CS Paper Radar

How Good Are Time-Series Foundation Models for Pedestrian Crowd Count Forecasting? A Cross-Dataset Comparative Study

Theivaprakasham Hari, Ziteng Li, Yanan Xin, Winnie Daamen, Serge Hoogendoorn

cs.LG cs.AI ·submitted 2026-09-14 22:46 UTC · v1
benchmark

Abstract

Pedestrian-count forecasting supports pedestrian-oriented Intelligent Transportation Systems (ITS), including crowd monitoring, pedestrian-traffic staffing and routing, and proactive risk mitigation during surges. Recent time-series foundation models (FMs) report strong zero-shot accuracy on heterogeneous forecasting benchmarks, but it remains unclear whether these gains transfer reliably to pedestrian sensing deployments. We benchmark seven univariate forecasting approaches spanning four paradigms: Seasonal Naive, gradient-boosted trees (LightGBM, CatBoost), deep learning models (N-HiTS, PatchTST), and two pretrained FMs (TimesFM, Chronos-2). Experiments cover two complementary regimes: (i) a five-day special event dataset SAIL2025 at 3-minute resolution with limited in-domain history; and (ii) Melbourne pedestrian sensors as a multi-year hourly dataset (2010--2017) with strong seasonality. We compare the MAE and RMSE results per sensor across datasets and multiple forecast horizons. Results show three consistent findings. First, with limited historical data, Seasonal Naive remains a strong baseline for long-horizon forecasting on high-volume sensors, while trained models can degrade when the next day differs substantially from prior days. Second, boosted trees can be competitive on lower-volume sensors but exhibit higher sensitivity on high-volume sensors under event-driven shift. Third, FMs excel in the seasonal and data-rich regime under long-context configuration. The findings highlight the importance of choosing pedestrian forecasting models based on both the underlying data conditions and the forecasting horizon.

Comment
9 pages, 3 Figures, submitted to The IEEE International Conference on Intelligent Transportation Systems (IEEE ITSC 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Estimating Pedestrian Volumes from GIS-Derived Built-Environment Features: A Machine Learning Framework

cs.LG ·2026-09-10 ·Bahareh Golchin, Banafsheh Rekabdar, Sirisha Kothuri, Joseph Broach
code/data similarity 0.69
Abstract

Transportation agencies need pedestrian volume estimates across entire road networks to prioritize safety investments, yet manual counts are expensive and cover only a small share of intersections. We present a machine learning pipeline that predicts 2-hour PM peak pedestrian volume at 101 urban intersections in Portland, Oregon, from built-environment, land-use, and street-network features drawn from open GIS data. Starting from the Negative Binomial GLM used in practice, we add feature selection, count-aware gradient boosting, and repeated cross-validation, selecting one configuration by a combined rank over RMSE, MAPE, and SMAPE across four cross-validation strategies. The winner, a histogram-based gradient boosting model with Poisson loss and L1 Lasso feature selection, reduces cross-validated RMSE by 12% over the GLM baseline (89.8 to 78.7) and holdout RMSE by 19% (108.0 to 87.9). Code is released on GitHub.

0.40

NightSteps: A Night-Time Dataset and Benchmark for Pedestrian Crossing Intention Prediction

cs.CV ·2026-11-08 ·Sjoerd Takken, Shaodi You
benchmark similarity 0.66
Abstract

Autonomous vehicles use pedestrian crossing intention prediction (PCIP) to participate safely in traffic. Existing models are largely trained under favourable daytime conditions with sufficient daylight. Little is known about the robustness of these models under night-time and low-light conditions, due to the lack of datasets containing night-time footage. This paper investigates how a dataset, named NightSteps, can be constructed and evaluated as a baseline benchmark. The dataset is based on nighttime dashcam footage collected from six different cities around the world, capturing a wide variety of road conditions. The dataset consists of dashcam-recorded point-of-view footage, raw data of pedestrians' locations with corresponding 'track ids' and ground-truth labels containing accurate information about pedestrian crossing behaviour, resulting in a diverse dataset. Gemini, ChatGPT, and human assessment are used to demonstrate the usability of the dataset by predicting crossings in clips from the dataset and comparing the results with the initial ground-truth labels. These results show that human input achieves an accuracy of 88.17% and an F1-score of 80.21%. Predictions from Gemini and ChatGPT perform lower, with accuracies of 60% and 79.13% respectively, and F1-scores of 42.50% and 63.64%. The evaluation demonstrates that the NightSteps dataset can be used for future model evaluation to test the performance of PCIP, with the aim of improving road safety at night.

