CS Paper Radar

Monocular Badminton Speed Estimation with Air Drag and Court Geometry

Diwen Huang, Sarvesh Madullapalli, Ishan Pendyala, Oliver Chen, Kevin Li, William Wang

cs.CV cs.MM ·submitted 2026-10-05 22:09 UTC · v1

Abstract

A single camera cannot distinguish between a slowly moving object nearby and a rapidly moving object in the distance without additional information. For a shuttlecock, air drag provides a strong deceleration cue that can be combined with known court geometry. We fit a gravity-and-drag trajectory to smartphone video and compare a free monocular fit with a fit constrained to cross the net plane. Camera calibration uses court lines, and the trajectory is fitted to observed shuttle positions and frame timestamps by robust nonlinear least squares. We evaluated 51 badminton shots from two recording sessions, spanning drop shots, drives, half-smashes and smashes. The net-plane fit reduced the median absolute speed difference from a drag-based stereo reference from 13.3% to 8.6%. A second reference, obtained by differentiating triangulated positions without a drag model, also gave a smaller median difference for the net-plane fit. The results support combining court geometry with flight dynamics for badminton speed estimation from a single camera.

Closest papers

Nearest neighbours by meaning across the whole index.

Volley3D: Unified 3D Full-Sequence Reconstruction from Monocular Broadcasts

cs.CV ·2026-10-28 ·Noâm Boussouf, Adrien Maglo, Mohamed Chaouch, Hideo Saito
similarity 0.64
Abstract · 8 pages + 10 pages of supplementary. Videos available on the project webpage: noambsf.github.io/Volley3D

3D reconstruction from single-view sports broadcast is a pivotal capability for automated analytics and immersive AR/VR replays, yet notoriously ill-posed due to difficult-to-calibrate moving cameras and depth ambiguity. Unlike widely studied racket sports, team sports such as volleyball feature unpredictable multi-contact sequences and high altitude jumps. These dynamics categorically invalidate the standard planar projection assumptions relied upon by existing methods. To resolve these limitations without 3D training supervision, we propose a complete, physics-grounded pipeline tailored to monocular broadcast volleyball. First, we include a correction module to the perspective drift induced by ground-plane projection by coupling temporal jump spotting with Newtonian interpolation for 3D player placement. Second, for 3D ball trajectory estimation, we design a dedicated sub-trajectory segmentation architecture alongside a collision-matching algorithm. By anchoring physical equations to reconstructed 3D hand vertices, we lift noisy ball 2D detections into a spatiotemporally coherent 3D scene. Evaluations on multi-camera benchmarks demonstrate our approach significantly reduces 3D spatial drift compared to 2D-reprojection baselines.

0.28

Event Detection in Table Tennis Videos using 2D Keypoints

cs.CV ·2026-10-06 ·Rainer Lienhart, Daniel Kienzle, Shin'ichi Satoh, Anastasiia Bilinska
similarity 0.61
Abstract · Accepted at the 9th International ACM Workshop on Multimedia Content Analysis in Sports

This paper addresses the challenge of automatic, frame-accurate event detection in table tennis videos. Current methods for estimating 3d ball trajectories and ball spin typically require that key events, such as ball-racket contacts, have already been identified in advance. This requirement makes it difficult to apply these methods to longer, unedited video recordings. To overcome this limitation, we propose EventNet, a two-stage pipeline to detect key events: (1) 2d keypoints are extracted of the upper-body poses for both players, table corners and ball center. A small keypoint transformer combines them into a compact representation that is robust to changes in viewpoint, lighting, and background clutter. (2) The temporal sequences of these frame-based representations are processed by a transformer encoder that predicts two time-to-event values for each frame, indicating how close the current frame is to the next and previous ball-racket contact. One novelty is a new, temporal cosine-like target signal. Furthermore, we introduce viewpoint augmentation via 3D reprojection and frame-rate augmentation to improve robustness and generalization. Our extensive ablation study gives deeper insights into the importance of various architectural and training aspects. Experimental results show that the proposed approach achieves an F1 score of 91.16% and a mean frame deviation between ground truth and predicted frame of 0.42 on the Latte-MV dataset and 73.08% / 1.16 on the challenging TTHQ dataset. Overall, our work demonstrates that 2d keypoint-based temporal modeling with our EventNet architecture is a promising and practical approach for automatic event detection in table tennis videos.

0.15

MuyBridge: Mobile Human Center-of-Mass Estimation from Monocular Video via Sparse Fusion

cs.CV ·2026-09-02 ·Aidan Bradshaw, Marco Giordano, David Rode, Andreas Habersack, Elif Basokur +6 more
code/data similarity 0.59
Abstract

The 3D center of mass (CoM) is a primary quantity in the biomechanical analysis of sport, rehabilitation, and clinical movement, yet existing 3D pose tracking, mesh recovery, and multi-view triangulation methods either optimize 3D keypoint accuracy without anatomical constraints or carry compute and capture infrastructure too heavy to deploy where CoM tracking is most useful. As a result, the metric CoM remains difficult for coaches and movement analysts to measure from a single camera where athletes train and compete. In this work, we introduce MuyBridge, an on-device system that estimates the athlete's segmental center of mass trajectory from a single phone camera video stream. MuyBridge couples a compact 2D pose network and a distilled single-step monocular depth network through an analytic metric fusion that uses anatomical and physical priors to anchor the metric CoM, requiring no 3D or task-specific supervision. Evaluated on the athletic movements of AthletePose3D (running, track and field, and figure skating), MuyBridge achieves 33-41 mm vertical CoM error and 2.3-6.6% absolute-relative range error (AbsRel) under a one-time calibration, and produces CoM estimates at the 63 FPS pose-estimation rate using asynchronous 2.86 Hz depth updates on iPhone 15. Code is available at: https://github.com/Abradshaw1/Muybridge

