CS Paper Radar

Learning Slope-Adaptive Whole-Body Locomotion for Humanoid Robots in Roofing Construction

Songyang Liu, Shuai Li

cs.RO ·submitted 2026-09-17 15:22 UTC · v1
hot direction

Abstract

Roofing requires workers to coordinate locomotion, balance, and work-related body motions on pitched surfaces, creating a challenging application for humanoid robots. Directly retargeted human demonstrations, however, may preserve motion appearance while placing the robot's feet or hands incorrectly relative to the roof. This study presents a task-semantic scene-grounded framework for learning roofer-style whole-body motions on a Unitree G1. Human demonstrations are captured using a tracking system and retargeted to the robot, while a metric roof model supplies the spatial reference unavailable from the tracking system. A trajectory-level optimization grounds inferred support contacts and annotated work relations to the roof, and execution-aware reinforcement learning encourages the resulting policy to preserve these relations under dynamic tracking errors. The framework is evaluated through a multi-motion tracking study, a roof-pitch coverage matrix, a five-way nailgun ablation, cross-task experiments on hammering and lateral pushing, and comparisons with pure reinforcement learning and zero-shot teleoperation. Our method enables the robot to satisfy support, work-clearance, and nonpenetration criteria across all evaluated seeds. Across nailgun, hammering, and pushing, it achieves work-clearance errors between 0.256 and 0.531 cm and 3/3 successful evaluations per task. Physical experiments reproduce uphill walking, nailgun, hammering, and bending motions with mean base-frame motion errors below 80 mm. These findings establish scene-grounded human motion learning as a promising basis for construction-oriented humanoid motion primitives.

Closest papers

Nearest neighbours by meaning across the whole index.

ROOF: Learning Humanoid Fall Recovery under Overhead Constraints

cs.RO ·2026-10-30 ·Yidan Lu, Jiayuan Yu, Zongrui Cai, Jingwen Sun, Jinrui Han +3 more
code/data similarity 0.72
Abstract · 8 pages, 4 figures

A fallen humanoid beneath an overhead obstacle faces a coupled recovery problem. It must create clearance while organizing support for a stable rise, since attempting to stand before making room can further increase obstruction. We introduce a reinforcement learning method with contact-supported geometric escape guidance, which rewards incremental reduction of robot-obstacle overlap without prescribing an escape path. To achieve this, a learned motion prior, together with posture-dependent support and joint-stall costs, is proposed to shape a single policy that learns when to clear the obstacle, how to establish support, and when to complete the rise, all using proprioception alone. In simulation, it recovers in 88.5% of trials beneath plates that can only be lifted, compared with 18.9% without geometric guidance, and in 98.6% of trials beneath free plates with randomized size, mass and placement. On a Unitree G1, the deployed policy recovered in 95 of 150 attempts across seven real-world obstacle scenes, including furniture and multi-object arrangements absent from training. Project page: https://lu-yidan.github.io/ROOF/

0.25

Beyond Human-Derived Motion: Exploring Robot-Specific Execution for Construction Humanoids

cs.RO ·2026-10-16 ·MinJun Chang, Taehyung Kim, Yong K. Cho, Francis Baek
similarity 0.70
Abstract

Construction productivity has remained a per- sistent challenge, motivating growing interest in humanoid robots that can operate in workspaces and with tools designed for human workers. Realizing this potential requires effective motion control, for which human-derived motion transfer has emerged as a promising approach by capturing and retargeting human demonstrations to humanoid robots. While promising, however, human-derived motion transfer may not fully define how a humanoid should ultimately execute the transferred motion. Once task-relevant motion information has been con- veyed, the humanoid may also exploit its own embodiment through motions that depart from the human demonstration. This study examines whether such Robot-Specific Motion offers an advantage in motion execution efficiency over Human- Derived Motion. On an adult-sized Unitree H1-2, Human- Derived Motion was generated through vision-based capture and retargeting, whereas Robot-Specific Motion used inverse kinematics and minimum-jerk transfers to reach the same targets while departing from the demonstrated posture, as verified using Rapid Upper Limb Assessment (RULA). Across a pick-and-stack sequence representing construction material handling, with four matched motion targets and three trials per condition, Robot-Specific Motion achieved 12.87 s versus 25.03 s in execution time, 0.92 m versus 4.33 m in trajectory length, and 58.7 J versus 247.3 J in two-arm mechanical work. These findings suggest that allowing humanoids to depart from demonstrated human motion may offer additional opportunities for more efficient motion execution, while broader construction tasks are needed to determine whether such differences trans- late into productivity gains.

