CS Paper Radar

BLINK: Batch Normalization-based Integrity Checkpoints for In-Situ Detection and Mitigation of Diverse Weight Corruptions in DNN Accelerators

Marzia Khan, Akul Malhotra, Sumeet Kumar Gupta

cs.AR ·submitted 2026-09-06 18:56 UTC · v1

Abstract

In safety-critical deployments, AI hardware must remain reliable against a broad spectrum of threats such as aging, soft errors, hard faults, and adversarial attacks (e.g. progressive bit flip attack (PBFA)). All of these corrupt stored weights while the chip keeps producing confident but inaccurate predictions. Detecting and mitigating such weight perturbations is crucial for safety-critical platforms. To that end, we propose BLINK, an on-chip batch normalization (BN)-based on-the-fly detection and mitigation approach, which is based on continual sensing of the shift in the activation statistics, and targets a wide variety of weight corruptions (random and localized faults as well as adversarial bit flips). BLINK operates in two phases: (1) off-line pre-characterization of the relationship of the activation shifts with inference accuracy drop, and (2) on-chip runtime detection and mitigation of weight corruptions. Upon detection, the flagged layer is re-centered to bring it closer to its stored clean reference within the same forward pass. BLINK is fully autonomous, eliminating the need for host communication, operation halts, or access to fine-tuning data. If the residual shift after mitigation indicates that accuracy has fallen below a user-set floor, a held-out watcher aborts the inference. Evaluated on ResNet-20/50 and MobileNetV2 for CIFAR-10/100, BLINK detects harmful corruptions with >99% precision across all fault types. Further, it recovers accuracy from 10% to 85.88% under 0.5% random bit flips (Resnet-50/CIFAR-10), up to 84% for localized faults (MobileNetV2/CIFAR-10), and from random-guess accuracy to 80%-83% under PBFA (ResNet-20/CIFAR-10). Hardware overhead estimates indicate that BLINK incurs negligible costs, with less than a 2% increase in latency and only a 0.53% increase in computation overhead.

Closest papers

Nearest neighbours by meaning across the whole index.

BARE-AI: Bit-Flip Attack Resilience in AI Hardware through Built-in Performance Monitors

cs.CR ·2026-10-06 ·Habibur Rahaman, Swastik Bhattacharya, Sanjay Das, Kanad Basu, Swarup Bhunia
similarity 0.71
Abstract

Deep Neural Networks (DNNs) are integral to many safety critical systems, yet they remain highly vulnerable to bit-flip attacks (BFAs), where a few memory level perturbations can drastically degrade accuracy. Existing defenses incur significant hardware overhead, depend on retraining, or fail against targeted flips. We propose BARE-AI, a runtime framework that detects, localizes, and mitigates BFAs during inference. BARE-AI introduces AI Performance Counters (APCs), lightweight hardware monitors in the accelerator datapath that capture per-layer activation statistics such as sparsity, entropy, kurtosis, and spectral shift. These are analyzed by the Predictive Unit for Layer Security Evaluation (PULSE), a compact detector trained offline as an ensemble of classifiers and realized on-chip as a small neural engine. For explainability and recovery, BARE-AI introduces an Activation Shift Index (ASI) for layer level fault localization and a z-score based repair that resets anomalous weights toward clean layer statistics. Across CNNs, Vision Transformers, and Large Language Models under random, targeted, adaptive, and magnitude based BFAs, BARE-AI achieves up to 98% detection accuracy on vision models and 74% to 95% on language models, restores near clean accuracy for CNNs and ViTs, and provides partial recovery for LLMs. Synthesized at 28nm, the monitoring infrastructure incurs under 3% energy, under 4% area, and about 10% latency overhead, with a configurable operating point that reduces latency overhead to about 6%. Unlike error correcting codes, whose redundancy grows with the number of tolerated flips, BARE-AI's overhead remains constant regardless of attack strength, making it attractive for resource constrained, safety critical edge applications such as autonomous systems, energy, and healthcare.

0.43

Capacity Overflow: A Blind Spot for Backdoor Attacks in Vision MoE

cs.CV cs.CR ·2026-08-26 ·Xiaocheng Zou, Tiancheng Zheng, Xiaolin Xu, Ruyi Ding
top venue similarity 0.67
Abstract · 17 pages, 3 figures, ECCV2026

Mixture-of-Experts (MoE) has become a prevalent paradigm for scaling Vision Transformers efficiently. To ensure computational scalability and prevent expert overload, Vision MoE architectures employ a capacity-bounded token dispatch mechanism, where each expert's processing budget depends on the inference batch size. This work identifies this batch-dependent behavior as an overlooked attack surface, and proposes a stealthy supply-chain backdoor attack that exploits this property through a three-phase framework. First, we inject a backdoor into an early MoE layer. Second, we train a neutralizer in a deeper MoE layer that suppresses the backdoor under normal capacity. Third, we configure a batch-adaptive capacity factor that preserves high capacity for small batches while reducing it for large batches, naturally disabling the neutralizer via token overflow at deployment-scale batch sizes. The attack remains in dormant mode during small-batch security audits and enters activation mode during large-batch deployment. Experiments on V-MoE and Swin-MoE across ImageNet-100 and GTSRB demonstrate activation-mode attack success rates of 76-87% with dormant-mode ASR below 9%, while evading Neural Cleanse, STRIP, Fine-Pruning, and Activation Clustering. Our findings reveal a fundamental security risk arising from batch-dependent execution in scalable Vision MoE architectures.

