CS Paper Radar

Radio Frequency Detection and Classification of Microplastics in Water

Jaden Tolbert, Md Saiful Islam, Pingshan Wang

cs.LG ·submitted 2026-09-17 14:51 UTC · v1
unusual

Abstract

Micro- and nano-plastic particles (MPs/NPs) are ubiquitous environmental contaminants whose increasing abundance and potential health impacts have created an urgent need for rapid, label-free detection methods. As particle size decreases to the low-micrometer range, conventional optical and spectroscopic techniques become increasingly challenging because of limited throughput and/or complex sample preparation. In this work, we present a machine learning (ML)-assisted radio-frequency (RF) dielectric spectroscopic cytometry (DiSC) platform for the label-free detection and classification of MPs. Eight types of $ 10 $ μm nominal-diameter MP particles suspended in deionized (DI) water were characterized at four frequencies spanning $ 0.2\text{-}9\text{ GHz} $. The measured alterations in RF scattering parameters (S-parameters), referenced to the carrier medium, were used to train supervised ML models for material classification, including the identification of MPs in mixed samples and saline-water environments. For eight MP classes suspended in DI water, the proposed method achieved macro-average F1-score, precision, and recall values exceeding $ 0.71 $. Furthermore, PET classification performance was largely maintained in saline carrier media containing $3.3\% $ and $ 6.6\% $ sea salt. These results demonstrate the feasibility of ML-assisted RF DiSC for rapid, single-particle MP classification in aqueous environments. Future work will focus on improving classification performance through enhanced RF calibration, increased spectral coverage, larger training datasets, and validation using environmentally aged and biologically contaminated microplastics.

Closest papers

Nearest neighbours by meaning across the whole index.

A multi-level preprocessing and modelling framework for spectral imaging of microplastics

cs.CE stat.CO ·2026-08-18 ·Zina-Sabrina Duma, Tenzin Tsering, Sara Heikkinen, Tuomo Soininen, Tuomas Sihvonen +2 more
publishedunusual similarity 0.53
Abstract

Spectral imaging provides chemically specific and spatially resolved analysis of microplastics, but its routine application is hindered by large data volumes, acquisition artefacts, spectral variability, and misidentification of polymers due to alike spectra. This study proposes a multi-level preprocessing and modelling framework for FT-IR spectral imaging of microplastics that integrates image-level, tile-level, and spectral-level corrections with scalable identification strategies. Image-level variation associated with changing acquisition conditions was done with latent variable selection, while a background-based tile correction reduced illumination-related artefacts. Spectral preprocessing combined baseline correction, smoothing, derivative calculation, normalization, and wavelength selection, and only particle spectra were retained for further analysis to improve computational efficiency. For scalable identification, clustering was applied to particle spectra and spectral library matching was performed on cluster centroids instead of individual pixels. Among twelve evaluated matching strategies, a sign-invariant derivative-based cosine similarity method achieved perfect classification accuracy for polystyrene (PS), polyethylene terephthalate (PET), polyethylene (PE), and polypropylene (PP). The clustering-based workflow also produced more spatially coherent particle maps than direct software-based matching while substantially reducing processing time. The framework was evaluated for supervised classification-based MP indentification. These results show that multi-level correction combined with cluster-centroid spectral matching improves the robustness, efficiency, and interpretability of spectral-imaging-based microplastic identification.

0.46

Multispectral Household Plastic Classification for Recycling Using a Camera Array

eess.IV ·2026-08-23 ·Katja Kossira, Jürgen Seiler, André Kaup
publishedcode/data similarity 0.48
Abstract

Plastic pollution has become a persistent problem in natural ecosystems. Driven by insufficient waste management, limited recycling efficiency, and high costs for recycling, plastic waste in the environment poses significant ecological and health risks. Recycling requires accurate identification of polymer types, but existing optical sorting systems often struggle to distinguish common household plastics. In this work, we present a novel classification approach based on a multispectral imaging system consisting of nine cameras equipped with near-infrared bandpass filters. The system is designed to discriminate the seven most common household plastics. From the resulting multispectral images, we extract the spectral fingerprints and derive features such as intensity differences between specific wavelength pairs and their slopes, as well as false-color image representations. A dedicated preprocessing pipeline aligns and normalizes the data before classification. We recorded a multispectral household plastic database (https://github.com/FAU-LMS/MHPM) and trained four different classifiers Gradient Boosting, Extreme Gradient Boosting, Light Gradient Boosting Machine, and CatBoost. The best-performing model achieves a classification accuracy of 86.7%. The computational runtime is 2.603 μs per pixel, enabling efficient processing of high-resolution images. The entire setup is built from off-the-shelf hardware components, which makes replication straightforward and allows direct integration into industrial sorting pipelines.

