CS Paper Radar

MiX: Micro-Inverted-Scaling for End-to-End Low-Bit Vision-Language Model Acceleration

Yuan Liao, Jae-sun Seo

cs.AR cs.CV ·submitted 2026-09-17 04:31 UTC · v2
top venue

Abstract

The deployment of Vision-Language Models (VLMs) on edge devices is severely bottlenecked by memory bandwidth, necessitating aggressive sub-8-bit quantization. Since edge accelerators are strictly constrained by area and power, they require end-to-end quantized models. However, the extreme dynamic range gap between multi-modal tokens causes standard block formats to suffer "microscaling collapse," where a single massive outlier hijacks the shared exponent, underflowing surrounding elements and destroying attention maps. To break this bottleneck, we propose Micro-Inverted-Scaling (MiX), a novel format that mathematically inverts the microscaling paradigm: rather than grouping multiple mantissas under one shared exponent, MiX groups private, per-element exponents under a single shared mantissa. To handle asymmetric VLM outlier topologies, we introduce an adaptive dual-format (MiX-MX) inference framework. By algebraically factoring out the shared MiX mantissa, this framework maps to a custom accelerator, replacing multipliers with efficient shifters. Evaluated end-to-end on multiple VLMs, our 4.5-bit MiX formulation exhibits equivalent or superior accuracy on multi-modal benchmarks compared to NVFP4. Simultaneously, the MiX accelerator delivers a 25% improvement in area efficiency over the NVFP4 baseline and a 2.3-4.5x speedup with 1.4-2.9x energy reduction across models compared to the state-of-the-art accelerator Focus, proving the inverted-scaling datapath is physically superior for efficient VLM deployment.

Comment
Accepted to the 59th IEEE/ACM International Symposium on Microarchitecture (MICRO 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

VisionMX: Unlocking Microscaling Post-Training Quantization for Vision Models

cs.CV ·2026-10-02 ·Elad Dror Cohen, Ofir Gordon, Lior Dikstein, Idan Achituve, Hai Victor Habi
similarity 0.71
Abstract

Microscaling (MX) formats are emerging as a hardware-supported approach to efficient training and inference. They combine low-precision elements with shared block scales, but their impact on vision models remains underexplored. We systematically investigate post-training MX quantization across vision models and tasks. An analysis of direct conversion identifies three sources of error: block-scale representation, the poor alignment of some small convolutional weight tensors with nonuniform element grids, and the underuse of signed codes by nonnegative activations. These findings motivate VisionMX, a post-training MX quantization method that optimizes bounded weight rounding and applies a foldable affine correction to activations. We evaluate VisionMX across image classification, object detection, semantic segmentation, and low-light image enhancement using several MX-style formats. It improves on direct conversion and the evaluated post-training quantization baselines, with the largest performance recoveries in architectures most sensitive to MX conversion

0.18

DualQuant: Dual-scale Calibration-free Weight-and-Activation Quantization for LLMs

cs.LG cs.AI ·2026-10-09 ·Mahsa Salmani, Sayeh Sharify, Hesham Mostafa
similarity 0.70
Abstract

Low-bit inference on accelerators with native 4-bit support requires quantizing both weights and activations to realize the full throughput gains these formats provide. While post-training weight quantization has been extensively studied, activation quantization remains considerably more challenging and typically requires calibration data. In this work, we introduce DUALQUANT, a dual-scale, calibration-free post-training quantization framework that directly minimizes the weight-reconstruction Mean Squared Error (MSE) and, as an immediate by-product, yields per-channel activation rescalings prior to activation quantization. Our key observation is that the scaling factors obtained by minimizing weight-reconstruction error provide effective activation rescalings, enabling competitive activation quantization without calibration data. We formulate DUALQUANT as a non-differentiable weight-reconstruction problem and develop an efficient solver based on variable splitting and block coordinate descent, where each subproblem admits a closed-form update. DUALQUANT provides a unified algorithm supporting a wide range of formats, including the full MX family and NVFP4. To our knowledge, DUALQUANT is the first dual-scaling method to formally support MX and NV block formats. Across Llama and Qwen models evaluated on WikiText-2, C4, and zero-shot downstream tasks, DUALQUANT matches or exceeds the accuracy of calibration-based SmoothQuant across most models and formats, and substantially outperforms calibration-free baselines, with large gains for MX and NV block formats. We validate these gains with a real packed W4A4 inference path for Llama-3.1-8B on an RTX 4090. The resulting implementation closely matches the accuracy of fake quantization while delivering up to 2.61x memory reduction and up to 2.46x throughput speedup over BF16.

