CS Paper Radar

FINN-Tro: Exploiting Verification Gaps in Dataflow Inference Accelerators

Qazi Arbab Ahmed, Suraj Karki, Thorsten Jungeblut

cs.AR eess.IV ·submitted 2026-09-20 15:27 UTC · v1

Abstract

The growing adoption of dataflow accelerators for neural network inference introduces new attack surfaces that existing verification methodologies fail to address. Inference ac- celeration frameworks such as FINN, which transform quantized neural networks into FPGA-deployable dataflow architectures, implicitly assume semantic equivalence between the software model and the synthesized hardware. In this work, we in- troduce the FINN-Tro attack, which identifies and exploits a critical verification gap in the FINN compilation pipeline that enables stealthy hardware Trojan insertion without modifying the original quantized model. The Trojan is placed in the last Matrix-Vector Activation Unit (MVAU) layer and supports two counter-based trigger modes, periodic and persistent, and three payload types: bias addition, logit swapping, and bias subtraction, resulting in six different configurations. FINN-Tro is evaluated on an MNIST feed-forward network and a CIFAR-10 convolutional neural network deployed on a PYNQ-Z1 board. Across the evaluated configurations, accuracy reductions range from 0.90% to 82.84%, while throughput and runtime remain close to the corresponding baseline designs. The most severe configuration, persistent Bias Addition, reduces accuracy from 92.96% to 10.12% on MNIST and from 84.19% to 10.00% on CIFAR-10. The inserted logic introduces modest implementation overhead, with maximum LUT and FF increases of 6.71% and 7.49% for MNIST, and 2.50% and 3.98% for CIFAR-10, respectively. Our findings reveal that widely used pre- and post- compilation verification flows are insufficient for detecting such temporally delayed hardware manipulations, motivating the need for stronger verification mechanisms in accelerator toolchains.

Closest papers

Nearest neighbours by meaning across the whole index.

BARE-AI: Bit-Flip Attack Resilience in AI Hardware through Built-in Performance Monitors

cs.CR ·2026-10-06 ·Habibur Rahaman, Swastik Bhattacharya, Sanjay Das, Kanad Basu, Swarup Bhunia
similarity 0.64
Abstract

Deep Neural Networks (DNNs) are integral to many safety critical systems, yet they remain highly vulnerable to bit-flip attacks (BFAs), where a few memory level perturbations can drastically degrade accuracy. Existing defenses incur significant hardware overhead, depend on retraining, or fail against targeted flips. We propose BARE-AI, a runtime framework that detects, localizes, and mitigates BFAs during inference. BARE-AI introduces AI Performance Counters (APCs), lightweight hardware monitors in the accelerator datapath that capture per-layer activation statistics such as sparsity, entropy, kurtosis, and spectral shift. These are analyzed by the Predictive Unit for Layer Security Evaluation (PULSE), a compact detector trained offline as an ensemble of classifiers and realized on-chip as a small neural engine. For explainability and recovery, BARE-AI introduces an Activation Shift Index (ASI) for layer level fault localization and a z-score based repair that resets anomalous weights toward clean layer statistics. Across CNNs, Vision Transformers, and Large Language Models under random, targeted, adaptive, and magnitude based BFAs, BARE-AI achieves up to 98% detection accuracy on vision models and 74% to 95% on language models, restores near clean accuracy for CNNs and ViTs, and provides partial recovery for LLMs. Synthesized at 28nm, the monitoring infrastructure incurs under 3% energy, under 4% area, and about 10% latency overhead, with a configurable operating point that reduces latency overhead to about 6%. Unlike error correcting codes, whose redundancy grows with the number of tolerated flips, BARE-AI's overhead remains constant regardless of attack strength, making it attractive for resource constrained, safety critical edge applications such as autonomous systems, energy, and healthcare.

0.43

Architecting the Secure AI-SOC: A Neurosymbolic Framework for Pipeline Integrity and Threat Mitigation

cs.CR cs.AI ·2026-09-09 ·Anna Gazani, Spyridon Kounoupidis, Panagiotis Katsaros, Nikolaos Kekatos, Grigorios Tsoumakas +1 more
similarity 0.63
Abstract · 21 pages

