CS Paper Radar

A Mechanical Antenna for Improving Capacity Fairness in Dynamic Multi-Station Scenarios

Akihito Taya, Yuuki Nishiyama, Kaoru Sezaki

cs.NI eess.SY ·submitted 2026-09-15 09:07 UTC · v1
published

Abstract

While indoor Internet of Things (IoT) and sensor networks increasingly rely on Wi-Fi access points (APs) to collect high-bandwidth data streams from multiple devices, conventional APs rely on static antenna deployments, whose fixed orientations are often suboptimal in dynamic propagation environments. To overcome this limitation, this paper proposes a mechanical Wi-Fi antenna control system that adaptively optimizes its 3D antenna orientation for dynamic multi-station scenarios. The proposed system autonomously actuates its physical antennas in response to perceived radio environments by combining state-specific black-box optimizers and capacity-based environment change detection. The evaluation results show that the proposed system improves channel capacity under dynamic station combinations, avoids unnecessary re-optimization under transient blockages, and triggers re-optimization after sustained environmental changes such as continuous blockage and device relocation.

Comment
Accepted to IEEE GLOBECOM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Model Sharing Bayesian Optimization for Mechanical Wi-Fi Antenna Control in Multi-Station Environments

cs.NI ·2026-10-30 ·Akihito Taya, Yuuki Nishiyama, Kaoru Sezaki
similarity 0.64
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice

Some commercial Wi-Fi access points used in homes and offices have antennas whose orientations can be adjusted manually. However, selecting suitable orientations is difficult for non-expert users, particularly in indoor multipath environments where reflections and polarization effects complicate the relationship between antenna orientation and link quality. We investigate automatic mechanical antenna orientation control for uplink Wi-Fi communication when the set of active stations changes over time. Building on our previously developed antenna-control system, we propose a model-sharing Bayesian optimization (BO) framework that learns the log-capacity of each link using a separate Gaussian process regression (GPR) model. The framework reuses these models across active-station (STA) combinations and optimizes proportional fairness, equivalently maximizing the geometric mean of the active links' capacities. Exploiting the linearity of this objective in log-capacity, we also derive a upper confidence bound (UCB) acquisition function and its gradient. We evaluate the framework through simulations driven by measured channel capacities and experiments with a mechanical Wi-Fi antenna prototype. The results demonstrate that the proposed model-sharing BO achieves better optimization performance than independent state-specific optimization by reusing the models trained on previously observed links.

0.25

Enhancing IoT Network Reliability through Antenna Diversity in Real-World Scenarios

cs.NI eess.SP ·2026-10-21 ·Marco Niederberger, Yanick Schoch, Michel A. Nyffenegger, Christian Gwerder, Hans-Dieter Lang
publishedunusual similarity 0.54
Abstract · 5 pages, 8 figures, 1 table

Antenna diversity in Internet of Things (IoT) devices is explored to address challenges associated with fixed device orientation and interference from nearby metallic objects, which can degrade wireless network performance. Integrating multiple antennas with different polarizations can significantly enhance signal quality and network reliability. Experiments demonstrated significant improvements in link quality, with gains exceeding 30 dB in received signal strength for specific scenarios. Already the addition of a second PCB-based antenna alone, resulted in a 17 dB improvement. These findings suggest that the added complexity in hardware and software to incorporate antenna diversity could well be justified by the resulting enhancements in network stability for real-world applications.

0.67

Pinching-Antenna Systems: From Antenna Placement to Antenna Roaming

eess.SP ·2026-08-10 ·Kaidi Wang, Daniel K. C. So, Zhiguo Ding
similarity 0.54
Abstract

This paper investigates pinching-antenna systems with finite antenna movement speed, under which conventional antenna placement is subject to non-negligible repositioning delay, resulting in a fundamental tradeoff between channel quality and effective transmission time. In this context, antenna roaming is proposed as a novel operation mode, in which the antenna moves continuously along the waveguide while simultaneously serving users. By incorporating communication and antenna movement into the same transmission cycle, a unified cycle-duration framework is established to facilitate a fair comparison between antenna placement and antenna roaming. The sum-rate difference is then analytically derived, indicating that antenna roaming avoids dedicated positioning overhead with a loss in channel quality due to spatial averaging. The corresponding sum rate maximization problems are formulated for the two operation modes. The continuous optimization problems are transformed into finite-state sequential decision problems and solved via dynamic programming (DP) based algorithms. For antenna roaming, the optimal unconstrained service-interval partition is analytically characterized, with each antenna position assigned to the user achieving the highest instantaneous rate. Simulation results validate the theoretical analysis, demonstrate the performance advantage of antenna roaming over antenna placement, especially when positioning overhead is significant, and confirm the effectiveness of the DP based solutions in improving the achievable sum rate.

