CS Paper Radar

Enhancing IoT Network Reliability through Antenna Diversity in Real-World Scenarios

Marco Niederberger, Yanick Schoch, Michel A. Nyffenegger, Christian Gwerder, Hans-Dieter Lang

cs.NI eess.SP ·submitted 2026-10-21 16:44 UTC · v1
publishedunusual

Abstract

Antenna diversity in Internet of Things (IoT) devices is explored to address challenges associated with fixed device orientation and interference from nearby metallic objects, which can degrade wireless network performance. Integrating multiple antennas with different polarizations can significantly enhance signal quality and network reliability. Experiments demonstrated significant improvements in link quality, with gains exceeding 30 dB in received signal strength for specific scenarios. Already the addition of a second PCB-based antenna alone, resulted in a 17 dB improvement. These findings suggest that the added complexity in hardware and software to incorporate antenna diversity could well be justified by the resulting enhancements in network stability for real-world applications.

Comment
5 pages, 8 figures, 1 table
Journal ref
2025 19th European Conference on Antennas and Propagation (EuCAP)
DOI
10.23919/EuCAP63536.2025.10999914

Closest papers

Nearest neighbours by meaning across the whole index.

A Mechanical Antenna for Improving Capacity Fairness in Dynamic Multi-Station Scenarios

cs.NI eess.SY ·2026-09-15 ·Akihito Taya, Yuuki Nishiyama, Kaoru Sezaki
published similarity 0.54
Abstract · Accepted to IEEE GLOBECOM 2026

While indoor Internet of Things (IoT) and sensor networks increasingly rely on Wi-Fi access points (APs) to collect high-bandwidth data streams from multiple devices, conventional APs rely on static antenna deployments, whose fixed orientations are often suboptimal in dynamic propagation environments. To overcome this limitation, this paper proposes a mechanical Wi-Fi antenna control system that adaptively optimizes its 3D antenna orientation for dynamic multi-station scenarios. The proposed system autonomously actuates its physical antennas in response to perceived radio environments by combining state-specific black-box optimizers and capacity-based environment change detection. The evaluation results show that the proposed system improves channel capacity under dynamic station combinations, avoids unnecessary re-optimization under transient blockages, and triggers re-optimization after sustained environmental changes such as continuous blockage and device relocation.

0.58

On-Off Digital Noise Modulation with Fluid Antenna Systems over $κ$-$μ$ Fading Channels

eess.SP ·2026-08-13 ·Daniel C. Araújo, André A. dos Anjos, Hugerles S. Silva, Constantinos Psomas, Robson D. Vieira
similarity 0.49
Abstract

This letter proposes the integration of on-off digital noise (OODN) modulation with fluid antenna systems (FASs). A unified analytical framework is developed to evaluate the performance of FAS- assisted OODN receivers over additive white Gaussian noise and generalized \k{appa}-μ fading channels. The analysis incorporates fluid antenna port selection, the number of available ports, and spatial correlation. Analytical expressions for the average bit error probability are derived and the achievable diversity order is characterized. All expressions are validated through Monte Carlo simulations. Results demonstrate that the spatial diversity provided by the FAS significantly enhances the reliability of OODN transmissions while preserving their inherent low-complexity, non-coherent operation without carrier-phase recovery. The proposed framework establishes a new research direction for energy-efficient Internet of Things (IoT) and machine-type communication systems.

0.04

On the Performance of RIS-Empowered Transmitters with Receive Combining Techniques

eess.SP ·2026-10-19 ·Muhammed Faruk Karabay, Oğuz Kucur, Ertugrul Basar
similarity 0.49
Abstract

Reconfigurable intelligent surface (RIS)-empowered transmitters offer a promising basis for hardware-efficient multi-antenna architectures in next-generation wireless networks. In particular, combining these transmitters with low-complexity reception techniques such as receive antenna selection (RAS) can further simplify the receiver architecture. In this paper, we investigate the impact of practical phase-shift constraint on RIS-empowered multi-antenna systems employing maximal ratio combining (MRC) and RAS. Since each RIS element can apply only a single phase-shift at a given time, the system performance degrades substantially when multiple receive antennas are active simultaneously. To quantify this effect, closed-form outage probability expressions are derived and asymptotic analyses are carried out over Rician fading channels. We show that the practical phase-shift constraint of RIS-based transmitters can degrade the diversity order of MRC and in addition, RAS outperforms MRC in the examined system models, contrary to the conventional performance ordering of these techniques.

