CS Paper Radar

MS-RFD: Multi-Signal Release Frame Detection in Hammer Throw from Reconstructed 3D Trajectories

Ahmed Endris Hasen, Nikolaos Passalis, Tomi Vanttinen, Jenni Raitoharju

cs.CV ·submitted 2026-09-16 07:38 UTC · v1

Abstract

Recent advances in artificial intelligence and computer vision are reshaping sports performance analysis by enabling automated detection, tracking, and performance analysis. In hammer throw, performance is strongly determined by the kinematic conditions at release, particularly release speed, release angle, and release height. However, identifying the release instant from video typically requires manual frame-by-frame inspection, which is subjective and cumbersome in real-world training scenarios. In this paper, we present a fully automatic multi-signal release frame detection (MS-RFD) method for hammer throw using reconstructed 3D hammer trajectories. The proposed method integrates four complementary kinematic signals: speed dynamics, angular velocity transition, radial distance relative to the rotation center, and post-release trajectory linearity. These signals are fused to score and verify candidate release frames. MS-RFD is evaluated through the throwing-distance estimation error obtained from the release parameters estimated at the detected frame. An ablation study analyzes the contribution of each signal and compares alternative candidate selection strategies. The results show that speed dynamics and radial expansion provide the strongest signals for release frame detection, while angular velocity and post-release linearity provide smaller refinements.

Comment
6 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Event Detection in Table Tennis Videos using 2D Keypoints

cs.CV ·2026-10-06 ·Rainer Lienhart, Daniel Kienzle, Shin'ichi Satoh, Anastasiia Bilinska
similarity 0.61
Abstract · Accepted at the 9th International ACM Workshop on Multimedia Content Analysis in Sports

This paper addresses the challenge of automatic, frame-accurate event detection in table tennis videos. Current methods for estimating 3d ball trajectories and ball spin typically require that key events, such as ball-racket contacts, have already been identified in advance. This requirement makes it difficult to apply these methods to longer, unedited video recordings. To overcome this limitation, we propose EventNet, a two-stage pipeline to detect key events: (1) 2d keypoints are extracted of the upper-body poses for both players, table corners and ball center. A small keypoint transformer combines them into a compact representation that is robust to changes in viewpoint, lighting, and background clutter. (2) The temporal sequences of these frame-based representations are processed by a transformer encoder that predicts two time-to-event values for each frame, indicating how close the current frame is to the next and previous ball-racket contact. One novelty is a new, temporal cosine-like target signal. Furthermore, we introduce viewpoint augmentation via 3D reprojection and frame-rate augmentation to improve robustness and generalization. Our extensive ablation study gives deeper insights into the importance of various architectural and training aspects. Experimental results show that the proposed approach achieves an F1 score of 91.16% and a mean frame deviation between ground truth and predicted frame of 0.42 on the Latte-MV dataset and 73.08% / 1.16 on the challenging TTHQ dataset. Overall, our work demonstrates that 2d keypoint-based temporal modeling with our EventNet architecture is a promising and practical approach for automatic event detection in table tennis videos.

0.15

BMASH: Ball-Motion-Aware Soccer Header Spotting

cs.CV ·2026-09-30 ·Ahmed Endris Hasen, Muhammad Shahzad Khan, Nikolaos Passalis, Jenni Raitoharju
similarity 0.58
Abstract · 9 pages, 4 figures, MMsports

Recent advances in computer vision have made broadcast sports videos increasingly useful for event analysis, performance assessment, and player-safety applications. In soccer, however, header spotting remains a challenging problem due to the subtle and short-lived nature of header events. This paper focuses on soccer header spotting: identifying moments in broadcast videos where the ball contacts a player's head. We first adapt and evaluate Video Swin as a strong action-recognition baseline for this task, and then introduce BMASH, a ball-motion-aware fusion framework that integrates detector-derived ball features. BMASH combines Video Swin action representations with ball-presence and motion features from frame-level soccer-ball detection, integrating player-action context with ball dynamics to distinguish headers from visually similar events. We evaluate BMASH using game-level splits with separate test matches and rotating validation folds, considering both centered-window classification and continuous full-video spotting. Results show that Video Swin provides a strong baseline for header spotting, while BMASH improves clip-level AP and ROC-AUC over the corresponding Video Swin baseline. In continuous full-video spotting, BMASH achieves a comparable event-level F1-performance with a different precision--recall trade-off.

