CS Paper Radar

Foldable Antenna Array in Space-Air-Ground Integrated Networks: Architectures and Applications

Jikang Deng, Ki-Hong Park, Mohamed-Slim Alouini

eess.SY ·submitted 2026-09-17 10:21 UTC · v1

Abstract

Space-air-ground integrated networks (SAGINs) integrate heterogeneous platforms with different coverage, mobility, and payload constraints, which creates strong demands for flexible antenna architectures. Foldable antenna arrays (FAAs) provide a promising solution by reconfiguring array geometry, antenna positions, and orientations through controllable joints or hinges. However, existing studies on FAAs have mainly considered simple folding configurations and limited deployment benefits, while FAAs' architectures and broader potential for SAGIN remain largely unexplored. In this article, we present the fundamentals and architectures of FAA, including folding mechanisms, foldability levels, and functional capabilities. We then examine FAA applications for ground base stations, low-altitude platforms, high-altitude platforms, and satellites, together with their potential challenges and solutions. Finally, we highlight open issues and future research directions, and provide a case study to demonstrate the FAA-enabled communication performance improvement in SAGIN.

Closest papers

Nearest neighbours by meaning across the whole index.

Rotatable Antenna-Enabled Space-Air-Ground Integrated Networks: Opportunities and Challenges

cs.IT eess.SP ·2026-09-29 ·Yanhua Tan, Beixiong Zheng, Tiantian Ma, Qingjie Wu, Lipeng Zhu +4 more
similarity 0.61
Abstract · This work has been submitted to the IEEE for possible publication

Space-air-ground integrated networks (SAGINs) are expected to support ubiquitous three-dimensional (3D) communication and sensing services in future sixth-generation (6G) wireless networks. However, heterogeneous mobility and service requirements across the space, air, and ground segments challenge fixed-boresight or fixed-sector antennas in supporting wide-area coverage, maintaining directional alignment over time-varying communication links, and flexibly adjusting observation directions for sensing tasks. To address these limitations, non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) technology has emerged as a promising solution by enabling mechanical or electronic boresight adjustment while keeping the antenna positions fixed. This article investigates the roles of RA technology in enabling communication and sensing in SAGINs. Specifically, we first explain how RA boresight control complements platform mobility and supports wide-area coverage, dynamic directional transmission, cross-segment cooperative operation, and cooperative sensing. We then discuss the main design challenges, potential approaches, and future research directions, including channel acquisition and predictive tracking, joint orientation control and access/handover coordination, cross-segment coordination and resource management, as well as deployment tradeoffs and practical implementation. Finally, an RA array prototype and two representative simulation studies are presented to illustrate the feasibility and potential performance gains of RA-enabled SAGINs.

0.22

High-Altitude Platforms Beyond Connectivity: A Survey of Integrated Sensing, Storage, Communication, Computing, and Intelligence

eess.SY ·2026-08-19 ·Haoxiang Luo, Mohamed-Slim Alouini
survey similarity 0.55
Abstract

High-altitude platforms (HAPs) are emerging as persistent middle-layer infrastructures for space-air-ground integrated networks (SAGINs), offering a favorable compromise among coverage, latency, endurance, and deployment flexibility. Their role, however, is evolving beyond communication relaying toward the joint provision of sensing, storage, communication, computing, and intelligence (S^2C^2I). This survey presents a unified HAP-centric perspective on S^2C^2I integration. We first review HAP fundamentals, platform categories, and their principal roles in SAGINs, including wide-area access, relaying, backhaul, edge service, low-altitude aerial coordination, and cross-layer orchestration. We then develop an integrated architecture spanning multi-plane connectivity, payload functional splits, and a cloud-edge-HAP space continuum with hierarchical data, control, computing, and storage loops. The enabling technologies are systematically examined, covering heterogeneous RF, millimeter-wave, terahertz, free-space optical, and hybrid links; sensing payloads and integrated sensing and communication; onboard computing; storage and caching; and AI-based orchestration. We further synthesize standardization progress, open software and datasets, testbeds, field evidence, and a four-level evaluation methodology ranging from component validation to mission-level effectiveness. An emergency-response case study demonstrates that joint S^2C^2I orchestration substantially improves conjunctive service availability while reducing feeder-link traffic. Finally, we identify research opportunities in agentic AI, trustworthy autonomy, goal-oriented semantic operation and digital twins, and sustainable, certifiable, and open HAP-native systems. The resulting synthesis provides a coherent roadmap from platform design to network-wide deployment.

