CS Paper Radar

Overcoming technical adoption barriers for mobile service robots in rehabilitation

Christian Sternitzke, Sebastian Blumenthal, Lukas Kleedoerfer, Verena Deserno, Anke Mayfarth

cs.RO ·submitted 2026-09-15 11:08 UTC · v1

Abstract

Many publications on robotic systems in healthcare describe early-stage work on low technology readiness levels. This paper describes how a mobile service robot approved as a medical device reaches higher technology readiness levels by adding peripheral functions and smaller improvements, which are pivotal for user acceptance in clinical environments and which often cannot be elicited by questioning users ex-ante as certain aspects only come in mind from testing the systems in clinical settings or operational environments. Especially developers of service robots in healthcare are advised to plan with such downstream developments, which can take significant implementation time, to obtain user acceptance and achieve widespread adoption of their robotic systems.

Comment
16 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Benchmarking Robots for Everyday Environments: From Lab Experiments to Real-World Operations

cs.RO cs.HC ·2026-09-22 ·Raphael Memmesheimer, Martina Overbeck, Dominik Beyer, Björn Kral, Sabine Bellmann +17 more
published similarity 0.58
Abstract · 46 pages, 14 figures, 5 tables. Accepted for publication in Frontiers in Robotics and AI (Field Robotics)

This study presents an interdisciplinary process for benchmarking service robots in public everyday environments, addressing the gap between laboratory metrics and real-world operation at technology readiness levels 6-7. Three robots were evaluated in three use cases: outdoor park cleaning, pedestrian underpass cleaning, and interactive assistance in a public library. Over three years (2023-2025), seven benchmarking events (a consensus workshop and six on-site evaluations, two per use case) assessed the robots in increasingly realistic settings, from controlled conditions to public operation. An interdisciplinary panel of experts in robotics, human-robot interaction, safety, and economic viability consolidated use-case-specific metrics into a shared evaluation concept refined across three phases. Rather than ranking the robots, the evaluation examined how task fulfillment, interaction quality, safety, and economic viability interact in the transition from laboratory prototype to operational system. Direct quantitative comparability across the heterogeneous use cases remained limited, characteristic of benchmarking at this maturity level. The process yielded cross-case insights: increasing environmental realism introduces challenges that uniform metrics capture only in part; the interaction-quality guideline works best as a modular instrument adapted to each use case; safety was assessed by occupational-safety and product-certification experts who adapted industrial test procedures for public settings; and economic viability proved a cross-cutting dimension. We conclude that benchmarking at higher technology readiness levels is well served by a shared procedure for selecting and documenting metrics across these four categories, with safety as mandatory, rather than by a fixed set of metrics: generalizability lies in the procedure rather than in identical metrics.

0.41

Longitudinal Robot Learning from Demonstration with Care Providers in a Home Environment

cs.RO cs.HC ·2026-08-25 ·Nina Moorman, Julianna Schalkwyk, Vriksha Srihari, Qingyu Xiao, Kamel Alrashedy +4 more
publishedcode/data similarity 0.54
Abstract · ICRA 2026 Workshop on Bridging the Gap between Robot Learning and Human-Robot Interaction

Learning from demonstration (LfD) methods enable non-expert end users to teach robots novel skills without explicit programming. However most evaluations of the usability of LfD with non-experts has been conducted in controlled laboratory environments with a robotics experimenter present. In this work we identify non-expert end users' key barriers when teaching robots via demonstration without live robotics expert feedback in a home environment. In our human subjects experiment we support the non-expert end users through two forms of demonstrator guidance developed in prior work: pre-training and adaptive feedback. Towards the ecological validity of the evaluation, we conduct this experimentation over multiple visits, with a population of care providers. Finally, we propose to open source the resulting LfD dataset of care providers teaching a robot assistive tasks over multiple visits to a home environment.