0.09

Demonstration-Guided Humanoid Stand-Up on an Emulated Deformable Surface

cs.RO ·2026-08-21 ·Aniruddh Kushwah, Vyankatesh Ashtekar, Ashish Dutta
similarity 0.68
Abstract

This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.

0.24

Elastra: A Simulation Framework for Elastic Bodies

cs.RO ·2026-11-11 ·Youran Sun, Chugang Yi, Xingyu Ren, Haizhao Yang
code/data similarity 0.68
Abstract

When robots interact with elastic surfaces such as mattresses and trampolines, changes in loading cause the surfaces to deform and rebound, altering subsequent contact locations and forces. We present Elastra, a simulation framework for modeling this interaction and supporting the training and evaluation of robot control policies. Elastra represents each surface using elements that move only vertically, with elastic connections and damping to model deformation and recovery. Contact forces drive surface motion, and the updated surface geometry is used to compute subsequent contact forces. We systematically validate our simulations against an independent implementation and a real mattress load curve. We further use Elastra to train the Unitree G1 humanoid to stand up on mattresses and trampolines. Using the pretrained HoST policy and ProtoMotions motion tracker as original controllers, we train residual policies through reinforcement learning to add corrections to their joint targets. Adding these residual policies increases the success rate with HoST from 44.1\% to 72.5\%, and from 55\% to 89\% on the trampoline. With ProtoMotions, the success rate increases from 19.0\% to 45.0\% for initial poses not encountered during training. The code and video are available on https://github.com/yichg/elastra.

0.28

PGMT: Perceptive General Motion Tracking for Humanoid Robots

cs.RO ·2026-09-08 ·Hongyi Li, Li Peizhuo, Yucheng Tao, Ze Wang, Fangzhou Xu +7 more
hot directionhighly cited similarity 0.67
Abstract

Humanoid motion trackers can reproduce diverse whole-body motions, but their performance degrades on complex terrain where terrain-agnostic references become physically infeasible. We present PGMT, a Perceptive General Motion Tracking pipeline for humanoid robots that learns terrain adaptation from independently selected motion references and terrains. PGMT first learns a general tracking and recovery prior, then incorporates terrain perception through motion-conditioned terrain glimpses that selectively encode regions relevant to the current motion. Terrain-aware tracking relaxation allows necessary deviations from the reference while preserving its motion intent. Zero-shot deployment on a Unitree G1 demonstrates robust terrain-adaptive locomotion and whole-body motion execution over real-world terrain with obstacles up to 37 cm high, while supporting teleoperation, dynamic motion tracking, and fall recovery. PGMT extends general humanoid motion tracking beyond flat ground, providing a unified policy for terrain-adaptive locomotion, diverse whole-body behaviors, and teleoperation in complex environments. Project homepage: https://luyili.github.io/pgmt/

0.55

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.67
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.66
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

EgoAlign: Bridging the Human-Humanoid Gap for Long-Range Loco-Manipulation

cs.RO ·2026-09-29 ·Yiming Jiang, Jin Chen, Chongyang Xu, Yilun Chen, Aimin Hao +1 more
similarity 0.66
Abstract

Egocentric human demonstrations offer an accessible source of task experience, but differences in body scale and controller response, together with missing robot states, limit their value as humanoid training supervision. We present EgoAlign, a data-construction framework that converts these demonstrations into action and state supervision compatible with a general-purpose, continuous whole-body controller, without collecting physical-robot demonstrations. Using the target-robot model and simulator, EgoAlign guides demonstration collection through execution feedback. It preserves locomotion references for visually guided periodic stepping while adapting upper-body interaction geometry through scale alignment and controller-in-the-loop refinement. A final causal replay reconstructs the corresponding robot states and motion-token labels for training with the human observations. We assess the resulting supervision by fine-tuning a vision--language--action model solely on adapted human demonstrations and deploying it zero-shot on a physical humanoid. The resulting policies perform long-range object relocation, navigation to unseen goal positions, and independently evaluated foot interaction. Refinement improves simulated hand alignment and physical pickup success over kinematic alignment alone, while human collection reduces on-site acquisition time relative to teleoperation. https://lambdahumanoid.github.io/EgoAlign/

0.25