CS Paper Radar

Estimating Pedestrian Volumes from GIS-Derived Built-Environment Features: A Machine Learning Framework

Bahareh Golchin, Banafsheh Rekabdar, Sirisha Kothuri, Joseph Broach

cs.LG ·submitted 2026-09-10 20:06 UTC · v1
code/data

Abstract

Transportation agencies need pedestrian volume estimates across entire road networks to prioritize safety investments, yet manual counts are expensive and cover only a small share of intersections. We present a machine learning pipeline that predicts 2-hour PM peak pedestrian volume at 101 urban intersections in Portland, Oregon, from built-environment, land-use, and street-network features drawn from open GIS data. Starting from the Negative Binomial GLM used in practice, we add feature selection, count-aware gradient boosting, and repeated cross-validation, selecting one configuration by a combined rank over RMSE, MAPE, and SMAPE across four cross-validation strategies. The winner, a histogram-based gradient boosting model with Poisson loss and L1 Lasso feature selection, reduces cross-validated RMSE by 12% over the GLM baseline (89.8 to 78.7) and holdout RMSE by 19% (108.0 to 87.9). Code is released on GitHub.

Closest papers

Nearest neighbours by meaning across the whole index.

How Good Are Time-Series Foundation Models for Pedestrian Crowd Count Forecasting? A Cross-Dataset Comparative Study

cs.LG cs.AI ·2026-09-14 ·Theivaprakasham Hari, Ziteng Li, Yanan Xin, Winnie Daamen, Serge Hoogendoorn
benchmark similarity 0.69
Abstract · 9 pages, 3 Figures, submitted to The IEEE International Conference on Intelligent Transportation Systems (IEEE ITSC 2026)

Pedestrian-count forecasting supports pedestrian-oriented Intelligent Transportation Systems (ITS), including crowd monitoring, pedestrian-traffic staffing and routing, and proactive risk mitigation during surges. Recent time-series foundation models (FMs) report strong zero-shot accuracy on heterogeneous forecasting benchmarks, but it remains unclear whether these gains transfer reliably to pedestrian sensing deployments. We benchmark seven univariate forecasting approaches spanning four paradigms: Seasonal Naive, gradient-boosted trees (LightGBM, CatBoost), deep learning models (N-HiTS, PatchTST), and two pretrained FMs (TimesFM, Chronos-2). Experiments cover two complementary regimes: (i) a five-day special event dataset SAIL2025 at 3-minute resolution with limited in-domain history; and (ii) Melbourne pedestrian sensors as a multi-year hourly dataset (2010--2017) with strong seasonality. We compare the MAE and RMSE results per sensor across datasets and multiple forecast horizons. Results show three consistent findings. First, with limited historical data, Seasonal Naive remains a strong baseline for long-horizon forecasting on high-volume sensors, while trained models can degrade when the next day differs substantially from prior days. Second, boosted trees can be competitive on lower-volume sensors but exhibit higher sensitivity on high-volume sensors under event-driven shift. Third, FMs excel in the seasonal and data-rich regime under long-context configuration. The findings highlight the importance of choosing pedestrian forecasting models based on both the underlying data conditions and the forecasting horizon.

0.15

Edge-Assisted Crowdsensing for Explainable Cyclist Safety Perception

cs.CV eess.IV ·2026-11-05 ·Hongsen Cao, Chia-Yen Chiang, Mona Jaber, Meihui Wang, Yasmin Fathy
hot direction similarity 0.66
Abstract

Cyclist fatality rates remain high despite policy support for active travel, and autonomous vehicles add complexity to mixed traffic. Neither crash statistics nor multi-model detection pipelines scale to continuous monitoring of perceived safety along a route. We present an edge-assisted crowdsensing system: handlebar cameras supply street-level frames, a vision-language model (VLM) turns each frame into structured traffic attributes through a single prompt, and an explainable boosting machine (EBM) combines them with OpenStreetMap road infrastructure and on-bike kinematics to predict a crowdsourced 1-9 safety score. Extraction belongs at the network edge: the fastest self-hosted model needs 2.49 s per frame and scoring takes 0.4 ms on a CPU. On 1,362 annotated frames from two London routes, the EBM regressor reaches 72.2 percent binary accuracy and a mean absolute error of 1.011 under five-fold cross-validation. It is within one accuracy point of black-box ensembles. Its per-feature shape functions give exact attribution: physical lane separation is worth +0.97 rating points, a painted lane +0.70 and a construction site -0.65. Planners can therefore price an infrastructure change in rating points, and the results enter cost-benefit analysis directly. We also report inter-annotator agreement (alpha = 0.4695), an attribute audit, and a sensitivity analysis linking attribute error to accuracy. With re-encoding, a 20 s sampling interval serves 1,000 riders at 54 Mbit/s at a cost of 1.4 accuracy points, making continuous monitoring practical.