0.41

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.52
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.16

World Model for Energy Efficiency Maximization in Dynamic Metasurface Antennas

cs.IT eess.SY ·2026-10-26 ·Abdolrasoul Sakhaei Gharagezlou, Mehdi Monemi, Matti Latva-aho, Mehdi Rasti
similarity 0.51
Abstract

Dynamic metasurface antennas (DMAs) have emerged as a promising technology for realizing large-scale antenna arrays in next-generation wireless networks owing to their ability to enable dense and energy-efficient antenna architectures. However, jointly optimizing digital beamforming and DMA element weights under time-varying channel conditions remains challenging due to their coupled effects on the received signal and interference powers. We formulate this problem to maximize time-averaged energy efficiency (EE) under time-varying channel conditions, subject to transmit power constraints, Lorentzian phase limitations, and minimum rate requirements. To enable long-term planning and improve sample efficiency compared with model-free reinforcement learning, we develop a world model framework that learns latent system dynamics from interactions with the environment and jointly optimizes digital beamforming and DMA element weights through imagined trajectories. Furthermore, we incorporate feasibility-preserving action mappings and safety cost signals to ensure constraint satisfaction during policy learning. Simulation results demonstrate that the proposed framework improves the time-averaged EE by approximately 20% compared with the deep Q-network baseline, while achieving higher sample efficiency and more reliable constraint satisfaction.

0.31

Pinching Antennas for Next-Generation Wireless Communications: A Network Perspective

eess.SP ·2026-09-15 ·Yanqing Xu, Shan Shan, Yongxu Zhu, Zhiguo Ding, Mugen Peng +1 more
similarity 0.50
Abstract

Pinching antennas enable radiation points to be created and reconfigured along extended waveguides, making the physical locations of wireless transmission and reception controllable after infrastructure deployment. This capability introduces a spatial degree of freedom beyond conventional beamforming and resource allocation, with implications that extend from individual links to network-wide operation. This tutorial develops a network-oriented perspective on pinching-antenna systems. We first review their system architecture, channel characteristics, and fundamental design opportunities. We then examine how radiation-location reconfigurability can support environment-division multiple access by strengthening desired links and suppressing cross-links, and discuss its roles in multi-cell transmission, traffic offloading, and inter-cell cooperation. Moving from instantaneous users to entire service regions, we introduce traffic-aware and geometry-aware designs under a cell-free-inspired multi-waveguide architecture. Representative system models, optimization problems, analytical illustrations, and numerical results are provided to explain the main design tradeoffs and network-level insights. We further discuss generalized physical realizations and representative deployment modes, including standalone, conventional base-station-integrated, and distributed deployments, together with their main implementation considerations. Finally, we identify future research directions involving mobility management, programmable and virtualized radio access, environment knowledge acquisition, AI-native control, low-altitude networks, space-air-ground integration, and integrated sensing and communication. Overall, this tutorial presents radiation locations as configurable network resources and provides a framework for understanding how pinching antennas may reshape future wireless network.

0.50

Reconfigurable Antenna-Enhanced ISAC: A Unified Perspective on Electromagnetic Adaptation

eess.SP ·2026-11-03 ·Peilan Wang, Lei Xie, Weidong Mei, Jun Fang, Yihong Su +1 more
similarity 0.50
Abstract

Integrated sensing and communication (ISAC) enables sensing and communication (S&C) functions to share time, frequency, and hardware resources, offering an efficient paradigm for next-generation wireless systems. However, conventional fixed-configuration antenna (FCA) architectures provide limited flexibility in adapting the physical electromagnetic (EM) response of the end-to-end wireless link. This article develops a unified EM-adaptation perspective on reconfigurable antenna (RA)-enhanced ISAC systems. We distinguish transceiver-side (TSc-side) and environment-side (Env-side) RA deployments and identify five fundamental EM reconfiguration dimensions: position, orientation, radiation pattern, polarization, and frequency response. Building on this framework, we examine how these dimensions customize communication channels, actively control target information mapping for sensing, and reshape the interplay between S&C, particularly by improving compatibility between S&C requirements under shared resources. Two case studies illustrate how TSc-side and Env-side EM reconfiguration can improve spatial selectivity and the achievable S&C performance tradeoff. Finally, we discuss several promising directions for advancing RA-enhanced ISAC systems, including fundamental performance limits, low-overhead black-box optimization, and artificial intelligence (AI)-enabled semantic ISAC.

0.19

Learning-Accelerated Joint AP/RIS Optimization for Low-Latency Indoor mmWave XR Networks

cs.NI ·2026-10-24 ·Ali Elghariani, Mohammed Elbamby, Anis Elgabli
published similarity 0.50
Abstract · 6 pages, 6 figures, accepted for presentation in IEEE Globecom 2026

This paper studies a reconfigurable intelligent surface (RIS)-assisted indoor architecture for extended reality (XR) applications, where multiple access points (APs) simultaneously serve multiple users over a shared frequency channel under a centralized AP controller. We formulate a non-convex sum-rate maximization problem with coupled AP precoders and RIS phase shifts, and develop a centralized alternating optimization (AO) framework for joint design. We rigorously prove that the proposed AO guarantees monotonic improvement of the sum rate that converges to a coordinate-wise stationary point, despite the non-convexity of the resulting subproblems. Although AO provides reliable performance, its iterative nature limits real-time applicability as the system dimension grows. To overcome this limitation, we propose a supervised learning-assisted approach that leverages AO-generated solutions to significantly accelerate convergence. Simulation results demonstrate that the proposed framework achieves near-optimal performance with substantially fewer AO iterations, which makes it well-suited for latency-critical RIS-assisted XR deployments.

0.31