CS Paper Radar

Exo-GPU: Safe, Imperative, User-schedulable Programming for Tensor Cores

David Zhao Akeley, Yuka Ikarashi, Jonathan Ragan-Kelley

cs.PL ·submitted 2026-09-14 21:55 UTC · v1

Abstract

Modern GPUs require not only SIMT-style parallelism but also software-managed concurrency between compute and data movement to reach maximum performance. Performance engineers must reason about subdividing work into the hierarchy of computation resources (threads, warps, warpgroups, blocks, clusters), and, in many cases, also must use asynchronous tensor core and memcpy instructions on different levels of the memory hierarchy (registers, tensor core accumulators, shared memory, global memory). Unlike CPUs, where out-of-order execution is managed by hardware and hidden from programmers, GPUs expose explicit instruction reordering to software through these asynchronous instructions. Well-established GPU programming languages generally offer either direct low-level control without safety guarantees (e.g., CUDA C++ inline assembly or intrinsics) or easier-to-analyze, high-level abstractions (e.g., Triton's tile-based model) that hide asynchronous instructions in the compiler backend, which may prevent performance engineers from maximizing performance by tuning critical details. We propose Exo-GPU, an imperative, low-level language that creates minimal abstraction over CUDA. Our key idea is to treat parallelism and synchronization as mere annotations on sequential code rather than as fundamental control flow primitives, enabling verification that these constructs do not alter the program semantics. The benefit is twofold: programmers can reason about code without hidden control flow or mutation, while allowing the Exo-GPU compiler to verify sequential-parallel equivalence--guaranteeing that parallel execution is functionally equivalent to its sequential interpretation. We used Exo-GPU to author GEMM kernels for the H100 GPU, using wgmma, TMA, and split-k. Our kernels achieved over 80% of theoretical peak on large problem sizes, in some cases outperforming the vendor-provided CUBLAS library.

Comment
29 pages, 22 figures, no conference publication. NOTE: red/blue arcs on page 5 are part of the exposition, NOT editing marks

Closest papers

Nearest neighbours by meaning across the whole index.

A Thread-Register Decoupled GPU Execution Model for Efficient Tensor Computation

cs.AR ·2026-08-20 ·Zihan Liu, Jingwen Leng, Yangjie Zhou, Yitong Ding, Guanlin Zhu +10 more
similarity 0.73
Abstract

Modern GPUs increasingly integrate Tensor Cores into the execution pipeline. Although aggregate tensor throughput continues to grow, aided by an operand supply that has evolved from register-based in Ampere to redundancy-free, memory-based in Hopper and Blackwell, efficiently orchestrating the complete tensor compute pipeline for the modern AI workloads remains challenging. We identify the fundamental bottlenecks as fixed parallelism and coarse-grained scheduling, both of which are exposed by modern AI workloads that interleave diverse non-GEMM operations with GEMM. To orchestrate tensor computation efficiently, we propose FIBER, a new architecture that extends the GPU SIMT (single instruction, multiple thread) model. Its basic execution instance, the \emph{fiber}, is decoupled from private register ownership, carrying only minimal control state while accessing an SM's registers through a shared view. This enables dynamic parallelism scaling, fine-grained register-level dataflow scheduling, and offers a redundancy-free alternative for matrix operand supply. We extend the ISA, microarchitecture, and compiler to realize shared-register addressing, conflict-free operand delivery, and fiber-based program mapping. Under a typical mixed-precision LLM serving scenario, FIBER achieves a 2.25x end-to-end speedup on Ampere (1.15x for the original FP16 computation), with 1.8x and 2.09x on Hopper and Blackwell respectively, and kernel-level gains up to 2.49x.

0.37

Dissecting an Unexplored SASS Control-Code Field: Barrier Exemption and Programmable Warp Priority

cs.AR cs.DCcs.PF ·2026-11-18 ·Ziwen Wang, Qi Luo, Kunlin Li, Changxi Liu, Dongsheng Wang +1 more
similarity 0.71
Abstract · 7 pages, 6 figures, 3 tables

Every instruction in NVIDIA's native GPU ISA (SASS) carries a control code that guides hardware scheduling, and prior work has decoded its known fields to optimize GPU kernels. However, one control-code field remains unexplored: it appears over 500000 times in NVIDIA's closed-source libraries such as cuBLAS and cuDNN, yet nvcc never emits it when compiling user programs. This paper presents the first systematic study of this control-code field across GPU architectures from Volta to Blackwell. Using instruction-level microbenchmarks, we show that the field controls two independent hardware mechanisms: barrier exemption (EXEMPT), which allows instructions blocked by a pending barrier to issue early during the barrier wait, and programmable warp priority (START, TILE, and END), which moves warps across three priority levels in the hardware scheduler. We identify the conditions under which each mechanism improves GPU kernel performance and implement a post-compilation binary optimizer that places these marks directly in compiled binaries without modifying source code or the compiler. Evaluated across six GPUs spanning four architectures, our optimizations speed up representative kernels by up to 31.9%, and the optimizer accelerates production kernels in llama.cpp and vLLM by up to 5.4% and end-to-end LLM inference by up to 3.6%.

