-category taxonomy defined by which FPGA resources each strategy primarily reshapes: DSP-eliminating, DSP-repurposing/mixed-precision, sparsity-exploiting, memory-hierarchy-driven, and toolchain/deployment-level. Normalizing these case studies along a common set of dimensions (compression ratio, accuracy change, throughput, energy efficiency, and DSP/LUT/BRAM utilization) surfaces a central, quantitative finding; of the 25 reviewed works, only \emph{one} reported a compression ratio and accuracy change measured against a single common baseline, and only \emph{two} reported energy efficiency normalized against a common GPU baseline, exposing a field-wide characterization gap that no individual toolchain (FINN, HLS4ML, Vitis AI, or DNNWeaver) resolves on its own. Building on this taxonomy and meta-analysis, we formalize six open challenges: toolchain fragmentation, accuracy--efficiency characterization, automated mixed-precision optimization, sparse computation reliability, persistent memory bottlenecks, and FPGA-based training. Each is paired with a concrete next step grounded in extending an existing, cited technique, not a general call for future work.

0.21

NAS-Driven Hardware Accelerator Exploration for Edge AI and Quantization Effects on the Pareto Space

cs.AI ·2026-08-13 ·Eleftherios Mylonas, Angelos Kouprizas, Michael Birbas, Alexios Birbas
published similarity 0.64
Abstract · 6 pages, 6 figures, accepted for presentation to the 39th IEEE International System-on-Chip Conference, Heidelberg, Germany, September 30 - …

Edge AI deployment demands neural architectures that are simultaneously accurate, computationally efficient, and hardware-deployable - a challenge addressed by hardware-aware Neural Architecture Search (NAS). While recent works incorporate quantization directly into the NAS loop, these approaches expand search complexity and tightly couple architecture and quantization design. The simpler post-search quantization strategy has received little analytical attention: the effects of Post-Training Quantization (PTQ) on the NAS-discovered Pareto structure remain uncharacterised, and no framework combines quantized architecture mapping onto reconfigurable accelerators with automated hardware exploration. This paper addresses both gaps. First, a three-stage pipeline is proposed: a hardware-agnostic Pareto rank surrogate frontend on NAS-Bench-201, a quantization bridge with Pareto-aware filtering and feedback control, and an evolutionary Domain Space Exploration (DSE) backend on CGRA4ML for optimal hardware mapping. Second, an empirical study characterises how INT4 PTQ perturbs the NAS-Bench-201 Pareto space through formal stability metrics on ground-truth data for all 15,625 architectures, and demonstrates that an FP32 zero-shot surrogate outperforms a dedicated INT4-trained surrogate in Pareto space coverage across two standard search strategies.

0.22

Pruning Binarized Neural Networks: A Dedicated Framework and Globally Weighted Algorithms

cs.LG ·2026-08-26 ·Roan Rubiales, Jean Pierre David
similarity 0.62
Abstract · 9 pages, 3 figures, 5 tables, 3 algorithms

Extreme compression of deep neural networks, up to full binarization, dramatically reduces memory footprint and arithmetic complexity, facilitating deployment on constrained edge hardware with field-programmable gate arrays (FPGAs) and microcontrollers. Although combining binarization with pruning promises additional efficiency gains, existing pruning strategies are ill-suited to binarized representations and rarely translate into meaningful hardware savings. We introduce a PyTorch-based, research-oriented framework that incorporates freezing and pruning mechanisms for designing and optimizing binarized neural networks. The framework enables rapid and reproducible evaluation of state-of-the-art approaches and the fast prototyping of new ones. Leveraging this framework, we propose a novel pruning method that accounts for the relative importance of learned parameters across abstraction levels. Such a global weighting mechanism consistently achieves a superior trade-off between model accuracy and pruning rate, achieving a 70% pruning rate on VGG11 with constant accuracy, while state-of-the-art results reach only 41% in the binarized setting.

0.16

JET: Justification Evaluation in Transformer

cs.LG cs.PF ·2026-09-27 ·Shenghao Ding
code/data similarity 0.61
Abstract · 11 pages, 2 figures. Code: https://github.com/yet-another-ai/jet

JET uses pretrained language and vision-language models to select among a finite set of answers without additional training. It evaluates candidate likelihoods directly and shares computation across candidates. Experiments on desktop CPUs and consumer GPUs assess decision accuracy and execution cost. Qwen3.6-35B-A3B achieves 87.48% accuracy on the full MMLU test set and 3.69 requests per second on a separately timed MMLU subset. The accuracy-throughput comparison covers model, hardware, and reasoning choices, with Jev as an external reference. Controlled execution experiments show 2.18-2.23-fold speedups from prefix reuse and cache management, and a 30.8% reduction in process time from input preparation optimizations, with unchanged outputs. Optional reasoning has a task-dependent accuracy-throughput trade-off. These results support local decision inference from existing models.