0.56

MWIR-4-Plastic: The Identification of Complex End-of-Life Industrial Plastic using Mid-wave Infrared Hyperspectral Imaging and Machine Learning

cs.CV cs.LG ·2026-08-28 ·Elias Arbash, Andréa de Lima Ribeiro, Filipa Simões, Ahmed Jamal Afifi, Aldino Rizaldy +7 more
publishedbenchmarkdatasetcode/data similarity 0.48
Abstract · 15 pages

The automated sorting of shredded black plastics from end-of-life (EOF) industrial waste presents a significant challenge in recycling facilities, primarily due to the limitations of current sensing and analytical approaches. Existing studies predominantly rely on single-point contact-based mid-infrared spectroscopy or laboratory hyperspectral imaging (HSI) setups, which fail to provide the spatially resolved analysis necessary for fast, bulk processing. Moreover, available datasets are laboratory-controlled and focus on intact rather than shredded plastics, hindering further recycling refinement. Black industrial plastics, in particular, are underrepresented, while most classification pipelines depend on manual region selection and rule-based spectral matching, neglecting spatial information and modern deep learning (DL) methods. To address these gaps, we introduce the first publicly available HSI dataset of shredded black plastics from EOF vehicle, comprising four industrial polymers across 13 co-registered RGB, VNIR, SWIR, and MWIR scenes and their segmentation pipeline. We developed a multi-modal spectral-spatial framework that integrates foreground isolation, pixel-wise classification, and object-level majority voting. By adapting advanced hyperspectral transformers from earth observation and incorporating chemometric band selection, we achieve accurate classification of complex black plastics. The study establishes the first comprehensive benchmark using nine processing methods, including chemometric, machine learning, and DL architectures. To ensure reproducibility, the complete dataset and methodologies are publicly released, establishing a benchmark for a hyperspectral object-analysis pipeline in industrial inspection.

0.31

Transmission-Mode Multispectral Imaging for Estimation of Microcystis spp. Cell Concentration and ELISA-Equivalent Microcystin Concentration in Water

eess.IV eess.SP ·2026-11-12 ·J. A. S. T. Jayakody, G. Thilakarathne, G. A. S. L. Ranasinghe, M. C. L. De Silva, K. A. D. S. A. Perera +5 more
unusual similarity 0.47
Abstract · 30 pages, 9 figures, 2 tables. Includes Supplementary Information

Harmful algal blooms dominated by Microcystis spp. threaten freshwater systems through proliferation and microcystin (MC) production. Conventional measurements of cyanobacterial abundance and MC concentration commonly require laboratory processing, specialized instrumentation, or assay reagents. Because MC concentration cannot always be reliably inferred from cell abundance, complementary optical approaches for estimating both quantities are of interest. This study proposes and evaluates a transmission mode multispectral imaging (MSI) framework for estimating Microcystis spp. cell concentration and ELISA-equivalent MC concentration from culture derived dilution samples. A custom built MSI system acquiring twelve spectral bands from near-ultraviolet to near-infrared wavelengths measured transmitted light spectral responses. Following principal component analysis based dimensionality reduction, spectral variation was quantified using an aggregated Wasserstein distance descriptor for regression based prediction. Cell concentration estimation yielded $R^2=0.9819$ for calibration and $R^2=0.9754$ on held-out intermediate dilution levels, while ELISA-equivalent MC estimation yielded $R^2=0.9788$ for calibration and $R^2=0.9786$ on held-out intermediate dilution levels. These results demonstrate the feasibility of transmission-mode MSI as a dual output optical calibration framework for estimation of Microcystis spp. cell concentration and ELISA-equivalent MC concentration in water.

0.27

Many Pixels, One Composition: Self-Supervised Spectra for Specimen-Level Prediction

cs.CV cs.LG ·2026-11-04 ·Eleftheria Tetoula-Tsonga, George Arvanitakis, Theodoros Giannakas
similarity 0.41
Abstract

Can hyperspectral (HS) imaging be used to predict the elemental composition of physical specimens found on the Earth's surface? We approach this problem as a supervised regression task, using an open dataset of specimens, each comprising a HS cube and elemental characterization. In particular, we train an encoder in a self-supervised fashion that operates on pixel-level; then freeze the encoder and train a lightweight attention-based regression head in a supervised manner, by pairing many representations of a given specimen with its corresponding elemental label. In test specimens, our approach significantly outperforms traditional spectral matching and unmixing baselines. It also outperforms supervised learning models based on the mean spectrum (of similar model capacity), while full model fine-tuning achieves the strongest performance, at substantially higher model capacity.

