CS Paper Radar

Natural Sit-to-Stand Motion Synthesis For Humanoids via Guided Assistance Curricula and Staged Rewards

Meet Pal Singh, Vyankatesh Ashtekar, Ashish Dutta

cs.RO ·submitted 2026-08-21 07:44 UTC · v1
hot direction

Abstract

A humanoid has infinitely many ways to stand up from sitting while maintaining balance, making sit-to-stand (STS) a challenging control problem. We synthesise natural humanoid STS motion from scratch using reinforcement learning, without demonstrations or reference trajectories. A single Proximal Policy Optimisation policy learns smooth, human-like rising driven by three complementary components. (i) A coupled force/chair-height curriculum is used. A vertical pelvis-assist force aids early trajectory exploration and decays over training. Taller chairs are unlocked with decaying assisting force. This ensures that the policy masters a viable STS trajectory at each chair height before being exposed to harder ones, avoiding the premature distribution shift that otherwise collapses generalisation. (ii) Motion robustness is achieved by randomly sampling from a large number of inverse kinematics-generated initial and target poses spanning over eight chair heights. (iii) A set of rewards is defined inspired from biomechanics and optimal control studies. They shape the robot's angular momentum for seat-off, and enable support-region transition via centre of pressure attraction function to ensure smooth low-effort actuation. On a deterministic force-free evaluator, the policy attains more than 97% balanced-standing success across eight chair heights. The policy generalises smooth motion across chair heights and enables the robot to rise from substantially deep-seated postures as compared to the state of the art.

Closest papers

Nearest neighbours by meaning across the whole index.

Stay Seated: Learning Omnidirectional Humanoid Locomotion on a Passive Mobile Chair with Casters

cs.RO ·2026-08-28 ·Kango Yanagida, Kazuki Miyazawa, Takato Horii
similarity 0.81
Abstract

Humanoid robots with quasi-direct-drive actuators continuously generate joint torque while standing, whereas seated humans delegate weight support to chairs during desk work. As a first step toward seated loco-manipulation, we study omnidirectional seated locomotion on a passive mobile chair, requiring unfixed pelvis-seat contact and intermittent foot-floor propulsion of the robot-chair system. We extend a standard standing velocity-tracking environment with a passive-chair model, seated-state rewards, critic-only chair observations, and task-tailored contact settings. The policy is learned without motion-imitation rewards; its actor uses only proprioception and velocity commands, without contact sensing or chair states. In random-command evaluation, the policies tracked omnidirectional commands through nearly all 20-s rollouts, and the best seated policies could outperform the Standing policy in velocity tracking. Across four training seeds, a $2^3$ full-factorial comparison of symmetry regularization (SY), foot-slip regularization (FS), and command curriculum (CC) showed that FS reduced CoT but increased tracking error and that some FS-only policies converged to stationary local optima. Combining FS with either SY or CC avoided this failure without retuning FS, while SY improved bilateral leg symmetry during longitudinal motion. Direction-resolved analysis showed CoT ordered backward $<$ lateral $\ll$ forward, with planted-leg extension in backward and lateral motion and knee flexion following heel contact in forward motion. The learned policy achieved zero-shot sim-to-real transfer to a Unitree G1 and generated omnidirectional seated locomotion.

0.03

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.75
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

Demonstration-Guided Humanoid Stand-Up on an Emulated Deformable Surface

cs.RO ·2026-08-21 ·Aniruddh Kushwah, Vyankatesh Ashtekar, Ashish Dutta
similarity 0.73
Abstract

This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.

0.24

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.72
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

Model-Informed Safe Reinforcement Learning for Bipedal Locomotion via Step-to-Step Prediction

cs.RO ·2026-09-28 ·Victor Paredes, Ayonga Hereid
published similarity 0.71
Abstract · Accepted to IROS 2026

Humanoid robots promise versatile mobility in cluttered, human-centric environments, but real deployment demands principled safety. Classical model-based gait generators yield interpretable motions but often lack the robustness and adaptability of modern reinforcement learning (RL) based approaches. We propose a model-informed reinforcement learning framework anchored to the analytical Angular Momentum Linear Inverted Pendulum (ALIP) template. We provide a step-to-step safety certificate for ALIP stepping via a discrete exponential control barrier function (DECBF) and use it as (i) a training-time shaping signal and (ii) a runtime action filter that minimally adjusts swing-foot placement to satisfy template-level constraints. Full-order safety is evaluated empirically on the Digit humanoid in MuJoCo with a whole-body controller stack. Compared to an unconstrained baseline, our approach reduces safety-violation events in the reported external-disturbance trial, while larger lateral-velocity transients reveal a safety-tracking tradeoff.