0.14

Portability of Fortran's 'do concurrent' on GPUs II

cs.PL astro-ph.IMastro-ph.SRcs.CE+1 ·2026-08-20 ·Ronald M. Caplan, Miko M. Stulajter, Jon A. Linker, Jeff Larkin, Nikolaos Tselepidis +4 more
similarity 0.69
Abstract · 12 pages, 6 figures

There continues to be growing interest in using standard language constructs for parallel and accelerated HPC computing, avoiding the need for (sometimes vendor-specific) external APIs. For Fortran applications, language features such as 'do concurrent' loops open the door for compilers to implement multi-threaded, GPU-accelerated, and even distributed multi-node code with only the standard language. Here, we explore the current status of using 'do concurrent' for GPU-accelerated Fortran applications across three major GPU vendors (NVIDIA, AMD, and Intel). Using a production application, we test their current capabilities, showing where the standard language alone can be used, and where augmenting the code with a directive-based API (e.g., OpenMP) is still desirable or required. Multi-GPU tests are performed with GPU-aware MPI libraries. We find that the three GPU vendors can now GPU-accelerate pure Fortran (zero directives), but that manual data movement directives can help with performance and compatibility. The results show that there is rapid advancement towards making GPU-accelerated scientific HPC code performance portable using the Fortran standard language.

0.09

FlashGPU-sim: Enabling GPU Modeling for Modern Architectures and AI Workloads

cs.AR cs.DC ·2026-09-14 ·Siying Yu, Yixun Hong, Guozhi Qiu, Jingci Liu, Feng Gu +4 more
top venuecode/data similarity 0.68
Abstract · To appear in MICRO 2026

As AI becomes increasingly ubiquitous, modern AI systems are shaped by a tight software-hardware co-design loop. Later GPUs expose features such as asynchronous data movement, tensor core pipelines, and fine-grained synchronization that high-performance kernels aggressively exploit, while emerging application behaviors increasingly influence the next generation of hardware design. Unfortunately, the latest open-source simulators for NVIDIA GPUs focus on architectures and software stacks from roughly six years ago. Therefore, they cannot support many state-of-the-art AI kernels generated by modern compiler stacks, e.g. Triton, or accurately model the hardware features they depend on. As a result, architects lack a credible platform for analyzing bottlenecks in this flywheel or evaluating design trade-offs for future AI systems. To bridge this gap, we present FlashGPU-sim, an open-source, execution-driven, cycle-accurate GPU simulator for modern AI workloads. FlashGPU-sim faithfully models modern hardware features such as asynchronous data movement, fine-grained synchronization, tensor-core execution, and distributed shared memory. A Triton extraction front-end allows direct simulation of optimized AI operators without manual porting, while multi-threaded execution makes large-scale software-hardware co-design practical. Across 131 workload configurations on RTX 5090, H100, and B200, FlashGPU-sim achieves a cycle-level MAPE of 5.24%, while multi-threaded simulation reaches a 7.86x speedup with 16 host threads. An H100 case study further demonstrates its utility for microarchitectural design exploration.

0.44

Berth: SLO-Preserving GPU Sharing Without New Preemption

cs.DC ·2026-11-18 ·Mohammadali Khodabandehlou, Mahdi Alizadeh, Lei Gao, Murali Annavaram, Bhaskar Krishnamachari
similarity 0.68
Abstract · 16 pages, 15 figures

Inference services keep GPUs reserved for their worst-case load, and most of that capacity sits idle. Filling it with best-effort work such as training is the obvious remedy, and latency is why it rarely happens: on a shared GPU, a request that must finish within milliseconds finds the best-effort job's kernels running or queued ahead of it. Spatial sharing cannot evict them, temporal sharing gives the request only its turn, and hardware partitioning protects it by idling what it does not use. Systems that keep both the SLO and the utilization have reached inside the stack (rewriting kernels, patching the driver, instrumenting the framework), which the operator of a closed GPU stack cannot do. This paper argues that reaching inside is unnecessary. The time-slicer built into commodity GPUs already preempts a running kernel within a fraction of a millisecond and switches the moment a context runs out of work; what it lacks is priority, and priority can be created from outside by controlling what the best-effort context has to run. Berth is a user-space system built on this observation: a preloaded shim feeds the best-effort job to the GPU only when no request needs it (feed control), a declared deadline reference extends the rule to continuous-batching LLM engines, and a shortened best-effort time slice, set without privileges, bounds what a long kernel can cost. Berth changes no application, framework, kernel or driver. Across 31 scenario points with MLPerf SLOs and 13 baselines, Berth meets SLOs within a few percentage points of running alone, above every baseline, with 2.7-3.5x the best-effort throughput of the strongest ones; beside LLM serving, it meets per-token targets for nearly every request while training keeps running. Sharing a closed GPU under SLOs needs no new preemption mechanism, only control over what the existing one sees.