0.34

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.56
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

Field Converter: Geometry-Initialized Temporal Residual Refinement for World-Grounded Player Pose Estimation from Soccer Broadcasts

cs.CV ·2026-09-09 ·Simon Khan, Laurent Gajny, Jennyfer Lecompte, Sébastien Laporte
code/data similarity 0.56
Abstract · 11 pages, 5 figures. Code available at https://github.com/KhanSimon/field_converter

Recovering 3D human pose from monocular sports broadcasts remains challenging when players must be localized in a shared metric world coordinate system rather than only reconstructed relative to their own body. We introduce Field Converter, a geometry-initialized temporal residual framework for world-grounded 3D player pose estimation from calibrated soccer broadcasts. Our method first uses camera and pitch geometry to initialize the player root through ray-ground intersection, then predicts a temporal residual correction from pose, image, camera, and geometric cues. On match-disjoint evaluation sequences, residual refinement reduces root error from 49cm with geometry alone to 14cm with a frame-wise MLP and 10cm with a TCN, while a Transformer achieves a comparable 11cm. The resulting world-space MPJPE reaches 13.2cm, and ablations show that residual prediction clearly outperforms direct global-root regression while temporal context matters more than the specific temporal backbone. Failure analysis further identifies airborne motion as the main limitation of the ground-based geometric initialization.

0.37

PL-NBA: A Possession-level Universal Basketball Video Dataset Supporting Multiple Visual Understanding Tasks

cs.CV ·2026-08-20 ·Yunhao Zhao, Haoying Sun, Jiarui Li, Zhuming Wang, Ya Jing +3 more
benchmark similarity 0.55
Abstract

Visual understanding in sports has emerged as a hot topic in computer vision in recent years. Most existing basketball video datasets adopt single action or activity as sample, which can neither preserve the temporal continuity of game events nor support complex tasks such as action anticipation. To address this issue, this paper constructs the first possession-level basketball video dataset (PL-NBA), in which each sample is composed of a complete NBA offensive possession. Collected from 60 NBA games, PL-NBA contains 11,000 valid offensive possession clips and 31,567 annotated events with player names, captions, event types and timestamps. Each video clip includes multiple events and preserves the continuity of events, which is helpful for analysis of tactic. Experiment is conducted on multiple visual understanding tasks, including event recognition, video captioning, temporal action localization and action anticipation. Experimental results show that existing methods achieve limited performance on above four tasks, demonstrating that PL-NBA is a challenging benchmark for sports video understanding.

0.30

Learning Human Sports Motion Feasibility via Quantile Regression on Tracking Data

cs.AI ·2026-10-26 ·Marc Gutiérrez-Pérez, Antonio Agudo
code/data similarity 0.55
Abstract

We study time-to-arrival (TTA) in sports: the shortest plausible time a player needs to reach an arbitrary location on the pitch given their current kinematic state, estimated as the lower envelope of observed locomotion times. Rather than modeling space ownership through position density estimation or closed-form physics-based models, we cast TTA as a conditional quantile regression problem, estimating the lower quantile of locomotion time so the model learns a player's lower-envelope arrival time. We train the model on optical tracking data from all 64 matches of the PFF FC FIFA World Cup 2022 dataset, and evaluate a lightweight multilayer perceptron against six player-motion models from the literature, re-expressed as TTA predictors, and a learned reachable- hull baseline. Across our evaluation metrics, the MLP consistently outperforms every physics-based baseline. To probe the generality of the learned locomotion model, we further evaluate it on basketball tracking data and a single-game NFL tracking dataset, analyzing the transferability of player motion dynamics across sports. Our project is available at https://github.com/mguti97/TTA-Quantile.

0.62

MS-RFD: Multi-Signal Release Frame Detection in Hammer Throw from Reconstructed 3D Trajectories

cs.CV ·2026-09-16 ·Ahmed Endris Hasen, Nikolaos Passalis, Tomi Vanttinen, Jenni Raitoharju
similarity 0.55
Abstract · 6 pages, 4 figures

Recent advances in artificial intelligence and computer vision are reshaping sports performance analysis by enabling automated detection, tracking, and performance analysis. In hammer throw, performance is strongly determined by the kinematic conditions at release, particularly release speed, release angle, and release height. However, identifying the release instant from video typically requires manual frame-by-frame inspection, which is subjective and cumbersome in real-world training scenarios. In this paper, we present a fully automatic multi-signal release frame detection (MS-RFD) method for hammer throw using reconstructed 3D hammer trajectories. The proposed method integrates four complementary kinematic signals: speed dynamics, angular velocity transition, radial distance relative to the rotation center, and post-release trajectory linearity. These signals are fused to score and verify candidate release frames. MS-RFD is evaluated through the throwing-distance estimation error obtained from the release parameters estimated at the detected frame. An ablation study analyzes the contribution of each signal and compares alternative candidate selection strategies. The results show that speed dynamics and radial expansion provide the strongest signals for release frame detection, while angular velocity and post-release linearity provide smaller refinements.

0.31