CS Paper Radar

AI-enabled Low-Cost 3D Maize Ear Morphometry Platform at Breeding Scale

Therin Young, Elijah Rodriguez, Lisa Coffey, Talukder Zaki Jubery, Adarsh Krishnamurthy, Patrick Schnable, Baskar Ganapathysubramanian

cs.CV ·submitted 2026-08-31 02:28 UTC · v1

Abstract

Maize ear geometry (length, width, curvature, and volume) is closely tied to yield and grain-filling outcomes, but existing high-throughput phenotyping pipelines remain constrained by the cost, labor, and specialized hardware they require. We developed and validated a low-cost pipeline that reconstructs a watertight 3-D mesh of a maize ear from a single 20-second video captured with a consumer-grade DSLR on a motorized turntable under uniform LED illumination. Camera poses from a multi-seed COLMAP procedure initialize a Neural Radiance Field (NeRF), and a cylindrical holder of known diameter, visible in every frame, provides automatic metric scaling with downstream geometric quality control. Applied to 300 ears spanning a diverse maize inbred panel, 250 (83.3%) passed automated processing and quality control. Skeleton length agreed with manual caliper measurements across all 250 ears (R^2 = 0.964, RMSE = 4.68 mm), and convex-hull volume agreed with water-displacement volume on a 15-ear subset spanning the full size range (R^2 = 0.982, RMSE = 5.26 mL). Residual length error grew with ear curvature, whereas bounding-box height, which records the same straight-line chord as calipers, showed no such trend; the discrepancy therefore originates in the measurement definition, since calipers record the chord while skeleton length traces the geodesic arc. The capture hardware costs approximately 607 USD, and operator involvement fell from roughly five minutes to one minute per ear, with all downstream processing running unattended. The platform provides a foundation for breeding-scale 3-D ear phenotyping.

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Maize Ear Phenotyping Using 3D Reconstructions

cs.CV ·2026-09-01 ·Ritwesh A. Kumar, Som Tripathi, Peja Matthews, Srikar Reddy, Talukder Zaki Jubery +3 more
similarity 0.74
Abstract

Maize kernel traits such as row number, kernels per row, and kernel size vary largely for genetic reasons and are consistently associated with regions of the genome that influence yield. Manual measurement of these traits, however, cannot keep pace with the volume of maize generated in a breeding program. To address this, we developed and validated a fully automated pipeline for extracting these traits from 3D point clouds of corn ears, built on a recently developed video-to-point-cloud platform. Raw video frames are processed through COLMAP and NeRF, the ear is isolated via density-based separation, and the point cloud is distance-calibrated to physical units. The calibrated ear point cloud was Z-axis aligned via PCA and cylindrically unwrapped to a 2D image. We enhanced contrast and performed zero-fine-tuning instance segmentation using Cellpose-SAM. A triple-juxtaposed unwrap strategy was used to prevent double-counting at the seam. The pipeline achieved kernel count R^2 = 0.921 (MAPE = 10.33%) and kernel row number within +-2 rows for 95.2% of ears (MAE = 0.75 rows) on a 168-ear held-out set from the 268-ear labeled dataset. The resulting multi-trait dataset has known genotype identity for each ear, positioning it for phenotype-to-genotype association analyses.

0.33

A Vision-Language Model (VLM)-based Pipeline for End-to-End Procedural Modeling of Field-Grown Maize from Point Clouds

cs.CV ·2026-10-02 ·Mozhgan Hadadi, Talukder Z. Jubery, Adarsh Krishnamurthy, Baskar Ganapathysubramanian
similarity 0.61
Abstract

Editable 3D models of field-grown crops support high-throughput phenotyping and in silico breeding trials, but building them from scanned point clouds requires organ-level segmentation and fitting. Procedural generators can turn an organ-level parameter set into an analysis-suitable 3D model, but obtaining that set requires hours of manual tuning per plant or segmentation models trained on species-specific labels. We present an automated pipeline that reconstructs procedural maize models from raw 3D point clouds without manual tuning or species-specific training data. A multimodal vision-language model (VLM) annotates leaf midlines in rendered orthographic views. Deterministic geometric algorithms back-project the annotations onto the point cloud, merge them into 3D leaves by cross-view consensus, and grow the midlines to full blades on an orientation-weighted surface graph. Measured organ parameters populate a plant descriptor for a Non-Uniform Rational B-Spline (NURBS)-based procedural model generator. Each leaf surface is then refined against its scan points by differentiable NURBS fitting. The pipeline reached a median whole-plant Chamfer distance of 5.4 mm on 100 genotypically diverse field-grown maize plants from the MaizeField3D dataset. The reconstructions were closer to the scans than those of an earlier semi-automated pipeline based on manual annotations. The pipeline recovered 1,017 of 1,023 (99.4%) curated reference leaves at an intersection-over-union of at least 0.5 without using those labels as input. These results show that VLM annotations become usable organ-level measurements when downstream geometric stages can correct them. This makes automated generation of editable 3D plant assets feasible at the scale of modern phenotyping experiments.