0.23

Detecting Common Golfing Faults Using AI and Video-Derived Biomechanical Features

cs.LG cs.AI ·2026-11-08 ·Oliver Martin, Jeff Clark, Nawid Keshtmand
similarity 0.58
Abstract

Understanding how an athlete moves can improve both technique and safety, yet outside the laboratory technique is still assessed by eye. We present a pipeline that detects named golf swing faults from ordinary video, without markers or calibration. Instead of learning end to end, it tracks body pose and the clubhead in a body-centered frame, and classifies the biomechanical quantities a coach would measure, such as the height of the clubhead above the swing plane, with shallow boosted trees. We demonstrate the approach on two common faults, coming over-the-top (OTT) and early-extension (EE). On 160 swings and 143 swings from public sources it detects OTT and EE with a cross-validated ROC-AUC of 0.975 and 0.911 respectively. Because every feature is a biomechanical quantity a coach already uses, measured at a known phase of the downswing, each decision can be traced to the signals and the moments of the swing that drove it. The signals the model relies on most are the same ones a coach checks when diagnosing these faults. The pipeline processes phone video on a consumer laptop in seconds, so it could feasibly be developed into an app for golfers of all abilities and extended to other sports in which technique is judged against a biomechanical reference.

0.27

Throwing4: Phase-Aware Pose Modeling for Throw-Distance Prediction in Elite Athletics

cs.CV ·2026-10-12 ·Bikash Kumar Badatya, Kartike Tiwari, Jyotirmoy Amin, Ravi Hegde
published similarity 0.55
Abstract · Accepted for publication in Sports Engineering

Elite athletics throwing provides a structured biomechanical action sequence together with an objective continuous outcome, namely throw distance, making it a suitable setting for performance-oriented sports analytics. In this work, we investigate whether explicit phase alignment of pose dynamics improves throw-distance prediction under realistic broadcast conditions. To support this study, we curate Throwing4, a dataset of 500 elite throwing clips spanning javelin, discus, hammer, and shot put, with corresponding two-dimensional pose sequences, frame-level phase annotations, and official distance labels. We formulate throw-distance prediction from broadcast-derived pose as a regression problem and compare full-sequence modeling against a phase-conditioned approach that partitions each attempt into four technique stages and fuses phase-specific motion representations. Experiments across multiple graph-based pose encoders show a consistent reduction in prediction error when phase structure is incorporated, indicating that phase-aligned modeling provides a more stable representation than treating the entire motion as an unstructured sequence. These findings suggest that explicit biomechanical phase information is a useful inductive prior for pose-based performance modeling in elite athletics throwing. Beyond score prediction, the dataset and protocol provide a basis for future work on fine-grained technique analysis, interpretable sports analytics, and robust modeling from broadcast video.

0.31

MuyBridge: Mobile Human Center-of-Mass Estimation from Monocular Video via Sparse Fusion

cs.CV ·2026-09-02 ·Aidan Bradshaw, Marco Giordano, David Rode, Andreas Habersack, Elif Basokur +6 more
code/data similarity 0.55
Abstract

The 3D center of mass (CoM) is a primary quantity in the biomechanical analysis of sport, rehabilitation, and clinical movement, yet existing 3D pose tracking, mesh recovery, and multi-view triangulation methods either optimize 3D keypoint accuracy without anatomical constraints or carry compute and capture infrastructure too heavy to deploy where CoM tracking is most useful. As a result, the metric CoM remains difficult for coaches and movement analysts to measure from a single camera where athletes train and compete. In this work, we introduce MuyBridge, an on-device system that estimates the athlete's segmental center of mass trajectory from a single phone camera video stream. MuyBridge couples a compact 2D pose network and a distilled single-step monocular depth network through an analytic metric fusion that uses anatomical and physical priors to anchor the metric CoM, requiring no 3D or task-specific supervision. Evaluated on the athletic movements of AthletePose3D (running, track and field, and figure skating), MuyBridge achieves 33-41 mm vertical CoM error and 2.3-6.6% absolute-relative range error (AbsRel) under a one-time calibration, and produces CoM estimates at the 63 FPS pose-estimation rate using asynchronous 2.86 Hz depth updates on iPhone 15. Code is available at: https://github.com/Abradshaw1/Muybridge