0.42

qGAMMA: A Framework for Optimal DNN Mapping on Multi-Precision Accelerators

cs.AR cs.AI ·2026-10-16 ·Leandro Fiorin, Luigi Altamura, Cristina Silvano
published similarity 0.61
Abstract · Accepted at the 25th International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS XXV), 2025. To ap…

This work describes qGAMMA, a flexible framework for exploring and optimizing the mapping of mixed-precision Deep Neural Network (DNN) models onto general-purpose spatial accelerators that support a range of fixed- and floating-point precisions. qGAMMA navigates the design space using a domain-specific genetic algorithm and an analytical performance model based on hardware synthesis results. The framework identifies the optimal mapping and accelerator configuration that minimizes target metrics. Extensive evaluations across DNN workloads show that qGAMMA offers valuable insights for designing mixed-precision applications, enabling better trade-offs between performance, energy efficiency, and resource utilization.

0.62

FINN-Tro: Exploiting Verification Gaps in Dataflow Inference Accelerators

cs.AR eess.IV ·2026-09-20 ·Qazi Arbab Ahmed, Suraj Karki, Thorsten Jungeblut
similarity 0.61
Abstract

The growing adoption of dataflow accelerators for neural network inference introduces new attack surfaces that existing verification methodologies fail to address. Inference ac- celeration frameworks such as FINN, which transform quantized neural networks into FPGA-deployable dataflow architectures, implicitly assume semantic equivalence between the software model and the synthesized hardware. In this work, we in- troduce the FINN-Tro attack, which identifies and exploits a critical verification gap in the FINN compilation pipeline that enables stealthy hardware Trojan insertion without modifying the original quantized model. The Trojan is placed in the last Matrix-Vector Activation Unit (MVAU) layer and supports two counter-based trigger modes, periodic and persistent, and three payload types: bias addition, logit swapping, and bias subtraction, resulting in six different configurations. FINN-Tro is evaluated on an MNIST feed-forward network and a CIFAR-10 convolutional neural network deployed on a PYNQ-Z1 board. Across the evaluated configurations, accuracy reductions range from 0.90% to 82.84%, while throughput and runtime remain close to the corresponding baseline designs. The most severe configuration, persistent Bias Addition, reduces accuracy from 92.96% to 10.12% on MNIST and from 84.19% to 10.00% on CIFAR-10. The inserted logic introduces modest implementation overhead, with maximum LUT and FF increases of 6.71% and 7.49% for MNIST, and 2.50% and 3.98% for CIFAR-10, respectively. Our findings reveal that widely used pre- and post- compilation verification flows are insufficient for detecting such temporally delayed hardware manipulations, motivating the need for stronger verification mechanisms in accelerator toolchains.

0.31

MOSHO: A Native Discrete Shark-Inspired Metaheuristic for Hardware-Aware Neural Architecture Search

cs.NE cs.AIcs.LG ·2026-10-23 ·Nazim Abdeerhmane Aouni, Zakaria Soualah Mohammed, Maroua Ogab, Nour El Imane Elbar, Rayane Rahmat Errahmane Smara +5 more
benchmark similarity 0.61
Abstract

Hardware-aware neural architecture search (NAS) requires jointly optimizing predictive accuracy and device-specific latency over discrete search spaces. While multi-objective swarm optimizers show promise, continuous formulations such as the Multi-Objective White Shark Optimizer (MOWSO) can suffer from quantization noise when rounded to integer-encoded architecture vectors. To address this limitation, we propose MOSHO (Multi-Objective Shark Hunting Optimization), a native discrete metaheuristic that replaces continuous motion equations with discrete architecture-editing operators. MOSHO integrates adaptive operator scheduling, energy-regulated restarts, and deferred crowding-distance truncation to enhance exploration and search efficiency. On the merged NAS-Bench-201/HW-NAS-Bench benchmark across 18 contexts, MOSHO achieves a median normalized hypervolume of 0.9987 and IGD+ of 0.0064, yielding Pareto fronts competitive with NSGA-II while reducing search runtime by 96.4% (0.64 s vs. 17.72 s). These results demonstrate that tailored discrete search mechanisms can enable swarm optimizers to achieve high-quality multi-objective solution quality with substantially lower search cost in hardware-aware NAS.

0.19

SCRAMJet: An Ultra Low Latency JetClass-Scale Transformer for the HL-LHC Level-1 Trigger

cs.LG physics.ins-dethep-ex ·2026-10-20 ·Aadeesh Sharma, Chang Sun, Lauri Laatu, Arianna Cox, Benedikt Maier +4 more
code/data similarity 0.60
Abstract

Level-1 Triggers at the LHC classify collisions within a few microseconds on FPGAs, where a network is a fully unrolled circuit whose cost is area rather than time. We present SCRAMJet, a transformer encoder that replaces multi-head attention with a low-rank projection, trains under per-parameter learned fixed-point quantization, and compiles to Verilog with distributed arithmetic optimization. On the ten-class JetClass dataset it reaches $71.4 \pm 0.6\%$ accuracy with 0.157M multiply-accumulates, 6.1 accuracy points above the strongest published resource-constrained model at an eighth of the operations, and meets timing on a Virtex UltraScale+ VU13P at 147 ns using 25.7% of the logic. We also show that resource-aware training silently removes attention channels: one whose learned bit-width reaches zero still carries signal during training but is absent from the compiled circuit, so the loss never sees it go. We call these virtual channels, and a floor on the attention datalane that prevents them is worth 3.1 accuracy points at matched budget. Code and trained checkpoints are available at https://github.com/Aaddy-1/hgq-jetformer.

0.28