CS Paper Radar

GenVoid: Uncertainty-Aware Learning of Subsurface Material Defects with an Experimentally Validated Physics-Informed Generative Model

Trishit Mondal, Prajwal Bharadwaj, Nikhil Karanjgaokar, Ameya D. Jagtap

cs.LG ·submitted 2026-09-20 17:20 UTC · v1

Abstract

Internal voids are ubiquitous defects in manufactured structures, yet their characterization remains challenging because their geometry is hidden and can only be inferred indirectly from accessible measurements. Here we introduce \textit{GenVoid}, a physics-informed generative model-based framework for identifying internal voids in complex two- and three-dimensional solids from surface displacement measurements alone. By incorporating the governing mechanics into a generative inference framework, \textit{GenVoid} enables void identification across linear elastic, hyperelastic and plastic material behaviours and accommodates complex two- and three-dimensional structural geometries. Importantly, the framework explicitly accounts for uncertainty and noise in displacement measurements, producing probabilistic reconstructions of internal void geometry rather than a single deterministic estimate. We demonstrate the approach using high-fidelity synthetic datasets and experimentally measured displacement fields obtained from in-situ mechanical experiments, establishing its ability to infer hidden voids from realistic displacement measurements. To quantify the fundamental limits of such inference, we further introduce an observability measure that characterizes the sensitivity of boundary measurements to localized stiffness perturbations within the interior under an ensemble of applied loads. This framework provides a direct connection between defect location, sensor configuration and reconstruction fidelity, enabling systematic assessment of how the number and spatial distribution of boundary measurements govern void-identification accuracy. To this end, these results establish a physics-informed and uncertainty-aware approach for non-invasive characterization of hidden defects and provide a quantitative basis for designing measurement strategies for inverse problems in solid mechanics.

Comment
26 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Gen2Physics: Grounding Generated 3D Meshes in Physics via Multi-View Material Decomposition

cs.CV ·2026-08-24 ·Mauro Comi, Jordi Serrano Berbel, Kevis-Kokitsi Maninis, Philipp Henzler, Manuel Sanchez
similarity 0.60
Abstract

While state-of-the-art generative models produce high-fidelity 3D meshes, these outputs lack the physical properties required for interactive simulation, gaming, or robotics. We introduce Gen2Physics, a unified and automated framework that grounds generated meshes in physics by automatically decomposing them into their constituent material components. Unlike prior approaches, which focus on volumetric representations incompatible with standard physics engines, Gen2Physics operates directly on meshes to produce immediately simulation-ready assets. Our pipeline integrates a fine-tuned Vision Transformer for dense material segmentation, a robust 2D-to-3D consistency projection, and a Vision-Language Model (VLM) guided refinement that leverages contextual reasoning to assign physical properties and infer internal geometry (solid vs. hollow). By converting surface patches into volumes with distinct densities, our method enables physically plausible dynamic simulations. Experimental results on the ABO-500 and PartNet-Material benchmarks demonstrate that Gen2Physics more than doubles the material segmentation accuracy of prior physics-grounding pipelines (15.6 to 48.3 mIoU), while matching the mass-estimation accuracy of volumetric methods and being the only approach to output watertight per-material sub-meshes.

0.47

Structure from Collision via Hypothesis-Space Reasoning

cs.CV cs.AIcs.GRcs.LG+1 ·2026-11-05 ·Takuhiro Kaneko
publishedbenchmarkcode/data similarity 0.58
Abstract · Accepted to WACV 2027. Project page: https://www.kecl.ntt.co.jp/people/kaneko.takuhiro/projects/sfc-hypothesis/

Knowledge of the hidden interior structure of an object, including the presence and location of cavities, is essential for predictive simulation, robotic manipulation, and nondestructive inspection. However, such cavities leave no direct signature on the static visible surface, making collision-induced deformation one of the few cues used to infer their presence. Structure from Collision (SfC) addresses this problem by recovering the hidden interior structure of an object from multiview observations of a collision event. SfC is challenging for two reasons: hidden cavities are only indirectly observable through surface motion, and voids correspond to the absence of material, making direct optimization using standard density representations difficult. The density-based SfC baseline inherits both difficulties. Surface-matching gradients do not directly indicate the cavity location, while density gradients can be weak or uninformative inside or near void regions. Therefore, we reformulate SfC as hypothesis-space reasoning, representing hidden cavities as explicit structural hypotheses whose variables encode available structural assumptions rather than relying on implicit density updates. A global stage performs gradient-free optimization over this hypothesis space using forward-only material point method (MPM) simulation. A local stage then refines the selected hypothesis as a Lagrangian particle system through gradient-based optimization using differentiable MPM simulation. On the SfC benchmark, our method improves hidden-structure reconstruction and future prediction over the density-based SfC baseline. Interior-topology stress tests and robustness analyses characterize its scope and limitations. The project page is available at https://www.kecl.ntt.co.jp/people/kaneko.takuhiro/projects/sfc-hypothesis/.

