CS Paper Radar

Evaluating Mesh Reconstruction Methods for Crop Phenotyping

Karanvir Singh, Theo Morales, Binh-Son Hua, Mukesh Saini

cs.CV ·submitted 2026-09-15 10:02 UTC · v2

Abstract

Phenotyping an agricultural crop is crucial for studying its entire life cycle, as it provides vital insights to improve yield and, ultimately, food production. Doing the same for crops grown on remote sites is a challenge for the specialists who cannot be available on-site. 3D reconstruction techniques offer a promising solution to this problem by enabling crop digitization, allowing specialists to access the resulting 3D crop models from anywhere at any time. In this work, we evaluate recent 3D reconstruction pipelines for crop phenotyping. We focus on 7 mesh reconstruction pipelines and measure the fidelity and consistency of their outputs qualitatively and quantitatively. Our results suggest that the meshes produced by the GGGS, PGSR, and 2DGS are preferable to the other pipelines, owing to their quantitative metrics and visually pleasing outputs. The GGGS pipeline is better than the second-best pipeline (2DGS) by about 27% on the radar chart with 5 dimensions, namely, User ratings, Chamfer distance, LPIPS, PSNR, and SSIM.

Comment
12 pages, 17 Figures

Closest papers

Nearest neighbours by meaning across the whole index.

Denoising-Aware Temporal Point Cloud Completion for 3D Crop Architecture Recovery and Phenotypic Trait Extraction

cs.CV ·2026-08-28 ·Mrudul Mittal, Soumyashree Kar
benchmark similarity 0.62
Abstract · 25 pages of pdf for manuscript , total 12 files including bbl and tex

High-throughput phenotyping depends on accurate 3D reconstruction of plants across growth stages, yet the development and evaluation of temporal completion methods are limited by the lack of datasets with complete geometric ground truth. To address this challenge, we introduce SynthCrop4D, a procedurally generated synthetic dataset of temporally evolving plant point clouds that provides controllable noise, occlusion, and complete plant geometry for benchmarking reconstruction methods. Using this dataset, we evaluate a two-stage pipeline that combines spatial denoising and temporal point cloud completion. First, a denoising module removes structural artifacts from raw laser-scanned point clouds. The resulting data are then processed by an Adaptive Temporal PoinTr model that reconstructs the current growth stage (t) using information from the previous stage (t-1), enabling recovery of regions missing due to self-occlusion. We evaluate the proposed framework on both SynthCrop4D and the real-world Pheno4D dataset (tomato and maize) under settings with and without denoising. Results show that denoising substantially improves reconstruction quality, with the best configuration achieving a Chamfer Distance of 0.0061 on SynthCrop4D (Temporal PoinTr + Mamba-DG) and an F-Score of 0.2080 on Pheno4D (Vanilla PoinTr + Mamba-DG). We further demonstrate the use of completed point clouds for phenotypic trait extraction, including plant height, canopy width, and convex hull volume, obtaining hull-volume MAEs of 0.021 on synthetic data and 0.343 on real data. Together, SynthCrop4D and the proposed pipeline provide a benchmark and methodology for temporal plant reconstruction and high-throughput crop phenotyping.

0.24

A Vision-Language Model (VLM)-based Pipeline for End-to-End Procedural Modeling of Field-Grown Maize from Point Clouds

cs.CV ·2026-10-02 ·Mozhgan Hadadi, Talukder Z. Jubery, Adarsh Krishnamurthy, Baskar Ganapathysubramanian
similarity 0.62
Abstract

Editable 3D models of field-grown crops support high-throughput phenotyping and in silico breeding trials, but building them from scanned point clouds requires organ-level segmentation and fitting. Procedural generators can turn an organ-level parameter set into an analysis-suitable 3D model, but obtaining that set requires hours of manual tuning per plant or segmentation models trained on species-specific labels. We present an automated pipeline that reconstructs procedural maize models from raw 3D point clouds without manual tuning or species-specific training data. A multimodal vision-language model (VLM) annotates leaf midlines in rendered orthographic views. Deterministic geometric algorithms back-project the annotations onto the point cloud, merge them into 3D leaves by cross-view consensus, and grow the midlines to full blades on an orientation-weighted surface graph. Measured organ parameters populate a plant descriptor for a Non-Uniform Rational B-Spline (NURBS)-based procedural model generator. Each leaf surface is then refined against its scan points by differentiable NURBS fitting. The pipeline reached a median whole-plant Chamfer distance of 5.4 mm on 100 genotypically diverse field-grown maize plants from the MaizeField3D dataset. The reconstructions were closer to the scans than those of an earlier semi-automated pipeline based on manual annotations. The pipeline recovered 1,017 of 1,023 (99.4%) curated reference leaves at an intersection-over-union of at least 0.5 without using those labels as input. These results show that VLM annotations become usable organ-level measurements when downstream geometric stages can correct them. This makes automated generation of editable 3D plant assets feasible at the scale of modern phenotyping experiments.