0.15

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.48
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15

Performance Analysis of LoRa and LR-FHSS in 3GPP LEO Satellite and HAPS Channel Scenarios for Remote Area IoT Coverage

eess.SP ·2026-09-07 ·Jean Michel de Souza Sant'Ana, Nurul Huda Mahmood, Vinicius Pozzobon Borin
published similarity 0.47
Abstract · 5 pages, 5 figures, 2 tables, presented at Wireless Europe 2026, Rimini, Italy, June 2026

In this paper, we analyze and compare the performance of LoRa and LR-FHSS in a remote area Internet-of-Things (IoT) connectivity scenario using a low-earth orbit (LEO) satellites and high-altitude platform station (HAPS)-mounted gateway. We conducted a link budget analysis to evaluate communication stability to assess the ability of the technologies to support the different distances and behaviors using a 3GPP channel model for non-terrestrial networks. Several parameters are considered, such as altitude, minimum elevation angle as well as the impact of different types of loss, such as shadow and fast fading, ionosphere scintillation loss, for example. Our findings highlight the performance gap between LR-FHSS and LoRa in terms of both connectivity. We also highlight how lower HAPS altitudes can benefit certain LoRa settings compared to LEO satellites. We show that HAPS can enable the use of lower LoRa spreading factors, which improves scalability and energy efficiency, while LR-FHSS and a higher spreading factor LoRa remain the solution for LEO satellites.

0.36

Sensing Assisted Satellite Backhaul with FBL UL and Broadcast DL for Massive IoT

cs.IT ·2026-09-23 ·Tijana Devaja, Milica Petkovic, Israel Leyva-Mayorga, Dejan Vukobratovic, Cedomir Stefanovic
published similarity 0.46
Abstract

Massive Internet of Things (IoT) networks operate with short packets whose reliability is limited by finite block- length (FBL) effects, while remote deployments increasingly rely on Low Earth Orbit (LEO) satellites for backhaul connectivity that is sensitive to atmospheric attenuation. In this paper, we pro- pose a unified end-to-end framework for satellite-assisted massive IoT networks that jointly models uplink FBL random access, sensing assisted satellite backhaul, and worst user broadcast downlink transmission. Uplink reliability is characterized using stochastic geometry, while atmospheric sensing and conservative SNR margins enable FBL-safe backhaul adaptation. Numerical results reveal an optimal uplink access probability due to the tradeoff between spatial reuse and FBL reliability, and show that sensing assisted backhaul margins significantly improve robustness against attenuation uncertainty.

0.29

Centralized RAN for Future Low-Power Wide-Area Networks: A LoRa Case Study

eess.SP ·2026-08-24 ·Joachim Tapparel, Amavi Dossa, El Mehdi Amhoud, Andreas Burg
published similarity 0.46
Abstract · Accepted for publication in IEEE Internet of Things Magazine

In recent years, low-power wide-area network (LPWAN) technologies have gained significant traction as a connectivity option for Internet of Things (IoT) applications. While these networks have been successful in providing long-range, low-power, and low-cost connectivity, they currently face scalability, reliability, and efficiency challenges that require immediate attention. In this paper, we first identify important challenges for LPWANs. We then advocate for the introduction of a centralized radio access network (C-RAN) architecture tailored for LPWANs and present a proof-of-concept implementation and deployment of the proposed C-RAN for the widely popular long range (LoRa) standard. We also provide experimental results to demonstrate and quantify the increased sensitivity that can be obtained from joint processing of the baseband signals of multiple receivers, enabled by the proposed centralized architecture in quasi-static scenarios and drone-mounted transmitters.

0.35

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.46
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34