CS Paper Radar

Demonstration-Guided Humanoid Stand-Up on an Emulated Deformable Surface

Aniruddh Kushwah, Vyankatesh Ashtekar, Ashish Dutta

cs.RO ·submitted 2026-08-21 08:16 UTC · v1

Abstract

This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.

Closest papers

Nearest neighbours by meaning across the whole index.

Elastra: A Simulation Framework for Elastic Bodies

cs.RO ·2026-11-11 ·Youran Sun, Chugang Yi, Xingyu Ren, Haizhao Yang
code/data similarity 0.76
Abstract

When robots interact with elastic surfaces such as mattresses and trampolines, changes in loading cause the surfaces to deform and rebound, altering subsequent contact locations and forces. We present Elastra, a simulation framework for modeling this interaction and supporting the training and evaluation of robot control policies. Elastra represents each surface using elements that move only vertically, with elastic connections and damping to model deformation and recovery. Contact forces drive surface motion, and the updated surface geometry is used to compute subsequent contact forces. We systematically validate our simulations against an independent implementation and a real mattress load curve. We further use Elastra to train the Unitree G1 humanoid to stand up on mattresses and trampolines. Using the pretrained HoST policy and ProtoMotions motion tracker as original controllers, we train residual policies through reinforcement learning to add corrections to their joint targets. Adding these residual policies increases the success rate with HoST from 44.1\% to 72.5\%, and from 55\% to 89\% on the trampoline. With ProtoMotions, the success rate increases from 19.0\% to 45.0\% for initial poses not encountered during training. The code and video are available on https://github.com/yichg/elastra.

0.28

Reactive Humanoid Multi-Contact Using Learned Stability Models

cs.RO ·2026-09-30 ·Stephen McCrory, Beomyeong Park, Nicholas Kitchel, Nehar Poddar, Robert Griffin
similarity 0.75
Abstract

We present a planning and control approach to reactively use hand contacts to stabilize a humanoid in low stability scenarios, where only using feet contacts may result in a fall. Candidate contacts are sampled within the robot's reachable workspace, and a preview is computed by rolling out the centroidal dynamics through pre-impact, impact and post-impact phases. Sampled points are scored based on the Center of Pressure (CoP) control authority at the post-impact phase. Central to our approach is a learned model of the robot's CoP region during post-impact, which enables rapid evaluation of candidate contact points compared to traditional optimization-based methods. The presented planner has two stages: the first selects an optimal bracing region and the second computes an optimal bracing point within the region. Our simulation results demonstrate an average increase in impulse resilience of 89% over recovery without hand contacts and 17% over a naive planning strategy (closest reachable region). We validate our framework on hardware, performing push tests while standing and walking. The standing trials show an average 43% reduction in stabilization time compared to naive hand placement and the walking trials demonstrate a 18% reduction compared to baseline recovery (without hand contacts).

0.16

ROOF: Learning Humanoid Fall Recovery under Overhead Constraints

cs.RO ·2026-10-30 ·Yidan Lu, Jiayuan Yu, Zongrui Cai, Jingwen Sun, Jinrui Han +3 more
code/data similarity 0.74
Abstract · 8 pages, 4 figures

A fallen humanoid beneath an overhead obstacle faces a coupled recovery problem. It must create clearance while organizing support for a stable rise, since attempting to stand before making room can further increase obstruction. We introduce a reinforcement learning method with contact-supported geometric escape guidance, which rewards incremental reduction of robot-obstacle overlap without prescribing an escape path. To achieve this, a learned motion prior, together with posture-dependent support and joint-stall costs, is proposed to shape a single policy that learns when to clear the obstacle, how to establish support, and when to complete the rise, all using proprioception alone. In simulation, it recovers in 88.5% of trials beneath plates that can only be lifted, compared with 18.9% without geometric guidance, and in 98.6% of trials beneath free plates with randomized size, mass and placement. On a Unitree G1, the deployed policy recovered in 95 of 150 attempts across seven real-world obstacle scenes, including furniture and multi-object arrangements absent from training. Project page: https://lu-yidan.github.io/ROOF/

0.25

Natural Sit-to-Stand Motion Synthesis For Humanoids via Guided Assistance Curricula and Staged Rewards

cs.RO ·2026-08-21 ·Meet Pal Singh, Vyankatesh Ashtekar, Ashish Dutta
hot direction similarity 0.73
Abstract