0.32

Robotic-supported Data Loss Detection in Android Applications

cs.SE cs.RO ·2026-10-14 ·Davi Freitas, Breno Miranda, Juliano Iyoda
top venuehighly cited similarity 0.54
Abstract · Brazilian Symposium on Software Engineering (SBES) 2024

Smartphones have become integral to modern life due to their diverse applications. However, the development of applications for these devices faces significant challenges, primarily due to two factors: (i) the diverse hardware and operating system versions that require testing across multiple configurations; and (ii) the imperative activity of testing the smartphone in a non-invasive way (similar to an end-user interaction), which is expensive, tedious and error-prone as it is usually carried out manually. In this context, robotic automation has emerged as an effective solution for addressing the diversity of smartphone systems and versions, and in performing some testing tasks non-invasively. In addition, automated robots facilitate quick, accurate, and repetitive testing, thus enabling developers to validate their applications across various configurations effectively. This results in a less invasive verification and in a significant reduction in time spent on manual testing, thus accelerating the development cycle. Our work proposes R-DLD (Robotic-supported Data Loss Detection), a robot-assisted infrastructure for data loss detection in Android applications, offeringless invasive and more realistic tests by interacting directly with smartphone sensors. The robot is constructed using cost-effective materials, facilitating its adoption in testing environments. In our empirical evaluation R-DLD successfully identified 341 data loss issues in 77 randomly selected apps from an Android store. All reported bugs received responses from the developer, with 89.55% confirming the data loss problems, while 35.82% have being subsequently fixed.

0.59

Clinician-AI Collaboration in Endovascular Neurointerventions: In-Vitro User Study of Copilot Assistance Modes for Robotic Navigation Across the Autonomy Spectrum

cs.RO ·2026-11-02 ·Nikola Fischer, Harry Robertshaw, S. M. Hadi Sadati, Xingyu Chen, Weiyuan Deng +14 more
similarity 0.53
Abstract · 13 pages, 10 figures, 4 tables

Mechanical thrombectomy (MT) is an effective treatment for acute ischemic stroke, yet access remains limited by the availability of neurointerventional expertise. Telerobotic and AI-assisted systems may help address this challenge, but it remains unclear how clinicians interact with different levels of autonomy and how autonomous navigation systems perform in realistic environments. This work introduces Copilot Assistance Modes (CAMs), a framework for clinician-AI collaboration in robotic endovascular navigation spanning the autonomy spectrum from manual operation to full autonomy. In the first in-vitro user study comparing clinician-AI collaboration strategies, 11 experts and two students evaluated six navigation modes in a patient-specific vascular phantom. Objective performance metrics were combined with subjective assessments, including workload and usability. Autonomous performance was additionally evaluated both in silico and in vitro to investigate sim-to-real transfer. Hands-on manual navigation achieved the strongest overall performance (100% success). While fully autonomous navigation achieved 81% success in simulation, performance dropped to 23% in vitro. In contrast, several clinician-AI shared-autonomy modes achieved success rates of 92-97%, approximately four times higher than full autonomy and comparable to direct robotic control (95%), demonstrating mitigation of sim-to-real domain shift through clinician-AI collaboration. Among the evaluated AI-driven approaches, user-directed task delegation and rotational shared control demonstrated the most favorable balance between performance and clinician acceptance. These findings suggest that effective clinician-AI collaboration and allocation of control authority may currently be more important for reliable robotic neurointerventional navigation than increasing autonomy alone.

0.25

Wellness Robots and the Path to Full Autonomy

cs.RO ·2026-11-06 ·Mohammad H. Mahoor, Matthew Hessler, Lombe Chileshe, Ola Alsaadi, Eshrat Emamian +2 more
similarity 0.53
Abstract

This paper introduces the autonomous wellness robot as a distinct category of socially assistive system, defined by its capacity to continuously assess and respond across the seven ICAA dimensions of wellness (see Figure 2). We propose the Care Robot Autonomy Scale (CRAS): a six-level taxonomy (L0-L5) modeled on the automotive automation standard SAE J3016 and evaluated across four wellness-aligned dimensions. We present Ryan, developed initially at the University of Denver and commercialized by DreamFace Technologies, as a case study. NIH/NIA-funded longitudinal evidence (N = 18; 887 hours) shows statistically significant cognitive improvement (SLUMS +2.61, p = 0.015) and a clinically meaningful directional reduction in depressive symptoms (PHQ-9 -2.50, p = 0.073), with no novelty effect. We position Ryan today at CRAS Level 1-2, with emerging Level 3 capabilities in some dimensions, and outline a three-phase roadmap to L5 (full autonomy) by the early 2030s.