0.19

Plant Orbiter: 3D Plant Reconstruction and Generation with Video Diffusion Orbit Cameras and 3D Gaussian Splatting

cs.CV ·2026-11-09 ·Zane K. J. Hartley, Yong En Kok, Lewis A. G. Stuart, Andrew P. French, Michael P. Pound
similarity 0.59
Abstract · Submitted to Plant Phenomics. 16 pages, 6 figures, 5 tables

Modern digital phenotyping pipelines require the precise measurement of a range of 3D morphological plant traits. The accurate, high throughput acquisition of these traits helps breeders and researchers accelerate the development of new varieties, techniques and products. Recent advances in 3D technologies have enabled a rapid transition from 2D to 3D pipelines, but high throughput acquisition of digital 3D twins of plants remains a significant challenge due to complex morphology, thin structures and occlusions. In this paper we present Plant Orbiter, a new approach to generating 3D plants that leverages recent advances in video diffusion to produce high quality 3D Gaussian Splats of plants from a single image. We show that our method more accurately recreates plant morphology than other state-of-the-art methods, achieving the highest 3D F-score against all baselines, while being more practical for high throughput pipelines due to easier alignment and reduced cost of camera placement. Combined with a 2D diffusion model, we show that our method also achieves state-of-the-art results in the generation of 3D plant models from a text prompt.

0.23

Advancing global crop simulations with differentiable modelling

cs.CE physics.geo-ph ·2026-10-27 ·Yunan Lin, Sebastian Bathiany, Maximilian Gelbrecht, Jens Heinke, Christoph Müller +1 more
similarity 0.59
Abstract

Global gridded crop models (GGCMs) are crucial for assessing the performance of food producing systems, for example under climate change or their contribution to environmental challenges. However, systematic calibration of their parameters remains a long-standing challenge. Persisting uncertainties in these parameters propagate into future crop projections, thereby affecting and potentially biasing food security assessments. Here we present a fully process-based differentiable GGCM implementation that offers a fundamentally new approach to parameter calibration, uncertainty quantification, yield loss attribution, and management optimization. Using automatic differentiation, we optimize selected model parameters against site-scale carbon and water flux observations, reducing normalized root-mean-square errors at held-out sites by 24.8-36.2% compared to the default state-of-the-art model. Without calibration against yield data, the optimized model better captures detrended yield anomalies across 61.2-64.3% of global crop area and reduces low-yield errors by 3.4-43.5% for wheat, rice, maize and soybean. It also ranks among the best performers in comparison with GGCMI Phase 3 models. Future simulations show that calibration reduces the projected end-of-century rice production increase from 55.1% to 22.1% under SSP5-8.5. Parameter ensembles further reveal that parameterizations with comparable historical skill can produce markedly different future production responses. Beyond calibration, differentiability enables the attribution of crop losses under extreme events and supports the design of adaptive crop management strategies. For the 2018 European drought, we identify spring heat and water limitation as major contributors to wheat yield losses and develop more effective irrigation strategies for mitigating simulated regional yield losses.

0.25

Efficient 3D plant segmentation through multiscale graph learning and optimized geometric processing

cs.CV ·2026-11-07 ·Jesus Ivan Ruiz-Martinez, Andres Mendez-Vazquez, Eduardo Rodriguez-Tello
similarity 0.59
Abstract

Plant organ segmentation on compact computing platforms requires accurate predictions and affordable geometric preparation. We develop and evaluate a multiscale edge based graph attention model that combines local shape descriptors, two neighborhood scales and a residual stem and leaf correction in approximately 78 thousand parameters. The engineering application is plant point cloud segmentation for precision agriculture, assessed through grouped accuracy experiments and physical Raspberry Pi 5 inference. Broad comparisons with hierarchical, graph and transformer baselines establish PointNeXt as the strongest external accuracy reference among the tested local recipes. A nested four variant ablation on a local maize collection separates geometric information from the combined multiscale configuration across seven outer groups and three seeds. The complete model achieves the highest mean intersection over union, 86.36%, although uncertainty and boundary errors qualify the contribution of each component. We then optimize full cloud principal component analysis, sampling and neighbor queries without changing learned weights or descriptor definitions. All 1,180 paired desktop comparisons on PlantNet and TomatoWUR preserve exact logits and predictions. Multiscale pipeline latency falls from 330.33 to 96.82 milliseconds on PlantNet and from 1,054.52 to 463.10 milliseconds on TomatoWUR. PointNeXt also benefits from optimized sampling and remains faster over the complete pipeline. These results support compact graph learning with reduced geometric overhead, while physical board measurements establish inference feasibility rather than energy efficiency or readiness for autonomous flight.

