CS Paper Radar

Reusing Locomotion Training Recipes Across Humanoids via Body-Aligned Virtual Joints

Sol Choi, Mingon Kim, Seokin Seo, Jongeun Choi, Donghyeon Kim, Yisoo Lee

cs.RO ·submitted 2026-11-13 10:29 UTC · v1

Abstract

Reinforcement learning has enabled robust humanoid locomotion, yet training recipes (rewards, architectures, hyperparameters) remain hard to reuse across robots with different native joint coordinates, since policies output native joint angles while action scales, bounds, gains, and penalties are defined in those robot-specific coordinates. Existing transmission models convert native targets into actuator commands but do not standardize the coordinate interface exposed to the policy. We introduce a body-aligned virtual joint space upstream of this mapping: policy actions and observations follow a common anatomical convention, and a deterministic kinematic layer maps virtual targets to native ones, leaving the existing transmission and low-level control stack unchanged. Under a single unmodified recipe on three humanoids with different leg-axis layouts, it is the only interface that tracks accurately, keeps the feet aligned with the travel direction, and trains stably on all three, and on Unitree G1 hardware it reduces heading drift by nearly a factor of six.

Comment
8 pages, 7 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.74
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

FORGE: Feasible Online Reduced-Order Reference Generation and Whole-Body Execution for Agile Humanoid Locomotion

cs.RO cs.LG ·2026-10-27 ·Adrian B. Ghansah, Yujin An, Jeeseop Kim, Soon-Jo Chung
published similarity 0.74
Abstract · 8 pages, 6 figures. Accepted to the 2026 IEEE-RAS 25th International Conference on Humanoid Robots (Humanoids)

This paper presents a two-stage learning framework for versatile and agile humanoid locomotion that couples online reduced-order model (ROM) reference generation with whole-body tracking control. In the first stage, we train a command-conditioned whole-body reference generator using single rigid body dynamics combined with full humanoid kinematics. In the second stage, the frozen ROM policy is rolled out online to generate references for training a whole-body tracking policy on the full-order dynamics model. Learning a kino-dynamically consistent reference generator in the simplified ROM space enables us to generate references over a broad command space and over multiple locomotion strategies using a single unified framework. We demonstrate the approach on a Unitree G1 humanoid robot, achieving longitudinal velocities from -2.0 m/s to 2.8 m/s, lateral velocities up to +-1.0 m/s, angular velocities up to +-3.0 rad/s, one-legged hopping, and continuous transitions across the commands, all using one unified reference policy and one whole-body tracking policy.

0.23

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.73
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

Learning Holistic Whole-Body Loco-Manipulation with a Bipedal Mobile Manipulator

cs.RO ·2026-09-16 ·Zhongyu Chen, Yuxuan Nai, Qian Chen, Yidong Zhu, Chen Jing +6 more
similarity 0.73
Abstract

Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.

0.21

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.73
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

X-WBC: A Cross-Embodiment Foundation Model for Humanoid Whole-Body Control

cs.RO ·2026-09-14 ·Juntong Zhang, Chun Gu, Li Zhang
published similarity 0.72
Abstract · Accepted to CoRL 2026

Scaling humanoid whole-body control toward general-purpose deployment requires large human motion corpora and training experience shared across robot bodies. Existing methods usually train one policy per robot, leaving motion experience isolated across embodiments. We introduce X-WBC, a cross-embodiment foundation framework that separates relatively shared human motion semantics from embodiment-specific physical execution. Human-centered command tokens align full human motion, robot reference motion, and sparse VR observations. A causal Transformer learns reusable temporal structure from mixed multi-robot rollouts, while lightweight robot-specific modules map the shared representation to each robot's proprioception and action space. Across nine simulated embodiments, external motions, and four real robots, experiments show that joint training improves tracking, the aligned representation supports consistent control across command sources, and the learned policy remains competitive beyond the training corpus. These results support heterogeneous humanoids as joint data sources and establish cross-embodiment joint training as a practical route toward whole-body control foundation models.

0.51

OIL: An Object Interaction Layer for Humanoid Whole-Body Control

cs.RO ·2026-10-01 ·Pranay Dugar, Mohitvishnu S. Gadde, Rajesh Mangannavar, Aayam Kumar Shrestha, Alan Fern
published similarity 0.72
Abstract

Recent progress in learned whole-body controllers for humanoid robots has enabled robust free-space motion by tracking kinematic targets such as joint or end-effector trajectories. This interface provides a useful abstraction for upstream systems, including motion capture, teleoperation, or generative models, which can specify desired motion without reasoning about forces or balance. However, this abstraction has largely been limited to robot motion, requiring task-specific controllers or retraining for object interaction. We introduce OIL, an Object Interaction Layer that extends the kinematic command interface of whole-body control to include desired object motion and contact. OIL augments a standard controller with object-centric commands and translates them into coordinated whole-body behavior while preserving locomotion and balance. This design enables a single learned policy to execute non-prehensile interactions, including pushing, pulling, two-arm pick-and-place, and locomotion-coupled transport, directly from object-level kinematic targets without task-specific retraining. In simulation, we demonstrate that object-level commands improve performance over robot-centric controllers while matching task-specific policies across variations in object properties such as mass and size. We further demonstrate zero-shot generalization to novel behavior combinations and sim-to-real transfer on the Digit humanoid robot.

0.26

STRIDE: Learning Humanoid Locomotion in Minutes with Acceleration-Based Rewards

cs.RO cs.LG ·2026-11-06 ·Nico Bohlinger, Jan Peters
similarity 0.72
Abstract

Learning locomotion directly on a humanoid robot is a promising direction to avoid the sim-to-real gap. However, locomotion rewards in Reinforcement Learning (RL) typically track the base velocity, which cannot be measured onboard without an external motion capture system or well-calibrated state estimator. This is why we introduce \method{}, which learns humanoid locomotion from minutes of samples with a reward that only requires the onboard Inertial Measurement Unit (IMU). Instead of tracking the base velocity, STRIDE rewards the robot for following a commanded acceleration profile. To learn efficiently from this reward, we use the off-policy RL algorithm XQC and combine a high gain setting for the joint position controllers with left-right symmetry augmentation. In simulation, STRIDE learns to walk on the Unitree G1 and Booster T1 humanoids within 14 minutes of samples. Compared to learning without these two components, it reduces the falls during training by 81%, while without them the robot learns only in over an hour.

0.11