0.43

Half-Slot Link Scheduling for Open GNSS with $x$-Tx $y$-Rx Multibeam Phased Array Antennas

eess.SY ·2026-10-22 ·Huan Yan, Kanglian Zhao, Wenfeng Li, Jinjun Zheng, Ziyu Wang +1 more
similarity 0.55
Abstract · 20 pages and 10 figs

Global Navigation Satellite Systems (GNSSs) are evolving from closed navigation constellations toward open space infrastructure capable of serving extensive spacecraft users. This evolution requires the constellation to support navigation ranging, telemetry (TM) return, and telecommand (TC) delivery for users while preserving its own ranging and communication functions.Existing phased-array payloads onboard BeiDou satellites provide one transmit (Tx) beam and one receive (Rx) beam. Such a configuration was designed mainly for intra-constellation operation, and can become a resource bottleneck when a large number of users share the same link opportunities. Upgrading GNSS satellites to phased-array terminals with $x$-Tx and $y$-Rx beams is therefore a natural enhancement. This paper develops a staged dynamic half-slot link scheduling framework (SDHSS) for open GNSS with $x$-Tx $y$-Rx multibeam phased-array antennas. The framework models navigation, TM, and TC as three different services, reserves the essential ranging and ground-access opportunities required by the GNSS constellation, and then allocates the remaining half-slot beam resources according to current service demand. To support multibeam concurrency, feasible links are selected through dynamic service-layer ordering and beam-copy matching. Simulations based on a BeiDou constellation show that the proposed method protects GNSS baseline operation and provides stronger external navigation, TM, and TC performance than fair contact planning. The results further show that additional Tx and Rx beams can be effectively converted into multi-service capability. This work establishes a link-scheduling approach for extending GNSS from constellation-internal operation to large-scale spacecraft service support.

0.30

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.55
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Hierarchical RIS Association for FR3 Space-Air-Ground Integrated Networks

eess.SP ·2026-10-06 ·Muddasir Rahim, Irfan Azam, Soumaya Cherkaoui
similarity 0.53
Abstract

The growing demand for diverse sixth-generation (6G) applications requires efficient connectivity, seamless service continuity, and extended network coverage. Although terrestrial infrastructures can effectively serve most wireless user equipment (UE), communication reliability may be significantly degraded in remote or blocked environments. To address this challenge, this paper proposes a reconfigurable intelligent surface (RIS)-assisted space-air-ground integrated network (SAGIN) operating in the upper mid-band (FR3) spectrum. The considered network consists of a terrestrial base station (BS), a low Earth orbit (LEO) satellite, multiple terrestrial RISs (TRISs), and unmanned aerial vehicle-mounted RISs (ARISs), where the BS serves as the primary access node, while the LEO satellite provides complementary connectivity when terrestrial links are unavailable or cannot satisfy the required quality-of-service (QoS) requirements. Within this framework, we formulate a hierarchical RIS association problem to maximize the achievable network sum rate under RIS capacity constraints. The resulting optimization problem is a mixed-integer nonconvex problem due to the binary association variables and the coupling among UEs competing for limited RIS resources. To efficiently solve the problem, we develop a hierarchical many-to-one matching-based RIS association framework. Specifically, UEs with satisfactory terrestrial connectivity are first associated with TRISs, whereas UEs that cannot be reliably served by the terrestrial network are subsequently associated with ARISs through the non-terrestrial network. Simulation results demonstrate that the proposed hierarchical association framework significantly outperforms greedy and random association schemes in terms of the achievable network sum rate.

0.24

Pinching Antennas for Next-Generation Wireless Communications: A Network Perspective

eess.SP ·2026-09-15 ·Yanqing Xu, Shan Shan, Yongxu Zhu, Zhiguo Ding, Mugen Peng +1 more
similarity 0.52
Abstract

Pinching antennas enable radiation points to be created and reconfigured along extended waveguides, making the physical locations of wireless transmission and reception controllable after infrastructure deployment. This capability introduces a spatial degree of freedom beyond conventional beamforming and resource allocation, with implications that extend from individual links to network-wide operation. This tutorial develops a network-oriented perspective on pinching-antenna systems. We first review their system architecture, channel characteristics, and fundamental design opportunities. We then examine how radiation-location reconfigurability can support environment-division multiple access by strengthening desired links and suppressing cross-links, and discuss its roles in multi-cell transmission, traffic offloading, and inter-cell cooperation. Moving from instantaneous users to entire service regions, we introduce traffic-aware and geometry-aware designs under a cell-free-inspired multi-waveguide architecture. Representative system models, optimization problems, analytical illustrations, and numerical results are provided to explain the main design tradeoffs and network-level insights. We further discuss generalized physical realizations and representative deployment modes, including standalone, conventional base-station-integrated, and distributed deployments, together with their main implementation considerations. Finally, we identify future research directions involving mobility management, programmable and virtualized radio access, environment knowledge acquisition, AI-native control, low-altitude networks, space-air-ground integration, and integrated sensing and communication. Overall, this tutorial presents radiation locations as configurable network resources and provides a framework for understanding how pinching antennas may reshape future wireless network.

0.50

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.51
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.36

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.50
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18