The integration of Large Language Models (LLMs) into Security Operations Centers (SOCs) streamlines threat intelligence but introduces critical vulnerabilities, notably indirect prompt injection via log poisoning. Adversaries exploit this vector to execute multistep ``promptware'' kill chains by embedding malicious payloads within system logs to hijack the LLM's operational logic. Securing this pipeline presents a dichotomy: deterministic defenses are computationally efficient yet semantically blind, while purely neural evaluations introduce prohibitive latency and probabilistic flaws. To address this, we propose a novel neurosymbolic defense-in-depth architecture that ensures end-to-end pipeline integrity. The primary layer employs customized SIEM decoders as a deterministic pre-filter, performing immediate structural sanitization to neutralize volumetric padding and signature-based injections at the ingestion edge. The secondary layer leverages NeMo Guardrails to enforce strict semantic boundaries through self-checking validation on the structured SIEM alerts prior to LLM processing. Furthermore, the framework integrates a closed-loop telemetry system, providing critical Human-in-the-Loop (HITL) visibility into thwarted attacks directly within the SOC dashboard. We present a comprehensive experimental evaluation mapped to the MITRE ATLAS taxonomy, assessing the framework against diverse prompt injections. Our results demonstrate that this synergistic approach effectively dismantles the promptware kill chain - bounding LLM stochasticity with verifiable constraints, and delivering a resilient, highly observable defense mechanism for next-generation AI-SOCs.

0.27

BLINK: Batch Normalization-based Integrity Checkpoints for In-Situ Detection and Mitigation of Diverse Weight Corruptions in DNN Accelerators

cs.AR ·2026-09-06 ·Marzia Khan, Akul Malhotra, Sumeet Kumar Gupta
similarity 0.63
Abstract

In safety-critical deployments, AI hardware must remain reliable against a broad spectrum of threats such as aging, soft errors, hard faults, and adversarial attacks (e.g. progressive bit flip attack (PBFA)). All of these corrupt stored weights while the chip keeps producing confident but inaccurate predictions. Detecting and mitigating such weight perturbations is crucial for safety-critical platforms. To that end, we propose BLINK, an on-chip batch normalization (BN)-based on-the-fly detection and mitigation approach, which is based on continual sensing of the shift in the activation statistics, and targets a wide variety of weight corruptions (random and localized faults as well as adversarial bit flips). BLINK operates in two phases: (1) off-line pre-characterization of the relationship of the activation shifts with inference accuracy drop, and (2) on-chip runtime detection and mitigation of weight corruptions. Upon detection, the flagged layer is re-centered to bring it closer to its stored clean reference within the same forward pass. BLINK is fully autonomous, eliminating the need for host communication, operation halts, or access to fine-tuning data. If the residual shift after mitigation indicates that accuracy has fallen below a user-set floor, a held-out watcher aborts the inference. Evaluated on ResNet-20/50 and MobileNetV2 for CIFAR-10/100, BLINK detects harmful corruptions with >99% precision across all fault types. Further, it recovers accuracy from 10% to 85.88% under 0.5% random bit flips (Resnet-50/CIFAR-10), up to 84% for localized faults (MobileNetV2/CIFAR-10), and from random-guess accuracy to 80%-83% under PBFA (ResNet-20/CIFAR-10). Hardware overhead estimates indicate that BLINK incurs negligible costs, with less than a 2% increase in latency and only a 0.53% increase in computation overhead.

0.26

FINNAS: FINN-Guided Hardware-Aware NAS and Pruning for FPGA Jet Substructure Classification

cs.AR ·2026-09-14 ·Eva Chauffour, Changhong Li, Georgios Floros, Shreejith Shanker
published similarity 0.61
Abstract · Accepted by ICECS'26

FPGAs are well suited to deploying quantised neural networks (QNNs) under strict accuracy, latency, and resource constraints; however, identifying efficient model-accelerator combinations commonly requires extensive manual design-space exploration and repeated hardware synthesis. This paper presents FINNAS, a FINN-guided hardware-aware evolutionary neural architecture search framework. FINNAS jointly searches quantised MLP depth, width, and global precision settings, and ranks candidates using proxy validation accuracy together with FINN-estimated LUT usage and latency under a fully parallel mapping. Selected finalists are fully retrained, subjected to post-search unstructured pruning, and validated using RTL simulation and Vivado out-of-context synthesis. On the CERNBox jet substructure classification task, the searched implementations expose competitive accuracy-resource trade-offs. Compared with a manually optimised dense FINN accelerator, a compact FINNAS design improves accuracy from 73.78\% to 74.36\%, while reducing LUT usage by \(8.5\times\) and RTL-simulation latency by \(1.77\times\). Unstructured pruning further provides consistent LUT and FF reductions across the fully parallel finalists.