0.44

ProQuant: Progressive Quantization-aware Training for Edge MLLMs

cs.CV cs.CL ·2026-11-05 ·Yufei Xue, Yushi Huang, Jiawei Shao, Pingcheng Dong, Yonghao Tan +3 more
code/data similarity 0.70
Abstract

Multi-modal large language models (MLLMs) with impressive perception and understanding capabilities will enable a range of downstream applications. However, their substantial computational and memory requirements hinder the real-world implementation, particularly for resource-constrained edge devices. Quantization has emerged as an effective solution for deploying large models. While post-training quantization (PTQ) successfully retains the performance at moderate bit-width (e.g., W8A8), it suffers from severe performance degradation under low-bit quantization (e.g., W4A8), especially for small-scale models that are more suitable for edge deployment. In this paper, we propose ProQuant, a novel weight-activation quantization-aware training (QAT) framework tailored for low-bit MLLMs. First, to align the limited finetuning dataset distribution with the pretrained dataset distribution, we propose a self-relabeling (SRL) scheme to resample the responses of the open-source multimodal dataset. Second, we are the first to take a decoupled view of multi-modal (MM) understanding and language modeling abilities. We propose a progressive block activation (PBA) mechanism to prioritize the MM understanding recovery. We also introduce a vision-sensitive factor $\vecτ$ that effectively identifies the MM-critical layers. Extensive experiments across various benchmarks, covering models with 2B-8B parameters, show that ProQuant significantly outperforms existing methods. For example, our W4A8 Qwen3-VL-2B-Instruct improves average accuracy by impressively 6.6% and achieves performance comparable to full precision counterparts with only approximately 1% performance drop. Code is available at https://github.com/yufeixue-ai/ProQuant/.

0.28

MoMoVL: Modality-Aware Adaptive Compression for On-Device Sparsely-Activated Vision-Language Models

cs.CV cs.LG ·2026-11-18 ·Dongkeun Lee, Wonjun Lee
publishedcode/data similarity 0.69
Abstract · 11 pages, 6 figures, Accepted at WSDM 2027 Findings

The rise of the agentic web has been accompanied by growing demand for on-device Vision-Language Models (VLMs) that perform diverse cross-modal web tasks with enhanced privacy and reduced latency. Mixture-of-Experts (MoE) models are widely adopted in modern VLMs for compute-efficient scalability, yet their multi-expert architecture poses deployment challenges due to substantial memory demands. Mixed-precision quantization is an effective compression technique that reduces bit-widths while adapting to the heterogeneous hardware budgets of edge devices, particularly well-suited for MoE due to its inherent structural sparsity, which causes imbalanced importance among experts. While prior work has applied quantization for efficient MoE inference at the edge, we point out that in MoE-based VLMs, the modality-specific characteristics of visual and text tokens further impact expert quantization. To address this issue, we present MoMoVL, a modality-aware adaptive compression framework for MoE-based VLMs that brings vision-language inference within reach of on-device resource budgets. Motivated by our empirical findings on modality-induced disparities across experts, MoMoVL jointly exploits the per-expert activation profile and per-modality quantization sensitivity to guide bit-width assignment. Experimental results show that MoMoVL improves the accuracy-compression trade-off relative to state-of-the-art mixed-precision baselines and reduces memory footprint by up to 15.44% with a modest drop in accuracy over its uniform-precision baseline. Our code and data are publicly available at https://github.com/sco-edge/MoMoVL.

0.60

FluxBin: Flexible LUT-based Ultra-low-bit LLM Inference by Algorithm-Kernel Synergy

cs.LG cs.AI ·2026-08-16 ·Qingyao Yang, Runming Yang, He Xiao, Wendong Xu, Junyu Chen +5 more
code/data similarity 0.69
Abstract

While binary quantization theoretically promises extreme compression and acceleration for Large Language Models (LLMs), existing research often overlooks the necessity of specialized hardware kernels, thus failing to unleash the full acceleration potential due to persistent reliance on expensive floating-point arithmetic or runtime dequantization overheads. To bridge this gap, we propose FluxBin (\textbf{F}lexible \textbf{L}UT-based \textbf{U}ltra-low-bit e\textbf{X}ecution with \textbf{Bin}ary bases), an algorithm-kernel co-design that synergizes post-training quantization with a highly optimized CUDA kernel. Algorithmically, we introduce Decoupled Row-Column Binary Decomposition to enhance representational capacity while maintaining hardware efficiency, complemented by a Hessian-guided saliency-aware hybrid bases that preserve critical information. At the kernel level, we implement a Lookup Table Building Approach with Scale Fusion to reduce floating-point arithmetic, featuring a Virtual Columnar Mapping that transforms irregular, sparse, and salient matrices into dense execution. Extensive evaluations demonstrate FluxBin achieves up to $5.92\times$ speedup and $10.19\times$ energy savings across diverse model architectures, delivering comparable accuracy to heavily fine-tuned methods. This effectively enables the deployment of 70B-scale models on one single A100 GPU with a $4\times$ memory reduction. Code is available at https://github.com/nicyyyy/FluxBin.