0.31

DensePed-Lite: Quality-Aware Adaptive Detection for Dense Pedestrians under Occlusion

cs.CV ·2026-09-30 ·ZiAn Wang, MingZhe Liu, Chaoyi Guo, ChangChun Li, Fangming Gu
published similarity 0.62
Abstract · Accepted at WISE 2026

Pedestrian detection plays a crucial role in computer vision with applications in autonomous driving, surveillance, and public safety. However, real-world dense scenes bring severe challenges, including heavy occlusion, drastic scale variations, and strict real-time requirements. Existing lightweight detectors struggle to balance accuracy and efficiency while often neglecting quality-aware feature modeling and consistency between classification and localization, leading to unstable performance under crowded conditions. To address these issues, we propose DensePed-Lite, a unified framework built on a single principle: under occlusion the network should adapt its behavior to the quality of what it observes rather than assume complete information. This principle is realized at three points where occlusion does the most damage: unreliable confidence scoring (UQE), fragmented spatial coverage (MPSC), and incoherent multi-scale fusion (CTDM). The three mechanisms reinforce one another instead of acting in isolation, all without significantly increasing complexity. Experiments on CityPersons and CrowdHuman validate that DensePed-Lite achieves a superior accuracy-efficiency trade-off compared with recent state-of-the-art lightweight methods, making it suitable for real-time deployment in dense pedestrian scenarios.

0.21

NightSteps: A Night-Time Dataset and Benchmark for Pedestrian Crossing Intention Prediction

cs.CV ·2026-11-08 ·Sjoerd Takken, Shaodi You
benchmark similarity 0.60
Abstract

Autonomous vehicles use pedestrian crossing intention prediction (PCIP) to participate safely in traffic. Existing models are largely trained under favourable daytime conditions with sufficient daylight. Little is known about the robustness of these models under night-time and low-light conditions, due to the lack of datasets containing night-time footage. This paper investigates how a dataset, named NightSteps, can be constructed and evaluated as a baseline benchmark. The dataset is based on nighttime dashcam footage collected from six different cities around the world, capturing a wide variety of road conditions. The dataset consists of dashcam-recorded point-of-view footage, raw data of pedestrians' locations with corresponding 'track ids' and ground-truth labels containing accurate information about pedestrian crossing behaviour, resulting in a diverse dataset. Gemini, ChatGPT, and human assessment are used to demonstrate the usability of the dataset by predicting crossings in clips from the dataset and comparing the results with the initial ground-truth labels. These results show that human input achieves an accuracy of 88.17% and an F1-score of 80.21%. Predictions from Gemini and ChatGPT perform lower, with accuracies of 60% and 79.13% respectively, and F1-scores of 42.50% and 63.64%. The evaluation demonstrates that the NightSteps dataset can be used for future model evaluation to test the performance of PCIP, with the aim of improving road safety at night.

0.28

Leveraging Remote Traffic Data for Local Air Pollutant Estimation: A Scenario-Based Machine Learning Study Across London Monitoring Sites

cs.LG ·2026-08-21 ·Valeria Legaria-Santiago, Amadeo Arguelles, Magdalena Saldana-Perez, Jocelyn Richardson, Marcella Bona
published similarity 0.59
Abstract · Accepted for publication in Atmosphere

Vehicular traffic is a major source of air pollution; however, the contribution of remotely acquired traffic information to local machine-learning (ML) air-pollution models remains insufficiently characterised. This study evaluates four interpretable tree-based ML models (Random Forest, Extra Trees, LightGBM, and XGBoost) under six predictor scenarios combining progressively larger predictor sets, ranging from remotely acquired traffic, meteorological, and temporal variables alone to the inclusion of measurements from one and four neighbouring monitoring stations, to estimate NO$_2$, PM$_{10}$, PM$_{2.5}$, and O$_3$ concentrations across several sites in London. ML model performance was compared with a ridge linear regression model as a baseline, with spatial interpolation methods and with a cross-site validation experiment. When modelling without data from neighbouring stations, the RMSE for NO$_2$ ranged from 9.73 to 11.66 $μ$g/m$^3$ without traffic information, compared with 8.72 to 11.52 $μ$g/m$^3$ when traffic information was included. Additionally, for NO$_2$, SHAP analyses indicate that traffic-related variables can contribute at levels comparable to pollutant measurements from neighbouring monitoring stations in traffic-dominated~environments.