0.33

Terrain-Indexed Motion Priors and Geometric Support for Extreme Humanoid Parkour

cs.RO ·2026-11-05 ·Chenghao Sun, Youhao Lyu, Zizheng Li, Shuting Zhang, Ziyang Dong +1 more
similarity 0.71
Abstract

We present a progressive imitation framework that learns terrain-appropriate humanoid parkour skills and subsequently adapts their hand--knee support. Human demonstrations provide traversal behaviors, but their contact patterns need not suit a robot's proportions or the available support surfaces. Our framework changes the role of demonstrations across three stages: privileged imitation produces physically executable robot references; terrain-indexed adversarial motion priors guide skill acquisition; and geometric support guidance with a reduced motion-prior weight enables contact adaptation. Candidate-based precontact attraction and actual-contact evaluation guide support without prescribing a contact sequence. The deployed policy selects behaviors from onboard depth, proprioception, and velocity commands without an external skill label. On the Noetix E1, the policy achieves 96.34\% hybrid success in simulation and transfers without real-world policy fine-tuning, completing 29 of 30 individual obstacle trials and four of five hybrid courses. Support-adaptation ablations show higher traversal success for the complete adaptation stage on the tested terrains, while qualitative observations show changes in contact placement. These results support acquiring skills from demonstrations before relaxing their influence to accommodate robot-specific support configurations.

0.11

ROOF: Learning Humanoid Fall Recovery under Overhead Constraints

cs.RO ·2026-10-30 ·Yidan Lu, Jiayuan Yu, Zongrui Cai, Jingwen Sun, Jinrui Han +3 more
code/data similarity 0.71
Abstract · 8 pages, 4 figures

A fallen humanoid beneath an overhead obstacle faces a coupled recovery problem. It must create clearance while organizing support for a stable rise, since attempting to stand before making room can further increase obstruction. We introduce a reinforcement learning method with contact-supported geometric escape guidance, which rewards incremental reduction of robot-obstacle overlap without prescribing an escape path. To achieve this, a learned motion prior, together with posture-dependent support and joint-stall costs, is proposed to shape a single policy that learns when to clear the obstacle, how to establish support, and when to complete the rise, all using proprioception alone. In simulation, it recovers in 88.5% of trials beneath plates that can only be lifted, compared with 18.9% without geometric guidance, and in 98.6% of trials beneath free plates with randomized size, mass and placement. On a Unitree G1, the deployed policy recovered in 95 of 150 attempts across seven real-world obstacle scenes, including furniture and multi-object arrangements absent from training. Project page: https://lu-yidan.github.io/ROOF/

0.25

Reusing Locomotion Training Recipes Across Humanoids via Body-Aligned Virtual Joints

cs.RO ·2026-11-13 ·Sol Choi, Mingon Kim, Seokin Seo, Jongeun Choi, Donghyeon Kim +1 more
similarity 0.71
Abstract · 8 pages, 7 figures, 1 table

Reinforcement learning has enabled robust humanoid locomotion, yet training recipes (rewards, architectures, hyperparameters) remain hard to reuse across robots with different native joint coordinates, since policies output native joint angles while action scales, bounds, gains, and penalties are defined in those robot-specific coordinates. Existing transmission models convert native targets into actuator commands but do not standardize the coordinate interface exposed to the policy. We introduce a body-aligned virtual joint space upstream of this mapping: policy actions and observations follow a common anatomical convention, and a deterministic kinematic layer maps virtual targets to native ones, leaving the existing transmission and low-level control stack unchanged. Under a single unmodified recipe on three humanoids with different leg-axis layouts, it is the only interface that tracks accurately, keeps the feet aligned with the travel direction, and trains stably on all three, and on Unitree G1 hardware it reduces heading drift by nearly a factor of six.

0.10