0.26

DASH: A da Vinci Adapter for Serial-link and Humanoid Robots as an Accessible Platform for Surgical Robotics Research

cs.RO ·2026-10-05 ·Sara Wickenhiser, Junrong Zhou, Zekai Liang, Lizzie Peiros, Liu Shanglei +1 more
similarity 0.53
Abstract · 8 pages, 9 figures

Robotic minimally invasive surgery offers well-documented clinical benefits, but the cost and infrastructure requirements of purpose-built platforms limit access in rural and lower-resourced facilities. Recent work has teleoperated general-purpose robots for laparoscopic tasks and in vivo procedures, but relied on handheld instruments coupled through passive linkages rather than native robotic actuation. Instead, we adapt da Vinci Classic and Xi instruments onto general-purpose robots that can integrate in clinical workflows. We present DASH, a da Vinci Adapter for Serial-link and Humanoid platforms, consisting of two types of adapters that require no modification to the instruments themselves. Each adapter is compatible with many robotic platform load capacities, engages the instrument's native latch, and wirelessly identifies inserted tools to load instrument-specific kinematics and coupling matrices. Teleoperated experiments demonstrate the efficacy of DASH and its benefits for enabling research access to surgical robotic platforms.

0.45

ARTS: An Open-Source, Reproducible Three-Arm Platform for Autonomy Research in Minimally Invasive Surgery

cs.RO ·2026-11-11 ·Jiawei Ge, Chunwoo Kim, Antony Goldenberg, Douglas McDonough, Justin Liao +16 more
code/data similarity 0.52
Abstract · Submitted to the 2027 International Symposium on Medical Robotics (ISMR). † Equal contribution

Research on surgical autonomy needs open platforms that any laboratory can build, yet the most widely shared platform depends on donated clinical hardware, and open alternatives on industrial arms each lack part of the surgical chain. We present the Autonomous Robotic Translational System (ARTS), an open-source three-arm platform for autonomy research in minimally invasive surgery, built entirely from purchasable parts for about USD 137,000. Two UR5e arms hold wristed da Vinci X/Xi instruments, a UR5 arm holds a stereo endoscope with two FLIR cameras, the surgeon console provides haptic handles, footswitches and a stereo viewer, and a hardware stop independent of the software lets a supervisor freeze all three arms in place. The ROS 2 software pins every dependency, installs from the same scripts on bare metal or in containers, and records stereo images with hardware-measured timing. On the real arms, ARTS commands each arm at its controller's full rate (e.g., 500 Hz on the UR5e), the two cameras expose within 12 microseconds of each other, hand motion reaches the arm in 58 ms, and the endoscope image reaches the monitor in 68 ms. The ISO 9283 pose repeatability is 0.14-0.25 mm, comparable to a da Vinci Research Kit (dVRK) Classic arm on the same protocol, and an optical tracker measured a mean remote-center-of-motion error of 0.34-0.37 mm. Three expert and three novice operators performed the Fundamentals of Laparoscopic Surgery (FLS) peg transfer through a laparoscopic trainer box, and one of the experts sutured on a suture pad. The hardware designs, firmware and software are available at https://github.com/MRE-Lab-UMD/arts.

0.56

Inspect Robots: Evaluating the Capabilities and Safety of Embodied AI

cs.RO ·2026-10-05 ·Christopher Leet, Achu Menon, Sravanthi Machcha, Sabrina Zou, Aayushya Patel +10 more
code/data similarity 0.51
Abstract · Submitted to The Science of Physical AI Safety (SPAIS) Workshop at CoRL 2026

General purpose language models are increasingly able to control robotic hardware. Understanding the capabilities and safety of these models when embodied is therefore increasingly important for understanding their societal impact and risks. To this end, we introduce Inspect Robots, a modular, open-source framework for developing and running evaluations of embodied agents. Inspect Robots pairs customizable, reusable abstractions for specifying physical evaluations and analyzing their results with infrastructure that automates evaluation setup, execution and termination. We demonstrate Inspect Robots by using it to evaluate the capabilities and safety of six policies based on frontier language models. Inspect Robots has seen significant early uptake, receiving nearly 100,000 downloads in the three months since its release.

0.56