0.54

BRIDGE: Bridging Routine Inputs and Digital modelling for Geotechnical Engineering

cs.CE ·2026-10-02 ·Roshan Philip Saji, Waleed El-Sekelly, Tarek Abdoun, Mostafa E. Mobasher
similarity 0.57
Abstract

The mechanical properties needed for geotechnical design require laboratory tests and are thus available for far fewer field samples than routinely measured basic (index) properties which are available for nearly every sample. We term this difference as the characterization gap. Purely data-driven models do not explicitly enforce physical laws and may be unreliable beyond their training domain, while direct constitutive calibration preserves physical consistency but requires advanced laboratory data and expert judgment. We therefore propose BRIDGE (Bridging Routine Inputs and Digital modelling for Geotechnical Engineering) a modular framework that predicts mechanical properties from routinely available basic properties. BRIDGE screens the dataset for outliers and non-physical responses, bins the retained samples into Cells, and selects a small calibration dataset from each Cell, while the remaining samples are used for validation. A mechanical model is then calibrated for each calibration sample, and the converged calibrations collectively define the mechanical surrogate of the Cell together with its parameter ranges and the corresponding predictive envelope in the mechanical property space. A Cell is validated when most validation samples fall within this envelope, whereupon the surrogate can predict the mechanical property ranges of new samples whose basic properties lie within the Cell. In this work, we adopt a finite element implementation of the Extended Cam-Clay (ECC) constitutive model as the mechanical model, whose four parameters are calibrated in a multi-stage process. Applied to the Tokyo-CLAY/14/67760 database, BRIDGE predicts the mechanical properties of an entire Cell from calibrations of just 10 to 20% of its samples. Finally, since the mechanical model, the binning criteria, and the sampling method are components of BRIDGE, the framework is easily extensible.

0.25

Generative Learning on Manifolds for Probabilistic Seismic Performance Assessment and Structural Identifiability

cs.LG physics.geo-phphysics.data-anstat.ML ·2026-10-21 ·Dimitris G Giovanis, Ioannis G Kevrekidis, Roger G Ghanem
similarity 0.55
Abstract

Seismic performance assessment relies on computationally expensive nonlinear simulations, limiting uncertainty quantification and inference of structural properties from observed responses. We develop a manifold-based generative framework that learns the joint distribution of uncertain structural parameters and seismic-response trajectories from limited high-fidelity simulations. Combining Diffusion Maps, score-based Diffusion Modeling, and Geometric Harmonics, the framework enables both forward probabilistic prediction and inverse inference. Applied to a nine-story steel moment-resisting frame, the results reveal which structural properties are identifiable from seismic performance and how uncertainty in these properties influences response. In particular, the learned representation captures post-capping degradation characteristics more effectively than individual strength parameters. Inverse inference identifies distinct structural configurations that produce similar seismic performance, with representative solutions independently validated using nonlinear simulations. These findings demonstrate how generative learning can support uncertainty-aware seismic assessment while revealing structural non-identifiability and alternative mechanisms underlying observed performance

0.19

An end-to-end framework for uncertainty-aware validation of generative models

cs.LG stat.MLhep-exhep-ph ·2026-10-27 ·Giada Badaracco, Sean Benevedes, Christina Reissel, Philip Harris, Gaia Grosso
benchmark similarity 0.54
Abstract