0.24

MIAO: Microscaling Intermediate Accumulation Optimization

cs.AR ·2026-11-15 ·Chloe Wong, Nicolas Rakela, Man Shi, Hansung Kim, Ruohan Richard Yan +2 more
similarity 0.68
Abstract · 18 pages, 7 figures, 7 tables

Microscaling (MX) quantization enables lower-precision large language model (LLM) inference with limited accuracy degradation, reducing memory requirement and multiplication cost. However, despite reduced operand precision, accumulation is often retained at high floating-point precisions, leaving a substantial hardware cost that operand quantization alone does not address. In particular, systolic arrays, as used in tensor accelerators such as Google TPU and AWS Trainium, distribute accumulation across distinct processing elements but conventionally use uniform accumulator precision throughout the array. This spatial organization offers an opportunity to reduce hardware cost by tailoring precision to individual accumulation stages. In this work, we present MIAO, a hardware-software co-design framework that jointly selects product precision and stage-dependent accumulator widths to minimize hardware area and energy cost under an end-to-end perplexity constraint. MIAO first calibrates MX block-scale shifts to reduce intermediate magnitudes while preserving operand quantization accuracy, then assigns narrower accumulators to earlier stages and progressively wider accumulators to later stages. To efficiently explore the resulting design space, MIAO combines hardware cost estimates derived from logic synthesis with a calibrated accuracy predictor to identify promising precision configurations, then validates the accuracy of promising candidates through bit-exact end-to-end LLM evaluation. Across MXFP8, MXFP6, and MXFP4, MIAO reduces processing element (PE) array area by up to 38.7% and energy by up to 36.1% relative to the all-BF16 accumulation baseline, with at most 1.60% additional perplexity degradation over operand-only MX quantization across six LLMs.

0.25

Llama-Mobile: Efficient 2.7-Bit Quantization of VLMs

cs.CV cs.LG ·2026-08-21 ·Luka Ribar, Jeevan Bhoot, Douglas Orr
similarity 0.67
Abstract

Deploying vision-language models (VLMs) on mobile devices is challenging due to their significant memory and compute requirements. We present a framework for quantizing VLMs for efficient inference on resource-constrained hardware. Our approach combines a quantization pipeline that uses the model itself to generate training data and does not require access to the training setup, with a novel 2.7-bit-per-parameter format supporting efficient execution on Arm CPUs. We validate our approach by compressing the Llama 3.2 11B Vision Instruct model to 3.7 GB with 8-bit activations, preserving strong performance on a set of standard visual question answering tasks.

0.16

Activation Outliers Matter: Robust Recovery for Quantized Multimodal LLMs

cs.LG ·2026-08-27 ·Tanzila Rahman, Mehran Taghian Jazi, Yunke Peng, Zhuang Ma, Anandharaju Durai Raju +8 more
similarity 0.66
Abstract · 14 Pages, 5 figures, 5 tables

Low-bit quantization offers a promising avenue for reducing the computational and memory demands of Multimodal Large Language Models (MLLMs). Recent hardware support for low-precision formats, ranging from MXFP8 to ultra-low-bit formats such as MXFP4 and HiF4, has accelerated research into efficient MLLM training and deployment. In this work, we present a systematic study of these quantization schemes in representative MLLMs that span both video generation and reasoning tasks. Our analysis shows that MXFP8 achieves near-lossless performance, whereas aggressive 4-bit quantization leads to significant degradation. Through extensive ablations, we identify activation quantization as the primary source of this performance loss, contributing substantially more than weight quantization. Motivated by this observation, we propose Residual Fallback Quantization (RFQ), a lightweight activation reconstruction framework that supplements the primary ulta-low-bit activation representation with an auxiliary quantized residual pathway. By explicitly modeling and compensating for quantization errors, RFQ improves activation fidelity while preserving the efficiency advantages of ultra-low-bit computation. RFQ requires no architectural modifications and incurs negligible computational overhead. Extensive experiments on Wan2.2 and Qwen3-VL demonstrate that RFQ consistently recovers a substantial portion of the performance lost under the quantization of MXFP4 and HiF4, significantly narrowing the gap to BF16 baselines across both generation and 4 reasoning benchmarks. Our findings establish activation quantization as the dominant bottleneck in ultra-low-bit MLLMs and highlight residual-based activation reconstruction as an effective and practical strategy for robust 4-bit deployment.

0.27