0.22

SIMTurn: Lightweight Divergent Subgroup Scheduling for Intra-Warp Synchronization

cs.AR cs.DCcs.PL ·2026-11-13 ·Nikhil Rout, Joe Samuel Rosh, Blaise Tine
code/data similarity 0.67
Abstract · 13 pages, 12 figures, 2 tables

Stack-based reconvergence enables efficient SIMT execution with a shared warp program counter and compact control-flow state. However, its fixed serialization of divergent paths can deadlock programs that rely on intra-warp synchronization: a spinning subgroup may prevent a resource-holding sibling from executing. Independent Thread Scheduling (ITS) enables finer-grained progress through per-thread execution state, but introduces additional hardware cost. We present SIMTurn, a lightweight compiler-hardware mechanism that enables forward progress among divergent subgroups while retaining stack-based reconvergence. SIMTurn combines a compiler-inserted yield instruction at potentially blocking loops with a bounded pool of resumable subgroups. The scheduler allows a waiting subgroup to yield to a sibling that can make progress, without requiring independent program counters for every thread. We implement SIMTurn in the compiler, simulator, and RTL on the open-source Vortex GPGPU and evaluate it against baseline IPDOM and per-thread ITS schemes. Across the evaluated GPU thread configurations, SIMTurn introduces only 17-24% scheduler-area overhead relative to IPDOM, compared with 39-91% for ITS, and stays within 8% of IPDOM on workloads that never need cross-subgroup progress. On kernels with genuine cross-subgroup parallelism, SIMTurn tracks ITS closely and is up to 2.7x faster than a software-serialized IPDOM baseline.

0.31

Hand-Written PTX Tensor-Core GEMM Kernels: A Multi-Precision Study on NVIDIA L4

cs.DC cs.AI ·2026-08-10 ·Matt J. Borowski, Blazej Osinski
code/data similarity 0.67
Abstract · 10 pages, 6 figures, 12 tables. Code and profiling data: https://github.com/MattJBorowski1991/TensorCorePTX (archived: https://doi.org/10.52…

High-performance Tensor Core kernels rely on a low-level PTX pipeline built from asynchronous data movement with cp.async, warp-level matrix loads with ldmatrix, and matrix multiply-accumulate operations with mma.sync. However, most application code accesses Tensor Cores indirectly through the WMMA C++ API. This paper asks a focused, practical question: when does replacing WMMA with hand-written PTX actually pay off? To answer this question, we conduct a controlled, single-GPU study on an NVIDIA L4 GPU (Ada, SM89), comparing double-buffered WMMA baselines with a family of hand-written PTX GEMM kernels across FP16, INT8, and INT4 arithmetic and square problem sizes from $N=512$ to $N=8192$. Every kernel is profiled with Nsight Compute across the full metric set, and PTX speedups are reported relative to the corresponding same-precision WMMA baseline. Hand-written PTX provides no end-to-end speedup for FP16, because its instruction-level gains are offset by operand-packing overhead. In contrast, the PTX kernels achieve consistent speedups of 1.4x-1.8x for INT8, driven primarily by lower instruction counts and better global-memory coalescing, and 2.9x-4.3x for INT4, where native mma.sync.m16n8k64.s4 execution avoids the software-emulated sequence used by the WMMA path. Relative to the FP16 WMMA baseline, the best quantized kernels reach 34.4x (INT8) and 98.7x (INT4) at $N=8192$. Across these experiments, occupancy is a poor predictor of throughput. For large matrices, performance instead tracks memory-system behavior -- particularly global-load coalescing and DRAM-active cycles -- more closely than Tensor Core utilization. These results identify the precisions and operating regimes in which the additional complexity of hand-written PTX is justified.

0.30

GPU implementation of a resource-constrained virtual machine

cs.DC cs.GR ·2026-08-17 ·Simone Li, Vladislav Brusokas, Andrei Ghita, Shuxuan Li, Wim Vanderbauwhede
benchmark similarity 0.67
Abstract · 5 pages, 5 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

One of the main reasons compute hardware becomes obsolete is software bloat: resource requirements increase for every iteration of a software product. Resource constrained VMs are one way to combat software bloat as they post a hard limit on the resources and so force the programmer to be frugal. In this paper we explore the deployment of one such resource constrained VM, Uxn, on GPU. We show that for competitive performance it is essential to make use of the GPU data parallelism. We present an OpenMP-style parallelism API for Uxntal, the stack-based assembly-style language for the Uxn platform. We demonstrate that exemplar code using our API can run at comparable performance even on an integrated GPU. Specifically, our evaluation results show that using this approach improves performance on the compute-intensive Stencil benchmark with 19x and frame rate on the graphics-intensive Bunnymark benchmark with 7x. In practice, all laptops and desktops and even mobile devices have a GPU and our work shows that they can be used to execute frugal workloads effectively.

0.25