0.34

Monocular Badminton Speed Estimation with Air Drag and Court Geometry

cs.CV cs.MM ·2026-10-05 ·Diwen Huang, Sarvesh Madullapalli, Ishan Pendyala, Oliver Chen, Kevin Li +1 more
similarity 0.55
Abstract

A single camera cannot distinguish between a slowly moving object nearby and a rapidly moving object in the distance without additional information. For a shuttlecock, air drag provides a strong deceleration cue that can be combined with known court geometry. We fit a gravity-and-drag trajectory to smartphone video and compare a free monocular fit with a fit constrained to cross the net plane. Camera calibration uses court lines, and the trajectory is fitted to observed shuttle positions and frame timestamps by robust nonlinear least squares. We evaluated 51 badminton shots from two recording sessions, spanning drop shots, drives, half-smashes and smashes. The net-plane fit reduced the median absolute speed difference from a drag-based stereo reference from 13.3% to 8.6%. A second reference, obtained by differentiating triangulated positions without a drag model, also gave a smaller median difference for the net-plane fit. The results support combining court geometry with flight dynamics for badminton speed estimation from a single camera.

0.27

A 3D Pose-Based Ensemble Framework for Cricket Shot Classification and Automated Biomechanical Analysis

cs.CV cs.AI ·2026-09-22 ·Sourav Shome, M. D. Ashiquzzaman Rahad, Rameswar Debnath
similarity 0.53
Abstract · 6 pages, 3 figures, IEEE conference format

Cricket is one of the most celebrated sports world-wide, and technological advancement has become deeply embedded in how the modern game is analyzed and coached. Cricket shot classification and automated performance analysis add a further dimension to this trend. Traditional approaches rely on RGB video features or static images, which are sensitive to environmental variations such as camera angle, lighting, and background clutter, and often fail to capture the underlying biomechanics of batting actions. In this paper, we propose a system to improve cricket coaching that takes raw video data, extracts batsmen from video frames using YOLO, and extracts 3D pose data from video frames using MeTRAbs. The system produces sequential skeletal pose data of 30 body points and captures the biomechanical features of a batsman. As part of the system, we also propose a deep learning ensemble for shot classification of four shots: flick, pull, defense, and drive. The ensemble performed well, compared to existing classification works, achieving 97.68% accuracy. In addition, we analyzed the misclassification rates to identify cases where shots were incorrectly classified and examined their possible causes. Our proposed system allows novice players to obtain useful feedback, such as important joint angles relative to expert batsmen, which can also be useful for injury prevention. The shot classifier also helps track class-wise shots over time for further analysis. In addition to novice players, coaches can use the system for player evaluation.

0.19

Comprehensive Evaluation of Monocular and Multi-view 3D Human Pose Estimation Models for Fitness Exercise Analysis

cs.CV ·2026-11-02 ·Néstor Ortega, Agustín Salgado, Javier Sánchez
similarity 0.52
Abstract · 24 pages, 11 figures, 7 tables

Three-dimensional human pose estimation has become a fundamental component of computer vision systems for sports analytics, rehabilitation, and motion understanding. Although recent deep learning approaches have achieved remarkable accuracy on standard benchmarks, their performance under realistic sports scenarios remains insufficiently studied. Furthermore, the trade-offs between recent monocular and multi-view approaches, as well as the benefits of post-processing techniques for improving temporal consistency, have not been systematically evaluated on fitness-oriented datasets. This paper evaluates recent state-of-the-art 3D human pose estimation methods on Fit3D, a dataset of synchronized multi-view recordings of a wide variety of fitness exercises with accurate ground-truth annotations. We study two recent monocular lifting approaches, TCPFormer and PoseMamba-L, and a multi-view model, MVGFormer, under a unified evaluation protocol. To investigate the influence of the input data, monocular methods are evaluated using ground-truth keypoints and detections generated by recent 2D pose estimators, RTMPose and YOLO-Pose. Additionally, we analyze the effectiveness of three temporal filters for reducing prediction jitter while preserving motion dynamics. Experimental results provide a detailed comparison of accuracy, temporal consistency, and robustness to imperfect 2D detections across the evaluated methods. Our analysis highlights the impact of detector quality on lifting-based approaches, compares transformer- and state-space-based temporal architectures, and discusses the practical trade-offs between monocular and multi-view systems for fitness motion analysis. Our results show that 2D detection quality, temporal modeling, and post-processing must be considered jointly in pose estimation pipelines for exercise analysis.

0.25