CS Paper Radar

Adaptive Antenna Element Activation for Multiuser Uniform Spherical Arrays

Ao Li, Cunhua Pan, Wang Liu, Hong Ren, Jiangzhou Wang

eess.SP ·submitted 2026-09-18 11:30 UTC · v1

Abstract

Uniform spherical arrays provide full-space coverage. However, owing to directional element patterns, full-array transmission activates many elements that contribute little to a given user, resulting in increased system overhead and inefficient power allocation. To address this issue, this letter proposes an adaptive element activation strategy for multiuser uniform spherical arrays that reduces the number of physically active elements while satisfying individual user rate requirements. The proposed strategy constructs a user-specific candidate sequence according to the angle between each element boresight and the user direction. At each iteration, it selects, among the unsatisfied users, the user-element connection that provides the largest improvement in the aggregate rate deficit. Simulation results show that fewer than half of the elements are sufficient for a single user to achieve 80% of its full-array rate, while fewer than 70% are sufficient to achieve the full-array rates of all users in multiuser scenarios. Moreover, the proposed strategy consistently requires a lower active-element ratio than the baseline methods across all tested configurations.

Closest papers

Nearest neighbours by meaning across the whole index.

User Association and Transmit Beamforming for Rotatable Antenna-Enabled LAE Networks

eess.SP ·2026-09-28 ·Bowen Yao, Chao Zhang, Ying-Chang Liang
similarity 0.65
Abstract

This paper investigates rotatable antenna (RA)-enabled low-altitude economy (LAE) networks, where multiple base stations (BSs) are deployed to serve both terrestrial and aerial users. Unlike conventional fixed orientation antennas, RAs can adjust their boresights to serve users at diverse azimuth and elevation angles, thereby providing three-dimensional (3D) coverage. To improve the performance of LAE networks, we formulate a network sum-rate maximization problem that jointly optimizes user association, transmit beamforming, and RA orientations. However, in such LAE networks, aerial users are often visible to multiple BSs through line-of-sight (LoS) links, making user association and interference management particularly challenging. Moreover, user association and RA orientations are closely coupled: user association affects the RA pointing directions, while the RA orientations in turn reshape the channel conditions for user association. To solve this problem, we propose an alternating optimization (AO) algorithm that integrates weighted minimum mean-square error (WMMSE) for transmit beamforming, projected gradient ascent updates for user association, and Frank-Wolfe updates for RA orientations. Furthermore, we develop a discrete candidate-scanning scheme that replaces continuous orientation optimization with a finite search to reduce computational complexity. We also propose an antenna block-based scheme to reduce the number of orientation variables. Simulation results show that the proposed joint design achieves a higher sum-rate than the fixed antenna orientation and nearest BS association benchmarks. Moreover, the candidate-scanning and block-based schemes achieve approximately 89.9% and 94.3% of the performance with high transmit power, respectively, while reducing the complexity of orientation updates.

0.17

Sparse Rotatable Arrays (SRAs) for Cell-Free MIMO: Network-Wide Design of Antenna Activation and Panel Orientation

cs.IT ·2026-11-15 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wei Feng, Wen Chen +1 more
benchmark similarity 0.64
Abstract

This paper investigates a sparse rotatable array (SRA)-enabled cell-free multiuser multiple-input multiple-output (MIMO) system. Under a network-wide antenna activation budget, distributed access points (APs) select active antenna elements from their installed arrays and adjust panel orientations, enabling joint control of sparse array apertures and antenna directivity. To avoid frequent hardware reconfiguration in response to instantaneous channel variations, we formulate a two-timescale stochastic optimization problem to maximize the expected minimum-user rate. Long-term antenna activation and panel orientations are optimized based on user spatial distributions and statistical channel state information (CSI), while short-term precoders adapt to instantaneous CSI. Under line-of-sight (LoS) propagation, we derive the optimal single-user antenna allocation, characterize the two-user max-min signal-to-interference-plus-noise ratio (SINR) and establish conditions for discrete activation and panel rotation to attain the continuous-position benchmark, and obtain a closed-form multi-AP zero-forcing (ZF) allocation benchmark under a continuous antenna-count relaxation. For the general mixed-integer nonconvex stochastic problem, we develop an alternating algorithm based on sample-average approximation (SAA), integrating uplink-downlink (UL-DL) duality for short-term precoding, weighted minimum mean-square error (WMMSE) surrogates for panel-orientation optimization, and multi-start greedy search for antenna activation. Numerical results demonstrate that the proposed design outperforms the fixed-array benchmark, improves all-user service reliability with fewer active antennas, and adapts effectively to nonuniform user spatial distributions.

0.23

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.63
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

Non-Uniform Array Configuration and Antenna Deactivation for Energy-Efficient Sensing

eess.SP ·2026-11-14 ·Parisa Ramezani, Meesam Jafri, Marina Petrova, Emil Bj{ö}rnson
similarity 0.59
Abstract

This paper proposes a non-uniform array design framework for energy-efficient multi-target sensing by jointly optimizing the antenna configuration and the transmit covariance matrix (TCM). To begin with, a limited number of antennas are selected from a set of antenna locations to maximize the minimum mainlobe-to-peak-sidelobe-level ratio (MMPSR) over a sensing region. Next, the antenna configuration is optimized using a simulated annealing (SA)-based search, while a TCM optimization problem is formulated using Charnes-Cooper transformation and solved as a convex semidefinite program for each fixed configuration. Subsequently, an adaptive antenna deactivation strategy is developed to determine the maximum number of antennas that can be switched off while satisfying an MMPSR requirement. Finally, simulation results demonstrate that the proposed non-uniform array design outperforms fixed uniform and non-uniform array benchmarks and requires fewer active antennas to achieve a required sensing performance, thereby supporting energy-efficient sensing.