0.10

Structured-Token Attention for Fine-Grained mmWave Liquid Identification

cs.AI ·2026-10-20 ·Junseo Min, Joongheon Kim
unusual similarity 0.41
Abstract · ICEIC 2027 paper preprint

Fine-grained liquid identification requires a classifier to distinguish similar substances from compact millimeter-wave measurements. We investigate structured-token attention, which represents a radar feature tensor through complementary antenna, feature, branch, and global views. The proposed StructAttn model embeds these views into eleven tokens and combines them with a three-layer transformer. Experiments on the public FG-LiquID data cover 30 liquids and 3,000 samples. Over five seeds on the released split, StructAttn achieves 96.70\% mean best-epoch accuracy, matching the original-recipe MMNet baseline and exceeding a scalar-token attention model by 1.50 percentage points. A five-seed probability ensemble reaches 97\%, corresponding to 18 errors among 600 test samples. Final-epoch and five-fold results complement the checkpoint-selected comparison, with StructAttn obtaining 95.30\% out-of-fold accuracy. Token and feature analyses show that structured views are useful for prediction, while residual confusions concentrate in water, soft-drink, and edible-oil classes. These results support structured tokenization as a practical design choice for attention-based liquid recognition.

0.26

From MS/MS evidence to adaptive spectroscopic characterization: Reinforcement learning guided by candidate molecular structures

cs.LG ·2026-10-29 ·Bowen Gao, Lei Zhu, Yiying Wang, Wenjie Yu
similarity 0.38
Abstract · 17 pages, 5 figures, 2 tables. Supporting information: 10 pages, 3 figures and 7 tables, provided as an ancillary PDF

Small-molecule identification from tandem mass spectrometry (MS/MS) may require complementary measurements. Herein, we propose a structure-informed deep Q-network (SI-DQN) that uses existing MS/MS evidence to decide whether further characterization is needed, which measurement to request, and when to stop. The policy combines spectral representations and candidate rankings with score-weighted descriptors of the candidates' chemical features and structural differences. The policy was evaluated on 79,462 held-out samples with simulated MS/MS, infrared (IR), and nuclear magnetic resonance (NMR) spectra from the Multimodal Spectroscopic Dataset. Evaluation used fixed hard candidate sets containing the correct structure and equal normalized acquisition costs. Averaged across three training runs, SI-DQN increased Top-1 accuracy from 80.10% to 93.78% for positive-ion MS/MS starts and from 70.44% to 93.31% for negative-ion starts. The corresponding mean additional measurement counts were only 0.227 and 0.340 per sample, respectively. Complete acquisition achieved 97.72% accuracy with four additions, whereas SI-DQN reduced the additional measurement count by 94.3% and 91.5%. Relative to a rule-based policy, SI-DQN reduced the composite loss combining terminal ranking error and acquisition cost by 19.3% and 25.5%. Adding structural information to DQN further improved accuracy while reducing requests across all three training runs. At comparable ranking uncertainty, SI-DQN increased request rates relative to DQN more strongly in groups with high structural disagreement, where larger reductions in composite loss were also observed. Together, these results support using the ambiguity among candidate structures after MS/MS analysis to guide further characterization, providing a quantitative basis for balancing identification performance against subsequent measurement effort.

0.17

Continuous wavelet-based feature extraction for laser-induced breakdown spectroscopy classification of human plasma samples

cs.AI ·2026-11-06 ·Md Mahmudur Rahman, Atqiya Munawara Mahi, Nazim Ahmed Belabbaci, Mohammad Arif Ul Alam
unusual similarity 0.38
Abstract

Extracting discriminative features from laser-induced breakdown spectroscopy (LIBS) spectra is important for the classification of complex biological samples. This study evaluates continuous wavelet transform (CWT)-based spectral peak extraction for distinguishing human plasma samples labeled as SARS-CoV-2-positive or negative. Plasma specimens from 181 individuals, comprising 53 positive samples and 128 negative controls, were deposited as 5 μL droplets on silicon substrates and dried before analysis. Spectra were acquired using a nanosecond Nd:YAG laser operating at 1064 nm, with 100 single-shot measurements collected per specimen and averaged after intensity-based outlier rejection. CWT-based peak detection was coupled with a support vector machine (SVM) classifier. The reported leave-one-out evaluation yielded an accuracy of 93.00%, sensitivity of 94.67%, and specificity of 91.61%; these estimates remain provisional pending reconciliation with specimen-level predictions. Features identified by the CWT pipeline included emission lines assigned to Ca II, K I, and N I. The workflow provides a basis for examining spectral features associated with the studied plasma groups. Independent validation and assessment of specimen, substrate, and acquisition-related variability are required to establish generalizability and diagnostic relevance.

0.27