CS Paper Radar

Feedback-Modulated Harmonic Policies for Quadruped Locomotion

Yixuan Jia, Steven Roche, Jonathan P. How

cs.RO ·submitted 2026-09-16 00:08 UTC · v1

Abstract

Learned quadruped locomotion policies commonly map observations directly to joint-level actions, leaving the periodic structure of locomotion implicit in the policy. We investigate an alternative representation in which each joint trajectory is expressed as a command-conditioned Fourier series and modified online using feedback from the robot state. A context network generates the Fourier coefficients and the weights of a per-step feedback network, whose outputs adjust joint offsets, harmonic gains, frequency, and phase during execution. In simulation, we examine this explicit frequency structure alongside the hidden activations of an MLP policy that directly outputs joint targets. The harmonic waveforms change frequency and shape with commanded speed. Dynamic mode decomposition of selected MLP rollouts reveals dominant activation modes near the foot-height oscillation frequency and its second harmonic, showing periodic structure without an explicit Fourier generator. On a Unitree Go2, the simulation-trained harmonic controller records a provisional onboard-estimated peak speed of 3.67 meter per second and carries added loads up to 5.883 kilogram in separate trials.

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

A Trainable CPG Framework for Quadruped Locomotion

cs.RO ·2026-10-27 ·Xiyan Liu, Yide Liu, Guoyong Mao, Shaoxing Qu
similarity 0.69
Abstract

We present CPG-ENN, a trainable quadruped locomotion framework that combines explicit neural coordination with learned motion realization. A symmetry-based eight-neuron central pattern generator (CPG) supplies gait rhythms, while a pretrained, leg-shared execution neural network (ENN) maps rhythmic signals and trajectory parameters to joint-angle references without online inverse kinematics. A single feedback policy modulates six physically interpretable trajectory variables. The controller tracks planar velocity and yaw-rate commands across walk, trot, pace, bound, and pronk without gait-specific learned controllers or transitionspecific rewards. Simulation yields 99.39% transition success across all 20 directed gait pairs and all source-target speed combinations from {0.5, 1.0, 1.5, 2.0} m/s. Ablations show high cross-gait transition feasibility without transition exposure; exposure mainly refines gait acquisition and velocity transients. Comparisons with AllGaits and Walk These Ways demonstrate accurate gait-speed regulation, and Unitree Go2 experiments validate five gaits and their transitions.

0.21

Learning Structured Locomotion References for Optimization-Based Whole-Body Control

cs.RO ·2026-10-17 ·Ömer Tarık Banuş, Uluç Saranlı, M. Mert Ankaralı
similarity 0.67
Abstract · 8 pages, 6 figures

Quadruped locomotion requires coordinating body motion,contact forces, foothold placement, and gait timing. We present a hierarchical controller in which reinforcement learning adapts these structured locomotion references while a gait scheduler, reactive footstep planner, and whole-body impulse controller retain responsibility for high-frequency execution. The model-based backbone can sustain a nominal trot independently, allowing the policy to focus on when and how to modify an already functional locomotion controller. We train the complete hierarchy in a vectorized controller-in-the-loop environment using a six-direction disturbance curriculum. Under a common simulator and evaluation protocol, the proposed controller achieves 77.29% mean survival across the tested disturbance grid, compared with 50.35% for the model-based reference controller. Training-time channel ablations identify adaptive foothold placement as the largest marginal contributor to grid survival and reveal direction-dependent effects of gait-rate adaptation. Together, these results demonstrate the viability of the proposed hierarchical controller architecture for integrating learned adaptation with optimization-based whole-body control through structured locomotion references.

0.11

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.66
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Actuator Dynamics Curricula for Narrow-Viability Tasks in Legged Robot Learning

cs.RO ·2026-09-08 ·Kousheek Chakraborty, Chandan K. Rajendra, Ayham Alharbat, Abeje Y. Mersha
published similarity 0.65
Abstract · Accepted at 2026 Conference on Robot Learning (CoRL)

Reinforcement learning has produced capable controllers across a broad range of legged-robot tasks, but a subset of these tasks fail to converge under standard training: those for which most exploration trajectories terminate before producing useful gradient signal. To address such tasks we introduce the \emph{Actuator Dynamics Curriculum}, a procedure that initializes joint stiffness at a high value and anneals it toward the system-identified value as completed episode lengths grow. Using a cart-pole system as a representative example, we show that higher closed-loop joint natural frequency under critical damping enlarges the viability kernel of the underlying Markov Decision Process, increasing the fraction of initial states from which the task is feasible. We validate the kernel monotonicity on the cart-pole and apply the curriculum to a quadrupedal-to-handstand transition on the Boston Dynamics Spot, a narrow-viability task where training under fixed identified stiffness plateaus at a policy that never completes the transition. The trained policy executes the transition in simulation across 10 seeds and transfers to hardware. More broadly, our results suggest that simulated actuator dynamics is a useful axis along which to design curricula for tasks in which exploration is bottlenecked by termination conditions rather than by reward signal.

0.34

Around the World: Unified Learned Locomotion on a 270 g Continuous-Rotation Quadruped

cs.RO ·2026-10-02 ·Arturo Flores Alvarez, Nathan Lintu, Dennis Hong
similarity 0.65
Abstract · 13 pages, including appendices. Project website: https://submissionreview.github.io/around-the-world/

Closed-loop learned locomotion is established on commercial quadrupeds but remains uncommon at the sub-kilogram scale. Continuous-rotation legs give MiNI-Q, a 270 g quadruped, access to supporting configurations on either side of the body. We exploit this range with a single posture-conditioned reinforcement-learning policy that runs entirely onboard. A continuous joint-space reference on the torus $T^8$ and its gravity-conditioned transformation connect upright walking, inverted walking, and landing recovery without state machines or phase switching. Coordinated posture and release curricula train this behavior family; identified actuation, cross-engine validation, and embedded execution support hardware transfer. The same sub-100k-parameter network tracks forward velocity with RMSE of 0.037 m/s upright and 0.050 m/s inverted, resumes walking in 24 of 30 release trials, and operates with four interchangeable foot geometries across four indoor surfaces. Hardware experiments and simulation ablations connect these capabilities to the representation, conditioning, and training choices that exploit the platform's motion range. Demonstration videos and supplementary material are available on the project website: https://submissionreview.github.io/around-the-world/.

0.33

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.63
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

cs.RO ·2026-10-14 ·Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim +3 more
top venue similarity 0.63
Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

0.38

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.63
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22