0.26

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.59
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

Satellite Swarms for Direct-to-Cell Networks: A Distribution-Performance Trade-off Analysis

eess.SP ·2026-09-01 ·Xavier Artiga, Marius Caus, Ana I. Pérez-Neira, Yerassyl Akhmetkaziyev, Malte Schellmann
published similarity 0.59
Abstract · 19 pages, 15 figures

This work investigates 2D distributed satellite swarm configurations for direct-to-cell (D2C) applications. Unlike previous studies, which primarily considered swarms as deployment alternatives to monolithic arrays, this paper focuses on exploiting the increased spatial resolution enabled by large distributed apertures. Simulation results show that, for the considered scenarios, increasing the level of antenna distribution across satellite platforms enlarges the effective aperture and improves the system sum rate under ideal operating conditions. While gains are moderate for uniformly distributed users, they become particularly pronounced in scenarios including hotspot with high user densities. The results further show that user scheduling strategies do not invalidate the superiority of highly distributed configurations, as these architectures provide a more balanced rate distribution across the coverage area, including hotspot regions. In addition, the paper analyzes several key implementation challenges associated with large distributed swarms, including errors in inter-satellite relative positioning, synchronization impairments, and limited beamforming and user-position update rates. Although within the range of swarm configurations and scenarios considered in this work, performance gains continue to increase with aperture size, these practical constraints may restrict swarm sizes in the medium term. Nevertheless, the observed performance gains strongly motivate further research into scalable synchronization, positioning and data distribution techniques for future large-scale satellite swarms.

0.55

Modeling and Performance Evaluation of Distributed Satellite Antennas: Space Is Much Closer Than One Might Think

cs.IT ·2026-10-07 ·Giacomo Bacci, Riccardo De Gaudenzi, Marco Luise, Luca Sanguinetti
similarity 0.58
Abstract · currently submitted to IEEE Transactions on Aerospace and Electronics Systems (14 figures, 1 table)

Distributed satellites can deliver broadband connectivity directly to commercial handsets. In the formation of arrays (FoA) architecture, cooperating satellites synthesize a large aperture whoseextent depends on their number, arrangement, and spacing, with intersatellite distances ranging from tens of meters to hundreds of kilometers. For representative S-band geostationary and low-Earth-orbit configurations, the Fraunhofer distance may exceed the nadir link range at spacings on the order of a hundred meters. Therefore, accurate assessment of FoA performance across satellite populations and spacings requires spherical-wave modeling for users in the radiative near field, below the formation's Fraunhofer distance. Planar models of satellite positions, array orientations, and user locations must also be assessed against spherical geometries accounting for orbital and Earth curvature. This paper combines these models to quantify how simplifying assumptions affect throughput and outage probability. Numerical results show that multi-antenna precoding based on a local plane-wave approximation within each satellite array closely matches the spherical-wave reference. A global plane-wave approximation can instead cause severe losses, including full outage. In the investigated scenarios, formation curvature has little impact, whereas neglecting Earth curvature overestimates low-Earth-orbit throughput. These findings clarify when geometric and propagation approximations remain reliable and demonstrate that, for large distributed antenna apertures, space is much closer than one might think.

0.21

Large-Scale Partition-Based RIS Beamforming For Uplink RIS-Equipped Multi-User Systems: Asymptotic Analysis

eess.SP eess.SY ·2026-10-08 ·Samira Rahimian, Haris Gacanin
theory similarity 0.58
Abstract

Combining a reconfigurable intelligent surface (RIS) with a receive antenna array is a promising low-complexity architecture for multi-user uplink reception, but its performance analysis for more than two users has remained an open problem: the zero-forcing (ZF) signal-to-interference-plus-noise ratio (SINR) no longer admits an explicit, low-dimensional closed-form expression, and its distribution is analytically intractable for design purposes. This paper addresses this gap for a K-user, K-antenna uplink system in which a large-scale, L-element RIS, partitioned into K user-dedicated sub-surfaces, precedes ZF reception at the base station. Through an asymptotic analysis in which the sub-surface sizes grow without bound, we show that the orthogonal projector underlying the ZF SINR converges to a rank-one matrix aligned with the desired user's channel. We use this convergence to derive a closed-form asymptotic approximation for the average per-user SINR that depends only on deterministic channel parameters. Treating this expression as a tractable design objective, we prove that equal partitioning is approximately sum-rate-optimal at leading order regardless of path-loss asymmetry across users. We also develop a low-complexity greedy pairwise-transfer search that refines the partition beyond this leading-order optimum. Monte Carlo simulations across a range of system and RIS sizes confirm that the closed-form SINR tracks the exact simulated rate closely once the RIS is large relative to the number of users. The greedy search also yields consistent, if modest, sum-rate gains over equal partitioning, validating the theory as both an accurate performance predictor and a practical design tool.

0.34