0.19

How Merge-Tolerant Are Vision Transformers for Wheat Phenotyping?

cs.CV ·2026-08-24 ·Simon Ravé, Pejman Rasti, David Rousseau
publishedbenchmark similarity 0.56
Abstract · Accepted to the CVPPA workshop at ECCV 2026

Vision-based wheat phenotyping requires repeated measurements under deployment constraints, from growth-stage recognition to wheat-head counting and organ segmentation. Plain Vision Transformers (ViTs) provide a common architecture for these tasks, but quadratic attention limits high-throughput and edge inference. Training-free token merging is attractive because it can be inserted into trained models without retraining. We provide a systematic benchmark of ToMe and Mutual Pair Merging across growth-stage classification, wheat-head detection, and wheat-organ segmentation, measuring task quality, throughput, token count, and peak GPU memory, with additional Raspberry Pi 5 measurements. The benchmark reveals a clear hierarchy: classification is highly merge-tolerant, while detection and segmentation are constrained by repeated instances, thin organs, dense boundaries, reconstruction, and runtime overhead. Optimized attention backends can erase apparent speedups, so deployment value must be profiled on the target runtime rather than inferred from token count.

0.36

Evaluating Mesh Reconstruction Methods for Crop Phenotyping

cs.CV ·2026-09-15 ·Karanvir Singh, Theo Morales, Binh-Son Hua, Mukesh Saini
similarity 0.56
Abstract · 12 pages, 17 Figures

Phenotyping an agricultural crop is crucial for studying its entire life cycle, as it provides vital insights to improve yield and, ultimately, food production. Doing the same for crops grown on remote sites is a challenge for the specialists who cannot be available on-site. 3D reconstruction techniques offer a promising solution to this problem by enabling crop digitization, allowing specialists to access the resulting 3D crop models from anywhere at any time. In this work, we evaluate recent 3D reconstruction pipelines for crop phenotyping. We focus on 7 mesh reconstruction pipelines and measure the fidelity and consistency of their outputs qualitatively and quantitatively. Our results suggest that the meshes produced by the GGGS, PGSR, and 2DGS are preferable to the other pipelines, owing to their quantitative metrics and visually pleasing outputs. The GGGS pipeline is better than the second-best pipeline (2DGS) by about 27% on the radar chart with 5 dimensions, namely, User ratings, Chamfer distance, LPIPS, PSNR, and SSIM.

0.29

Pointillist Maize: 3D Reconstruction of Field-Grown Maize Using RGB UAV Imagery

cs.CV cs.GR ·2026-11-16 ·Dewi Endah Kharismawati, Toni Kazic
similarity 0.54
Abstract · 26 pages, 8 figures, submitted to Frontiers in Plant Science

Three-dimensional reconstruction can extend field phenotyping to individual maize organs, but thin, flexible, occluding structures and plant movement complicate reconstruction. We evaluated whether consumer-grade UAV RGB video processed with Structure from Motion and multi-view stereo could recover recognizable field-grown maize structures, and examined the effects of acquisition trajectories and frame sampling. COLMAP reconstructions preserved recognizable leaves, stems, tassel branches, ears, silks, and brace roots. For an equal-frame comparison, we reconstructed one plant from two sets of 295 frames from the same video: a single orbit sampled at 5 frames/second and three orbits at different altitudes (ribbon skirt) sampled at 2 frames/second. After ground removal, the reconstructions contained 520,601 and 375,318 points, respectively. The single orbit yielded greater point concentration within plant structures and fewer visible gaps, while the ribbon skirt yielded fewer scattered points and slightly lower proportions of isolated points. In densely planted nursery rows, visible voids occupied 17.57% of the rendered scene with one orbit at 1 frame/second, decreasing to 5.07% with additional serpentine passes and 2.68% when the original orbit was sampled at 3 frames/second. Additional observations also increased point dispersion associated with plant movement. A curlicue trajectory tested in a different field in 2024 produced distinguishable individual plants without visible duplicated structures, although substantial voids remained, mainly on the soil surface. These results demonstrate the feasibility of recovering recognizable maize organs from consumer UAV imagery and reveal trade-offs between acquisition strategies, reconstruction completeness, and point dispersion. Independent geometric validation is still needed before quantitative phenotyping.