0.15

Watertight Mesh Optimization of Textured Objects

cs.CV ·2026-11-19 ·Nathaniel Burgdorfer, Philippos Mordohai
similarity 0.56
Abstract

When reconstructing high-quality 3D assets from images, existing approaches often excel at one objective while compromising another, and frequently overlook the intrinsic quality of the reconstructed surfaces. We present MODL, a framework that jointly optimizes geometry and view-dependent appearance directly on a watertight triangle mesh. Our approach combines Laplacian-preconditioned optimization for smooth vertex updates with curvature-adaptive remeshing to preserve fine details and well-shaped triangles. The triangle mesh is optimized subject to multi-view normalized cross-correlation constraints, but without segmentation, geometric supervision or alpha-blending. Evaluations on object reconstruction datasets demonstrate that MODL achieves competitive novel-view synthesis while producing geometrically accurate models with superior intrinsic mesh quality. Our results highlight the potential of direct mesh optimization to unify photorealistic rendering, geometric reconstruction, and practical 3D asset creation.

0.23

AI-enabled Low-Cost 3D Maize Ear Morphometry Platform at Breeding Scale

cs.CV ·2026-08-31 ·Therin Young, Elijah Rodriguez, Lisa Coffey, Talukder Zaki Jubery, Adarsh Krishnamurthy +2 more
similarity 0.56
Abstract

Maize ear geometry (length, width, curvature, and volume) is closely tied to yield and grain-filling outcomes, but existing high-throughput phenotyping pipelines remain constrained by the cost, labor, and specialized hardware they require. We developed and validated a low-cost pipeline that reconstructs a watertight 3-D mesh of a maize ear from a single 20-second video captured with a consumer-grade DSLR on a motorized turntable under uniform LED illumination. Camera poses from a multi-seed COLMAP procedure initialize a Neural Radiance Field (NeRF), and a cylindrical holder of known diameter, visible in every frame, provides automatic metric scaling with downstream geometric quality control. Applied to 300 ears spanning a diverse maize inbred panel, 250 (83.3%) passed automated processing and quality control. Skeleton length agreed with manual caliper measurements across all 250 ears (R^2 = 0.964, RMSE = 4.68 mm), and convex-hull volume agreed with water-displacement volume on a 15-ear subset spanning the full size range (R^2 = 0.982, RMSE = 5.26 mL). Residual length error grew with ear curvature, whereas bounding-box height, which records the same straight-line chord as calipers, showed no such trend; the discrepancy therefore originates in the measurement definition, since calipers record the chord while skeleton length traces the geodesic arc. The capture hardware costs approximately 607 USD, and operator involvement fell from roughly five minutes to one minute per ear, with all downstream processing running unattended. The platform provides a foundation for breeding-scale 3-D ear phenotyping.

0.48

Scale Matters: Adaptive Granularity Selection for Cross-Species 3D Plant Organ Segmentation

cs.CV ·2026-08-18 ·Carla Salazar, Lazaros Nalpantidis
publishedcode/data similarity 0.56
Abstract · Accepted at the Computer Vision in Plant Phenotyping and Agriculture (CVPPA) Workshop at the European Conference on Computer Vision (ECCV) 2…

Recent 3D foundation models provide powerful feature representations for point cloud learning by controlling spatial granularity. However, relying on a fixed spatial granularity severely limits generalization in applications like plant phenotyping, where organ morphology and size vary substantially across species and growth stages. To address this, we propose AGS-PlantSeg, a few-shot 3D plant organ segmentation method that leverages the frozen Utonia (arXiv:2603.03283) foundation model combined with Adaptive Granularity Selection. By dynamically selecting the best granularity levels for each specific plant model, our method extracts optimized geometric features for a lightweight MLP segmentation head. Extensive experiments across PLANesT-3D (arXiv:2407.21150), Pheno4D , and Crops3D demonstrate that AGS-PlantSeg significantly improves cross-species generalization, achieving 88.9% average mIoU performance and outperforming fixed-granularity baselines by 2.5 mIoU points. Despite requiring minimal annotated data, our approach is highly competitive with fully supervised, plant-specific architectures.

0.39