0.33

ROD-Dataset: A Pedestrian-Perspective Benchmark of Urban Obstacle Classes for YOLO-Based Detection

cs.CV cs.CY ·2026-10-31 ·Abtin Zandi, Ariyan Azami, Bardia Sabagh Kermani, Parsa Abbasian, Roza Ganjipour +2 more
benchmark similarity 0.59
Abstract

Two groups of pedestrians face avoidable risk on the city sidewalk: people living with visual impairment, who reach an obstacle before anything warns them, and people walking with divided attention, who register a hazard late or not at all. A vision system can warn them only about obstacles it has learned to recognize, so its training data limits the protection it offers. No suitable training set exists: public benchmarks are recorded from vehicles, aerial platforms, or fixed rigs, general-purpose detectors omit the street furniture that causes trips, and pedestrian-focused collections are confined to single regions with incompatible class schemes. This paper introduces the Real-time Obstacle Detection (ROD) dataset: more than 24,000 images and 40,000 annotated obstacles across 25 classes, from vehicles and people to the stairs, manholes, traffic cones, and benches that general-purpose detectors overlook. Because street furniture differs between cities, ROD unifies twenty-nine public collections onto one taxonomy and adds eye-level imagery from two contrasting cities on two continents, Tehran and Toronto. Every label is human-verified, and each capture campaign is admitted only after a compact detector shows it can learn the class. Six lightweight YOLO detectors (nano and tiny variants) benchmarked on ROD all exceed 0.86 recall; YOLO12n attains the highest recall (0.889), YOLO26n the highest precision (0.925), and YOLOv9t the best mAP@0.50 (0.882) with the fewest parameters. Because the recall and mAP rankings disagree, selecting a model by mAP does not minimize missed obstacles, so per-class recall is reported for all 25 classes.

0.13

DRAFE: Domain-Robust Asymmetric Fusion of Heterogeneous Detection Transformers for Cross-City Fine-Grained Traffic Object Detection

cs.CV ·2026-08-17 ·Divine Yao Agbobli, Geoffery Eyram Agorku, Israel Afriyie, Kwadwo Amankwah-Nkyi, Marvin Osei-Kuffour +4 more
benchmarkcode/data similarity 0.58
Abstract · 17 pages, 2 figures, 6 tables. Code available at: https://github.com/dyagbobli/VisionOps-Trainer

Deep learning-based object detectors are fundamental to intelligent transportation systems, enabling traffic monitoring, vehicle analytics, and infrastructure management. However, achieving both fine-grained vehicle recognition and robust cross-city domain generalization remains challenging. We present the Domain-Robust Asymmetric Fusion Ensemble (DRAFE), which combines independently trained LW-DETR and RF-DETR detectors for cross-city fine-grained traffic object detection. DRAFE employs a two-stage training strategy that first pretrains complementary detectors on diverse public traffic datasets using pseudo-label expansion and human-in-the-loop annotation refinement, producing a curated corpus of 6,049 images and 203,619 annotations, before challenge-compliant fine-tuning on the Project Hafnia Track 6 dataset. At inference, DRAFE applies anchor-conditioned class-consistent matching, reliability-weighted coordinate fusion, agreement-aware confidence recalibration, and complementary hypothesis recovery. On AI City Challenge 2026 Track 6, DRAFE achieves 0.4022 mAP, ranks sixth among 25 participating teams, and improves by 0.0553 mAP over a preliminary ensemble evaluated under identical benchmark conditions.

0.49

The 10th AI City Challenge

cs.CV cs.AI ·2026-08-17 ·Zheng Tang, Shuo Wang, David C. Anastasiu, Ming-Ching Chang, Anuj Sharma +32 more
publishedbenchmarkhighly cited similarity 0.58
Abstract · Summary of the 10th AI City Challenge Workshop in conjunction with ECCV 2026

The 10th AI City Challenge, held with ECCV 2026, marks a decade of community benchmarking for intelligent transportation, smart cities, and physical AI. Since its 2017 start with vehicle detection, classification, and tracking, the challenge has grown into a broad benchmark suite for multi-camera perception, multimodal reasoning, synthetic-to-real learning, generative forecasting, and privacy-preserving evaluation. The 2026 edition continued this growth with 325 registered teams, up from 245 in 2025, and participation from 26 countries and regions, up from 15. Its six primary tracks cover multi-camera 3D perception, transportation safety captioning and VQA, traffic anomaly reasoning, text-based person anomaly search, generative traffic video forecasting, and cross-city object detection. Track 3 further includes two out-of-domain leaderboards, submitted as Tracks 7 and 8, for fisheye traffic-violation understanding and pedestrian situated-intent VQA. This paper summarizes the challenge setup, datasets, evaluation protocols, leaderboard results, and workshop papers. Across tracks, successful systems combine foundation models with geometric grounding, retrieval or reranking, synthetic-data design, domain adaptation, and controlled inference.

0.42