0.35

ShiftQAT: Quantization-Aware Training for the Numerical Contract of a Fixed-Function Edge CNN Accelerator

cs.LG ·2026-10-15 ·Oguzhan Buyuksolak, Osman Erman Okman, Mehmet Gorkem Ulkar
code/data similarity 0.60
Abstract

Fixed-function CNN accelerators make edge inference fast and energy-efficient, but they execute only networks that obey a precise numerical contract. On the MAX7800x family, this contract requires power-of-two, per-tensor, symmetric scales, 8-bit activations and biases, integer-only arithmetic, and one statically configured shift per layer. We present ShiftQAT, the quantization-aware training (QAT) flow we developed for this family, which produces networks satisfying the contract by construction. It is the default training path of ai8x-training, the family's open-source training toolchain. ShiftQAT resolves residual, concatenation, and weight-sharing dependencies so that activation scales propagate statically and each layer's requantization reduces to one offline-configured shift. It also trains weights and biases on a joint power-of-two grid that fits the 8-bit bias budget. Among the compared methods, only ShiftQAT satisfies all of the contract's scaling constraints, including signed 8-bit activation storage. Even so, on ImageNet it matches the W8A8 accuracy drop of less constrained QAT methods and stays within 2.9 percentage points of FP32 at W4A8. On MAX78002 silicon, ShiftQAT-trained MobileNetV2 and ResNet-18 classify ImageNet images in 14.6 and 8.4 ms at 5.1 and 2.8 mJ per inference.

0.20

TERMon: Detecting Persistent Behavioral Threats in Edge AI via Hardware-Native Ternary Runtime Monitor

cs.CR cs.AI ·2026-09-18 ·Arish Sateesan, Edlira Dushku
published similarity 0.60
Abstract

Edge AI accelerators are increasingly deployed in safety-critical environments, where model outputs may control physical actuators, make access-control decisions, or trigger alarms. In these settings, runtime failures often remain undetected because model corruption, distribution shift, and adversarial inputs can still produce well-formed, confident predictions. This paper presents TERMon, a lightweight hardware runtime monitor that detects such anomalies by observing inference behavior rather than re-executing or formally verifying the model. TERMon represents class-conditional trusted behavior as hardware-efficient ternary patterns that are matched in parallel against a thermometer-encoded fingerprint. The ternary encoding reproduces the corresponding unquantized range decision exactly. TERMon detects harmful weight corruptions in proportion to their behavioral impact, while out-of-distribution and adversarial inputs are largely not separable using the monitored features at a strict false-positive operating point. We implemented TERMon on a PYNQ-Z2 FPGA, and the pipelined design requires no on-chip block RAM or DSPs and has a two-cycle decision latency.

0.40

Can LLMs Write Backdoors? An Empirical Security Study of Weight-Space Programming

cs.CR cs.AIcs.LG ·2026-11-12 ·Zhaojia Wang, Jiucui Lu, Zheng Li
similarity 0.59
Abstract

Recent advances in weight-space programming (WSP) have demonstrated that large language models (LLMs) can directly inspect and modify neural network weights without conventional gradient-based training. While this capability opens new possibilities for model improvement, it also raises an important security question: Can LLMs exploit weight-space programming to inject backdoors into neural networks? To answer this question, we present an empirical security study of LLM-driven weight-space programming for backdoor injection. Specifically, we investigate whether general-purpose LLMs can directly modify the weights of target models according to natural-language instructions, without accessing task-specific data, performing forward passes, or computing gradients. We evaluate five LLMs as weight editors across three target architectures: an MLP on MNIST, ResNet-18 on CIFAR-10, and Qwen2.5-0.5B-Instruct on AG News. Our experiments reveal three key findings. First, LLM-driven weight editing can successfully inject backdoors across different architectures while largely preserving clean performance. Second, successful attacks can require remarkably few parameter modifications, including only six parameters for the MLP and 0.02% of the weights for a fine-tuned Qwen model. Third, editing capabilities vary substantially across LLMs and target architectures: although all five LLMs successfully backdoor the MLP, only GPT-6 Astra succeeds across all three targets. These findings highlight an emerging security risk of weight-space programming and underscore the importance of safeguarding LLM-driven weight editing.

0.28

VulDec: Vulnerability Detection in Binaries via Neural Decompilation

cs.CR cs.LGcs.SE ·2026-10-24 ·Francesco Crescenzo Grasso, Pietro Liguori, Roberto Natella, Domenico Cotroneo
code/data similarity 0.59
Abstract · Submitted to Automated Software Engineering

Automated vulnerability detection in binary executables is challenging due to the lack of source code and the limited semantic information available at the assembly level. Despite significant progress in machine-learning-based code analysis, the field still lacks methodologies and large, high-quality datasets that provide vulnerable code jointly at assembly- and source-level with precise vulnerability labels. To address this gap, we introduce VulDec, consisting of (i) a new large-scale, carefully curated dataset aligning real-world Assembly-C function pairs with detailed CWE annotations across multiple architectures, and (ii) the first end-to-end framework that leverages neural decompilation for binary vulnerability detection. Tuned LLM-based neural decompilers trained on our dataset achieve strong source-level recovery across architectures (Edit Similarity of approximately 56%, BLEU-4 of approximately 43%), while our tuned LLM-based detectors reach a macro F1-score of 0.61 on an in-distribution realistic test set (3% vulnerability rate). Our findings provide evidence that neural decompilation offers a powerful alternative to conventional low-level binary representations, facilitating robust binary vulnerability detection.

0.35