0.28

CrowdTraj: A Benchmark for Dense Crowd Trajectory Prediction in Realistic Crowded Environments

cs.CV ·2026-09-07 ·Antonius Bima Murti Wijaya, Paul Henderson, Marwa Mahmoud
benchmark similarity 0.63
Abstract

In real-world applications, pedestrian trajectory prediction models rely on inputs from detection and tracking systems. Prior trajectory prediction benchmarks either contain relatively sparse pedestrian interactions, assume perfect tracking inputs, or rely on overhead viewpoints that minimize occlusion and perspective distortion, limiting evaluation in realistic dense-crowd scenarios. We present CrowdTraj, a benchmark for pedestrian trajectory prediction in natural dense crowd scenes. Unlike previous datasets, CrowdTraj supports end-to-end evaluation from detection through tracking to trajectory prediction under severe occlusion in CCTV views. It also captures diverse, natural pedestrian behaviours, including abrupt directional changes rarely observed in existing benchmarks. CrowdTraj includes five diverse scenes, with an average of 1,146 unique pedestrians per scene, maximum frame-level densities ranging from 114 to 372 pedestrians, and over 3.2 million annotated head bounding boxes. CrowdTraj provides pixel and real-world coordinates via per-scene homography matrices for physically meaningful analysis. Our experimental results show that tracking accuracy (IDF1) drops to 0.68 to 0.70 in the densest scenes, compared with approximately 0.90 in less crowded scenes. Trajectory prediction training also becomes substantially more computationally expensive in dense scenes, with training times increasing by up to 8 times. These findings show that CrowdTraj exposes limitations in current trajectory prediction pipelines that remain hidden on existing sparse-crowd benchmarks, particularly in robustness to tracking noise and computational scalability.

0.30

Probabilistic Pedestrian Forecasts from a Handheld Phone: World-Frame Heat Maps, Visual-Inertial Height Drift, and Evaluation without Ground Truth

cs.CV cs.RO ·2026-10-03 ·Danial Safaei
benchmark similarity 0.63
Abstract · 28 pages, 7 figures, 16 tables

A pedestrian with a phone could be shown where nearby people will be in the next few seconds, if the forecast stays on the ground while the phone moves, is calibrated, and needs only a monocular camera and visual-inertial odometry (VIO). We build and evaluate such a system. People are detected, lifted onto the floor by ray-plane intersection, tracked in a gravity-aligned metric frame, and forecast as per-step probability maps by a small U-Net trained with a negative log-likelihood (NLL) loss on bird's-eye (SDD) and first-person (EgoTraj-Bench) trajectories. On handheld ADVIO recordings, vertical VIO drift and the user's own changes of level silently rescale monocular ground positions (by 87% within 90 s on one clip; on another, all tracks are lost for the last 31% of the clip); keeping the camera's height above the floor constant under a low-pass-filtered altitude avoids this, though it lags on escalators. On the SDD and EgoTraj-Bench test splits, the final forecaster lowers the NLL at 4.8 s by 1.51 and 1.37 nats relative to a fitted constant-velocity Gaussian. Lacking ground truth for people in handheld video, we score forecasts against the tracker's own later raw measurements. In an internally pre-registered evaluation on seven held-out clips, the final forecaster's NLL is lower than the benchmark-fitted baseline's at 1.2, 2.4 and 4.8 s (by 0.17, 0.23 and 0.47 nats; 95% intervals over people exclude zero), but by less than half as much as on the development clips. Exploratory analyses cut both ways: resampling clips instead of people widens the intervals to include zero at 1.2 and 2.4 s, and once both forecasters are recalibrated on the development clips the network is significantly better only at 1.2 s; but two clips run with ADVIO's reference poses favour the network much more when re-run with the phone's own poses. We discuss what such self-consistency scores can and cannot show.

0.23

Safety-oriented pedestrian trajectory prediction at urban intersections using time-to-collision and crossing-zone context

cs.LG ·2026-08-31 ·Erel Avineri, Yftach Gil, Yehudit Aperstein
similarity 0.62
Abstract · 22 pages, 7 figures

Accurate pedestrian trajectory prediction is important for proactive road-safety applications, particularly at urban intersections where pedestrian motion is shaped by both vehicle interactions and crossing context. This study presents a safety-oriented trajectory-prediction framework that combines pedestrian motion history with Time-to-Collision (TTC) information and crossing-zone indicators. Using naturalistic trajectories from one urban intersection in the inD (Intersection Drone) dataset, several neural architectures were evaluated with 1.6 s observation and 2.4 s prediction horizons. A pooled Long Short-Term Memory (LSTM) separately encodes TTC histories and crossing-zone context before integrating them with pedestrian positions. In addition to conventional Average Displacement Error (ADE) and Final Displacement Error (FDE), prediction performance was assessed using the frequency and magnitude of errors exceeding a study-defined 1 m tolerance. A weighted loss was also introduced to place greater training emphasis on large coordinate-wise errors. Applying this loss to the position-only LSTM reduced ADE from 0.210 to 0.190 m and FDE from 0.550 to 0.503 m, while reducing ADE and FDE exceedance counts by 34.8% and 19.8%, respectively. The final pooled configuration incorporating TTC and crossing-zone information achieved an ADE of 0.184 m and FDE of 0.491 m, with further reductions of 33.5% and 6.3% in ADE and FDE exceedance counts relative to the safety-oriented position-only LSTM. The results indicate that safety-oriented training and structured integration of interaction and contextual information can reduce large trajectory-prediction errors, although broader validation across pedestrians, sites, and datasets is required.