Density estimation with generative models is a common task in the physical sciences, for example in background estimation in particle physics. Existing machine learning techniques, however, lack methods to quantify uncertainties that can be propagated into a statistical test. That limits the validation of generative models to standard goodness-of-fit tests, in which the generative model is treated as exact (point-null hypothesis). But a model fitted to a finite training set is never exact, so if its uncertainties are neglected, any sufficiently powerful goodness-of-fit test will eventually reject it once the test set is large enough to resolve this estimation error. We propose SIGMA, an end-to-end framework combining density estimation with principled uncertainty quantification. We use Gaussian mixture models, for which uncertainties are tractable, and further construct a new goodness-of-fit test in which these uncertainties are profiled as nuisance parameters to account for the statistical error of the fit, promoting the conventional point-null test to a composite one. A rejection then signals genuine mismodeling rather than a test set large enough to resolve the error of the fit, provided the propagated uncertainties faithfully cover that error. We demonstrate the framework on a controlled two-dimensional toy model and on a collider physics benchmark modeling the QCD background process. With uncertainties included, the same model can be trusted on test sets up to an order of magnitude larger than the standard test allows. Our work thus provides a statistically grounded basis for a robust use of generative models in the physical sciences.

0.29

Generating Heterogeneous 3D Geological Microstructures from 2D Images via a Stable Diffusion-Adversarial Model

cs.AI ·2026-09-17 ·Ali Aouf, Eric Laloy, Bart Rogiers, Christophe De Vleeschouwer
similarity 0.54
Abstract

Characterizing the physical properties of clay and cementitious materials matters across many fields, from materials science to geological waste disposal. Property simulation typically calls for 3D imaging, which is expensive, not always accessible, and technically limited for certain materials. Recent progress in deep generative models offers a way around this, reconstructing 3D volumes from the more easily acquired 2D images. Among GAN-based methods for 3D microstructure generation, SliceGAN has shown strong results for homogeneous isotropic and anisotropic systems. It struggles, however, to capture the finer detail of more complex heterogeneous microstructures, which motivates alternative generative frameworks. We introduce a hybrid approach that draws on the stability and generation quality of denoising diffusion models. Since no 3D ground truth is available, we replace the standard denoising loss with an adversarial loss, which yields a stable training process in our experiments. We show that the resulting model generates microstructures of varying complexity with minimal slice artefacts and close agreement with ground-truth phase fractions and structural descriptors.

0.17

InstructMesh: Selective Refinement of Generative 3D Models for Fabrication

cs.AI ·2026-08-28 ·Faraz Faruqi, Ahmed Katary, Demircan Tas, Theresa Hradilak, Ning Zhang +8 more
top venue similarity 0.53
Abstract

Recent advances in generative AI allow users to create 3D models from text or images. However, these models prioritize visual plausibility over geometric accuracy, often generating results with flaws that compromise their intended use post-fabrication. We present InstructMesh, an interactive post-generation refinement tool that enables selective repair of generative 3D models through region selection and targeted operations, such as opening or sealing voids, or adjusting local thickness. Users can invoke edit operations via natural language prompts or slider controls. By operating directly on the intermediate latent representation, InstructMesh allows users to apply robust geometric corrections without requiring expert modeling skills. To inform our design, we first analyze common fabrication-related failure modes in outputs from state-of-the-art generative tools. We then conduct two user studies, demonstrating that novices can identify and perform fabrication-relevant repairs on generative outputs using InstructMesh, and revealing user preference for hybrid interfaces that combine slider controls with natural language input.

0.37

Generative Design with Real-time Physics Explainability: Towards Product Definition in the Age of AI

cs.LG physics.comp-ph ·2026-11-12 ·M. de Campos, C. Drygala, E. Ross, A. Bruce, M. Bohon +1 more
similarity 0.53
Abstract

In this article, we explore opportunities from using generative AI in mechanical engineering. On the one hand, generative methods based on invertible neural networks have been recently proposed for the solution of inverse design problems, allowing to infer design parameters from performance labels. On the other hand, generative AI models have shown that they can act as real time capable surrogates for physics based simulations. Here we suggest that these two streams should be combined in a unified framework, where INN are used to control the design process from the customer requirements perspective and the generative simulation of the systems physics adds a layer of explainability, why the proposed design fulfils the requirements. As generative design is prone to hallucinations, we propose uncertainty quantification to fend off physically infeasible requests. Finally, validation with classical tools is a requirement for generative design process. To demonstrate the capabilities of our novel generative design paradigm, we develop two interactive environments, one for airfoil design based on simulator data and one for the combustor design space exploration based on measured data.

0.14