0.36

TERMon: Detecting Persistent Behavioral Threats in Edge AI via Hardware-Native Ternary Runtime Monitor

cs.CR cs.AI ·2026-09-18 ·Arish Sateesan, Edlira Dushku
published similarity 0.64
Abstract

Edge AI accelerators are increasingly deployed in safety-critical environments, where model outputs may control physical actuators, make access-control decisions, or trigger alarms. In these settings, runtime failures often remain undetected because model corruption, distribution shift, and adversarial inputs can still produce well-formed, confident predictions. This paper presents TERMon, a lightweight hardware runtime monitor that detects such anomalies by observing inference behavior rather than re-executing or formally verifying the model. TERMon represents class-conditional trusted behavior as hardware-efficient ternary patterns that are matched in parallel against a thermometer-encoded fingerprint. The ternary encoding reproduces the corresponding unquantized range decision exactly. TERMon detects harmful weight corruptions in proportion to their behavioral impact, while out-of-distribution and adversarial inputs are largely not separable using the monitored features at a strict false-positive operating point. We implemented TERMon on a PYNQ-Z2 FPGA, and the pipelined design requires no on-chip block RAM or DSPs and has a two-cycle decision latency.

0.40

FINN-Tro: Exploiting Verification Gaps in Dataflow Inference Accelerators

cs.AR eess.IV ·2026-09-20 ·Qazi Arbab Ahmed, Suraj Karki, Thorsten Jungeblut
similarity 0.63
Abstract

The growing adoption of dataflow accelerators for neural network inference introduces new attack surfaces that existing verification methodologies fail to address. Inference ac- celeration frameworks such as FINN, which transform quantized neural networks into FPGA-deployable dataflow architectures, implicitly assume semantic equivalence between the software model and the synthesized hardware. In this work, we in- troduce the FINN-Tro attack, which identifies and exploits a critical verification gap in the FINN compilation pipeline that enables stealthy hardware Trojan insertion without modifying the original quantized model. The Trojan is placed in the last Matrix-Vector Activation Unit (MVAU) layer and supports two counter-based trigger modes, periodic and persistent, and three payload types: bias addition, logit swapping, and bias subtraction, resulting in six different configurations. FINN-Tro is evaluated on an MNIST feed-forward network and a CIFAR-10 convolutional neural network deployed on a PYNQ-Z1 board. Across the evaluated configurations, accuracy reductions range from 0.90% to 82.84%, while throughput and runtime remain close to the corresponding baseline designs. The most severe configuration, persistent Bias Addition, reduces accuracy from 92.96% to 10.12% on MNIST and from 84.19% to 10.00% on CIFAR-10. The inserted logic introduces modest implementation overhead, with maximum LUT and FF increases of 6.71% and 7.49% for MNIST, and 2.50% and 3.98% for CIFAR-10, respectively. Our findings reveal that widely used pre- and post- compilation verification flows are insufficient for detecting such temporally delayed hardware manipulations, motivating the need for stronger verification mechanisms in accelerator toolchains.

0.31

RobustNCL: Robustifying Neuromorphic Continual Learning under Transient Faults with Lightweight Detect-and-Cure Strategy

cs.NE cs.AIcs.LG ·2026-10-22 ·Rachmad Vidya Wicaksana Putra, Shuochen Zhou, Muhammad Shafique
hot direction similarity 0.62
Abstract · 12 pages, 6 figures, 3 tables

In neural networks, continual learning (CL) is a prominent approach for enabling deployed systems to adapt to dynamic operational environments by effectively learning from new unseen data at runtime. Recently, the neuromorphic continual learning (NCL) concept has emerged as an energy-efficient alternative to CL by leveraging sparse event-based operations. However, NCL performance can be undermined by transient faults in the hardware platforms, which may come from high-energy particle strikes at any time. Currently, NCL reliability under transient faults has not been studied, and hence the corresponding fault-tolerance techniques remain unexplored. To address this, we propose a novel RobustNCL framework to improve NCL reliability in the presence of transient faults in the DRAM-based off-chip memory of hardware platforms through a lightweight detect-and-cure strategy. Specifically, it first monitors the presence of faults during weight data access from off-chip memory, and then cures the accessed weights if anomalous signatures are detected. It provides three curing variants: replacement with zero, min/max value, and most-probable value from the original/clean weight distribution. To support this, the weight curing values are stored in the radiation-hardened memory. Experimental results show that, in the presence of high fault rates (e.g., 5x10^{-4} for memory replay), RobustNCL maintains high accuracy close to the accuracy of fault-free models (i.e., within -0.5% accuracy for the best RobustNCL variant) and significantly improves accuracy from the baseline without fault mitigation across different NCL methods and datasets (i.e., Split MNIST, Split Fashion-MNIST, Split CIFAR-10, and Split CIFAR-100), while incurring negligible latency and energy overheads. These results highlight that our RobustNCL framework is a promising approach for enabling reliable and energy-efficient NCL systems.