0.23

SeoulMMOD: A Large-Scale Multimodal Origin-Destination Flow Benchmark

cs.LG ·2026-10-09 ·Taeyoung Yu, Seonbin Jo, Jiwon Kim, Junyoung Byun
benchmark similarity 0.62
Abstract

Origin-destination (OD) flow forecasting supports urban mobility decisions by predicting the volume and patterns of human movement across a city. Most existing public OD benchmarks provide only a partial view of citywide mobility, covering a single transport service or at most two modes. With partial mode coverage, observed demand changes are difficult to separate into shifts across transport modes and changes in total travel. We introduce SeoulMMOD, a large-scale public benchmark for citywide multimodal mobility in Seoul. SeoulMMOD provides three years of hourly OD flows estimating total mobility for 6 urban travel modes across 25 districts and 426 sub-districts, together with travel-time, travel-distance, calendar, rainfall, and point-of-interest (POI) signals. Using SeoulMMOD, we benchmark 14 forecasting baselines under a common protocol and analyse the effects of spatial scaling, joint versus mode-separate training, and cross-year generalization. Results show that several spatio-temporal models that work at district level do not scale to sub-district OD forecasting, and that naive joint multi-mode training does not consistently improve accuracy. Together, the dataset and benchmark establish a reproducible testbed for multi-mode, multi-year OD forecasting at the city scale.

0.04

Generalize Then Personalize: Wearable-Based Heart Rate Forecasting Under Scarce Ruck-March Data

cs.LG ·2026-11-10 ·Muntaqim Ahmed Raju, Ruizhe Ma, John W. Ramsay, David J. Cornell
benchmark similarity 0.61
Abstract · IEEE BIBM 2026

Heart rate (HR) forecasting may provide advance information about near-future cardiovascular response, potentially supporting physiological monitoring and workload-management decisions during ruck marching. However, robust model development is constrained by the difficulty of collecting large-scale ruck-march datasets, creating a scarce-data problem in which models must generalize across participants while adapting to individuals from limited personal data. To address this problem, we benchmark population-only training (POT), personalized-from-scratch training (PFST), and population-pretrained fine-tuning (PPFT) for HR forecasting during loaded ruck marching using data from eight active-duty U.S. Army medics across thirteen sessions. LSTM, Attention-LSTM, and CNN-LSTM backbones were evaluated against a persistence baseline at 30 s and 60 s horizons. Across all neural architectures and horizons, PPFT yielded lower mean MAE, RMSE, and endpoint MAE than both POT and PFST. Participant-level paired analysis after averaging across three training seeds showed that, relative to PFST, PPFT reduced trajectory MAE by 2.22-4.30 bpm and endpoint MAE by 1.24-2.88 bpm. All six trajectory-MAE comparisons remained significant after Holm adjustment ($p_{adj}$ = 0.0469), while four of six endpoint-MAE comparisons remained significant after adjustment. At 30 s, persistence achieved the lowest MAE (3.555 $\pm$ 1.274 bpm), while CNN-LSTM PPFT achieved the lowest RMSE (4.669 $\pm$ 1.916 bpm); LSTM PPFT achieved the lowest endpoint MAE (5.093 $\pm$ 2.365 bpm). At 60 s, Attention-LSTM PPFT achieved the lowest MAE (5.573 $\pm$ 1.939 bpm) and RMSE (7.134 $\pm$ 2.260 bpm), while CNN-LSTM PPFT achieved the lowest endpoint MAE (7.553 $\pm$ 2.357 bpm). These results suggest that population pretraining followed by participant-specific fine-tuning may provide a practical strategy for scarce-data wearable HR forecasting.

0.21

MoveBench: A Benchmark for Global-Scale Wildlife Movement Forecasting

cs.LG ·2026-09-14 ·Justin Kay, Shir Bar, Ellen O. Aikens, Martin Becker, Francesca Cagnacci +26 more
benchmark similarity 0.60
Abstract · Pre-release preprint

Understanding and predicting wildlife movement is critical for ecology and conservation. While trajectory forecasting has advanced for human and vehicle movement, wildlife trajectories present distinct challenges: they are unconstrained in space, highly stochastic, and influenced by environmental conditions. We introduce MoveBench, the first large-scale benchmark for probabilistic wildlife movement forecasting, containing 2.6M GPS locations from 800+ individuals across 110 species in 127 countries, paired with 1.6B environmental raster tiles capturing 160 covariates known or hypothesized to influence movement. We propose a probabilistic evaluation protocol for movement trajectory forecasts, addressing limitations of point-prediction metrics for inherently stochastic phenomena. Through comprehensive empirical evaluation of four method families across multiple temporal and spatial scales, we reveal that: (1) existing predictive methods generalize better to future timepoints than to unseen individuals, (2) deep learning approaches do not consistently outperform simpler baselines, and (3) environmental covariate selection significantly impacts performance. MoveBench enables standardized evaluation of movement forecasting methods and provides a foundation for methodological advances on this ecologically important task.

0.42