A humanoid has infinitely many ways to stand up from sitting while maintaining balance, making sit-to-stand (STS) a challenging control problem. We synthesise natural humanoid STS motion from scratch using reinforcement learning, without demonstrations or reference trajectories. A single Proximal Policy Optimisation policy learns smooth, human-like rising driven by three complementary components. (i) A coupled force/chair-height curriculum is used. A vertical pelvis-assist force aids early trajectory exploration and decays over training. Taller chairs are unlocked with decaying assisting force. This ensures that the policy masters a viable STS trajectory at each chair height before being exposed to harder ones, avoiding the premature distribution shift that otherwise collapses generalisation. (ii) Motion robustness is achieved by randomly sampling from a large number of inverse kinematics-generated initial and target poses spanning over eight chair heights. (iii) A set of rewards is defined inspired from biomechanics and optimal control studies. They shape the robot's angular momentum for seat-off, and enable support-region transition via centre of pressure attraction function to ensure smooth low-effort actuation. On a deterministic force-free evaluator, the policy attains more than 97% balanced-standing success across eight chair heights. The policy generalises smooth motion across chair heights and enables the robot to rise from substantially deep-seated postures as compared to the state of the art.

0.27

TactileStep: Sole Tactile Learning for Regulating Foot-Terrain Interaction in Humanoid Locomotion

cs.RO ·2026-09-24 ·Zizhuo Wang, Ming-ju Lee, Shaoting Zhu, Haozhe Lou, Hang Zhao +1 more
similarity 0.72
Abstract

Humanoid parkour policies can traverse various terrains, but task completion may mask challenges of harsh landings, edge contacts, and unstable stance contacts. Humans naturally regulate foot-terrain interaction through tactile feedback, modulating contact compliance according to terrain stiffness. This highlights a key domain gap between humans and humanoid robots: the absence of rich tactile sensing in most humanoid systems. We address this problem with TactileStep, a deployable tactile learning framework that brings sole pressure sensing into humanoid locomotion control for softer touchdowns and more stable support. TactileStep aligns tactile simulation with the real pressure insole, allowing the policy to learn from the same contact features available on hardware. During training, we use tactile and motion cues to recognize different foot-contact phases and apply phase-aware rewards that encourage safer landing and more stable stance. Evaluated in simulation and on a Unitree G1 humanoid across diverse terrains, TactileStep reduces peak touchdown force by up to 48.8% and peak A-weighted impact noise by up to 30.1 dB over a strong perceptive baseline, while increasing stance contact area by up to 23.8%.

0.25

Terrain-Indexed Motion Priors and Geometric Support for Extreme Humanoid Parkour

cs.RO ·2026-11-05 ·Chenghao Sun, Youhao Lyu, Zizheng Li, Shuting Zhang, Ziyang Dong +1 more
similarity 0.72
Abstract

We present a progressive imitation framework that learns terrain-appropriate humanoid parkour skills and subsequently adapts their hand--knee support. Human demonstrations provide traversal behaviors, but their contact patterns need not suit a robot's proportions or the available support surfaces. Our framework changes the role of demonstrations across three stages: privileged imitation produces physically executable robot references; terrain-indexed adversarial motion priors guide skill acquisition; and geometric support guidance with a reduced motion-prior weight enables contact adaptation. Candidate-based precontact attraction and actual-contact evaluation guide support without prescribing a contact sequence. The deployed policy selects behaviors from onboard depth, proprioception, and velocity commands without an external skill label. On the Noetix E1, the policy achieves 96.34\% hybrid success in simulation and transfers without real-world policy fine-tuning, completing 29 of 30 individual obstacle trials and four of five hybrid courses. Support-adaptation ablations show higher traversal success for the complete adaptation stage on the tested terrains, while qualitative observations show changes in contact placement. These results support acquiring skills from demonstrations before relaxing their influence to accommodate robot-specific support configurations.

0.11

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.71
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

Brace Yourself: Task-Conditioned Environmental Bracing for Forceful Humanoid Manipulation

cs.RO ·2026-09-21 ·Zongyuan Zhang, Christopher Lehnert, Will N. Browne, Jonathan M. Roberts
similarity 0.70
Abstract · Submitted to IEEE Robotics and Automation Letters (RA-L). 8 pages, 6 figures. Video demonstration: https://youtu.be/zPrGLxWJzI4. This work h…

Forceful manipulation is challenging for humanoid robots because interaction forces can disturb whole-body balance. We introduce the Supporting Hand Strategy (SHS), which enables a humanoid to brace against the environment with one hand while performing forceful manipulation with the other. SHS optimises a task-conditioned support configuration that guides two synchronous reinforcement-learning policies, without human motion data or online whole-body trajectory planning. On a Unitree G1, SHS achieved usable contact forces up to 60 N, compared with a maximum sustained force of 13.5 N without environmental bracing, while substantially improving force tracking over a task-independent support configuration. The same policies generalised to different task regions without retraining. SHS therefore provides a simple mechanism for substantially extending humanoid forceful-manipulation capability.

0.37