0.30

Phantom Forgetting: How BatchNorm State Fakes Deletion in Edge Split Machine Unlearning

cs.CR ·2026-10-26 ·Anand Agrawal, Anil Kumar Chillara, Naresh Mandan
similarity 0.62
Abstract

Split learning is a natural fit for edge intelligence: a resource-constrained edge device runs the first layers of a network and offloads the remainder to a server, so that raw data never leave the device. When such a system must unlearn revoked or sensitive data for example to honor a right-to-erasure request, the deletion is commonly assessed through changes in forget-set accuracy. However, inference on an edge-server split also depends on non-learnable model state distributed across the two parties, and this state is especially volatile on edge devices subject to data drift, over-the-air updates, and checkpoint rollback. This paper isolates a state-integrity question with direct edge-security implications: can Batch Normalization (BN) running statistics create a target-specific forgetting signal even when every learnable weight remains fixed? We define a state-only diagnostic that separates learnable-parameter change from BN- buffer change and localizes the effect to the edge (client) side, the server side, and joint placements. We also introduce a state-induced forgetting gap (SIFG) that discounts simultaneous retain-set degradation. Over all ten CIFAR-10 forget classes, centralized BN recalibration on forget data reduces mean forget accuracy by 61.50 percentage points with zero weight change; in a split model, edge-only, server-only, and joint recalibration produce mean drops of 37.27, 41.71, and 51.90 points. The server-side state yields the largest selective gap relative to retain degradation, while joint recalibration causes the largest overall prediction change. These results establish distributed normalization buffers including those held on the edge device as security and privacy-relevant inference state, and show that forget accuracy should not be interpreted, or accepted as a deletion certificate, without an explicit edge-aware state-integrity audit.

0.33

RAPID-DNN: Reliability-Aware Partitioning for Robust DNN Inference Deployment on Edge AI

cs.ET ·2026-10-08 ·Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay
similarity 0.61
Abstract

Deep neural networks (DNNs) deployed on heterogeneous edge accelerators are increasingly exposed to runtime hardware faults. Tight power and resource budgets push these platforms toward aggressive voltage scaling and limit the use of hardware fault mitigation, while process variation, thermal stress, and device aging raise fault rates further. The resulting transient bit level corruptions propagate through inference and can sharply reduce prediction accuracy. Existing DNN partitioning frameworks optimize latency and energy under fault free assumptions, so their deployment strategies often fail to sustain reliable inference in realistic operating conditions. This paper presents RAPID DNN, a reliability aware partitioning framework that adds runtime reliability as a third optimization objective alongside latency and energy. RAPID DNN first characterizes layer wise reliability through systematic fault injection in the weight and activation domains to identify vulnerability critical layers. The resulting sensitivity profile guides a three objective NSGA II optimizer that jointly minimizes inference latency, energy consumption, and expected fault induced accuracy degradation. We evaluate RAPID DNN on AlexNet, SqueezeNet, ResNet18, VGG16, and MobileNetV2 using heterogeneous Eyeriss and SIMBA accelerator profiles. Across fault models and injection probabilities, it consistently improves inference robustness over the fault agnostic baseline. Under the representative mixed random fault configuration, RAPID DNN raises average Top 1 accuracy by 9.81 percentage points and reduces average expected fault induced accuracy degradation by 36.86%, at a cost of 2.38% average latency overhead and 3.34% average energy overhead. These results show that treating reliability as a partitioning objective enables robust DNN deployment on heterogeneous edge accelerators under runtime hardware faults.

0.16

Characterizing the Variance Envelope: A Multi-Dimensional Analysis of Spectre Telemetry Across Architectures and Workloads

cs.CR cs.AR ·2026-08-14 ·Jaya Keshava Chandra Kotha, Jean-Luc Gaudiot
similarity 0.61
Abstract

Hardware attacks like Spectre exploit built-in processor vulnerabilities, leaving anomalous footprints in Hardware Performance Counter (HPC) metrics. While machine learning can detect these footprints in controlled settings, static models fail in the real world when confronted with background system noise, diverse attack variants, and adversarial traffic pacing. To close this gap, this paper characterizes the "variance envelope"-the full range of how attack signatures shift- across Intel, ARM, and AMD architectures. We evaluate an extensive experimental matrix encompassing three attack variants, four pacing modes, and four background-noise conditions. Our analysis proves that HPC signatures are highly fragile and easily warped by their execution environment. Furthermore, we expose a critical microarchitectural bottleneck: the persistent, hardware-level failure of Prime+Probe attacks on the AMD Jaguar. Ultimately, this comprehensive characterization demonstrates that reliable runtime detection requires architecture-aware, adaptive monitoring rather than static models.

0.04