0.27

Zero-Shot 3D Plant Organ Segmentation with SAM3 and Semantic NeRFs

cs.CV ·2026-09-07 ·Andreas Gilson, Laura Hennig, Peter Pietrzyk
datasettheory similarity 0.54
Abstract · Submitted to CVPPA Workshop at ECCV 2026

Accurate 3D plant organ segmentation is fundamental to automated phenotyping. Existing approaches rely on annotated training data or species-specific model configurations. We present an annotation-free pipeline for 3D plant organ segmentation, combining text-prompted SAM3 segmentation with semantic neural radiance fields (NeRFs). Given only multi-view RGB images and a list of class names, our zero-shot pipeline produces semantically labeled 3D point clouds without manual annotation, per-species fine-tuning, or domain-specific preprocessing. Multi-view NeRF fusion acts as effective implicit consensus mechanism that lifts imperfect per-frame masks into accurate 3D labels. On a controlled Begonia maculata testbed the SAM3 pipeline achieves 92.6% mIoU, reaching 95.9% of the oracle upper bound established with perfect ground-truth masks. The pipeline was further evaluated on a new dataset spanning ten diverse plant point clouds reaching an average 0.856 mIoU, with leaf and pot IoU above 0.91 and 0.90 for every species, respectively. These results demonstrate that annotation-free 3D plant organ segmentation is now feasible and approaching the range of supervised methods.

0.15

Cross-Device Transfer of a Hospital-Trained Fetal Head Circumference Model to a Low-Cost Handheld Ultrasound Probe

eess.IV ·2026-10-28 ·Patrick Gao, Lara Hart, Ken Sullivan
benchmark similarity 0.53
Abstract · 24 pages, 5 figures, 4 tables

Automated fetal head circumference (HC) measurement reaches near-expert accuracy on the HC18 benchmark, but published models are trained and evaluated on hospital-grade equipment. We quantify what happens when such a model is carried to a low-cost handheld probe. A lightweight segmentation network (CSM, 0.13M parameters) was trained on HC18 across five independent runs and applied without modification to images from a $1,350 handheld probe (SonoQue C3), acquired at the same visit as the reference hospital scan in 18 patients. In-domain accuracy was 2.34 +/- 0.43 mm; on handheld images the same model gave 16.12 mm against the hospital record, a 6.9-fold degradation. Input preprocessing, a choice rarely reported, accounted for about a third of that gap: direct resizing gave 49.45 mm against 16.12 mm for an aspect-preserving pipeline. A leave-one-out data-efficiency curve showed that fine-tuning on two images significantly worsened accuracy, and that from four images upward error fell by 0.75 mm per doubling of the local dataset (p = 0.0045), although no training-set size up to 27 images significantly improved on the unmodified model. Much of the residual gap belongs to the reference rather than the model: scored against a manual tracing of the same image the model was already within 10.48 mm, and its disagreement with sonographer calipers on the same frame was a near-constant offset, negative in 10 of 10 cases. A single calibration constant estimated leave-one-out reduced that disagreement from 8.12 mm to 3.49 mm, reaching the intraobserver reproducibility reported for experienced sonographers, but did not improve agreement with the hospital record. Cross-device evaluations should therefore report the input preprocessing used and characterise the precision of their reference standard.

0.21

Efficient 3D plant segmentation through multiscale graph learning and optimized geometric processing

cs.CV ·2026-11-07 ·Jesus Ivan Ruiz-Martinez, Andres Mendez-Vazquez, Eduardo Rodriguez-Tello
similarity 0.53
Abstract

Plant organ segmentation on compact computing platforms requires accurate predictions and affordable geometric preparation. We develop and evaluate a multiscale edge based graph attention model that combines local shape descriptors, two neighborhood scales and a residual stem and leaf correction in approximately 78 thousand parameters. The engineering application is plant point cloud segmentation for precision agriculture, assessed through grouped accuracy experiments and physical Raspberry Pi 5 inference. Broad comparisons with hierarchical, graph and transformer baselines establish PointNeXt as the strongest external accuracy reference among the tested local recipes. A nested four variant ablation on a local maize collection separates geometric information from the combined multiscale configuration across seven outer groups and three seeds. The complete model achieves the highest mean intersection over union, 86.36%, although uncertainty and boundary errors qualify the contribution of each component. We then optimize full cloud principal component analysis, sampling and neighbor queries without changing learned weights or descriptor definitions. All 1,180 paired desktop comparisons on PlantNet and TomatoWUR preserve exact logits and predictions. Multiscale pipeline latency falls from 330.33 to 96.82 milliseconds on PlantNet and from 1,054.52 to 463.10 milliseconds on TomatoWUR. PointNeXt also benefits from optimized sampling and remains faster over the complete pipeline. These results support compact graph learning with reduced geometric overhead, while physical board measurements establish inference feasibility rather than energy efficiency or readiness for autonomous flight.

0.15