CS Paper Radar

InsertAnything: Generalizable Contact-Rich Precision Insertion from Simulation to Reality

Zhenghua Ma, Xinpan Meng, Zeyu Liu, Muyuan Ma, Hengdi Zhang, Houcheng Li, Long Cheng

cs.RO ·submitted 2026-09-21 12:51 UTC · v1
benchmarkcode/data

Abstract

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

Closest papers

Nearest neighbours by meaning across the whole index.

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.74
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Hybrid Residual Reinforcement Learning for Contact-Rich Robotic Book Insertion

cs.RO ·2026-09-17 ·Tianyuan Liu, Rutherford Agbeshi Patamia, Benjamin Champion, Akansel Cosgun, Richard Dazeley
similarity 0.73
Abstract · 8 pages, 8figures

Placing a grasped book into a tight shelf is a compact but difficult contact-rich control problem: millimetre-scale pose error can turn a geometrically valid approach into jamming, failed release, or incomplete seating. We study this final phase after grasp acquisition and global approach, and ask how control authority should be divided between known geometry and learned behaviour. Our method retains a nominal task-space controller for structured insertion and seating, while residual PPO supplies bounded local corrections and decides when to release. Only the brief open-retreat-reclose transition is scripted. For the final policy used on hardware, a deployment-matched simulation evaluation over 512 fixed conditions yields 98.50 percent mean success (0.23 percentage-point sample SD) across three independent training runs, compared with 37.89 percent for nominal control. On the physical xArm7, 60 trials over 30 matched conditions show the same qualitative advantage: residual control raises success from 26.7 percent to 63.3 percent, reduces failures from 22 to 11, and wins 13 of the 15 matched conditions in which the two controllers differ. Robustness tests show that performance remains above 87 percent under initialization perturbations up to 1.5x, while very tight clearances expose the geometric limit of local correction. These results support a hybrid design in which geometry preserves reliable task structure and learning is concentrated on the contact-sensitive behaviour that fixed rules handle poorly.

0.31

Learning to Leverage Compliance: A Policy-Admittance Learning Framework for Robotic Insertion

cs.RO ·2026-09-25 ·Chongren Wang, Minghe Li, Honghua Dai, Zhicheng Lin, Shiyang Wei +1 more
similarity 0.72
Abstract

Policy learning and compliant control offer a promising route to reliable autonomous assembly under pose errors and contact uncertainty. However, combining them does not ensure coordination: the policy may continue pushing against contact while the controller yields, producing sustained loading with limited progress. To address this problem, we propose LeCo (Leverage Compliance), a policy-admittance learning framework that guides a visual policy through execution-time interaction under fixed admittance. A multirate feedback mechanism aggregates high-rate contact-interaction records into policy-transition rewards. An integrated conflict cost then characterizes sustained policy-loading/controller-unloading opposition, while a directional high-force tail cost captures continued-loading events within a transition. Together with task completion, these costs encourage the policy to leverage compliance with less unproductive loading. We evaluate LeCo on four real connector-assembly tasks, obtaining an aggregate success rate of 94%. Across tasks, mean successful-trial resultant-force and torque peaks decrease by approximately 30% and 64% relative to the comparison baseline. Reward ablation further shows that adding conflict shaping reduces median successful-trial contact-conditioned conflict density by approximately 53%. These results support learning to leverage fixed compliance by turning multirate policy-admittance interaction into complementary reward signals for effective, lower-load insertion.

0.23

One-Shot Learning from Demonstration of Contact-Rich Robotic Manipulation by Identifying Physical Interactions

cs.RO ·2026-08-25 ·A. H. G. Overbeek, H. van der Kooij, M. Vlutters
similarity 0.72
Abstract

Learning from Demonstration (LfD) allows robots to learn manipulation tasks directly from humans, thereby supporting the versatile application of robots. Most LfD methods do not explicitly model the physical interactions between a robot and its environment, such as the making and breaking of contact, while these are crucial during manipulation tasks. Because the same basic physical interactions recur often, they can be a basis for robust, generalizable, and adaptive task reproduction. We propose an LfD method that explicitly uses what physical interactions take place where and when. Using that information, a hybrid position-force controller tracks demonstrated trajectories until contact-based transition conditions from the demonstrations are met. We evaluate our method in real robot experiments consisting of opening doors and locks, bolt picking and screwing, dislodging, and surface contouring. We show that explicitly modeling physical interactions benefits LfD in four ways. First, by allowing reproduction of complex, sequential, and contact-rich manipulation tasks using only a single demonstration and no prior knowledge of the task. Second, by facilitating robustness to unknown geometric variations in the environment. Third, by facilitating generalization when geometric variations are known. Fourth, by facilitating online adaptation using geometric information explored during task reproduction. We discuss how robustness, generalization, and adaptivity can be explicitly implemented, which is generally lacking in the LfD literature. Thereby, our work aims to close a gap in interpretable few-shot LfD of robotic manipulation.

0.07

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.72
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

Assembling Two Parts in One Hand

cs.RO ·2026-09-09 ·Liuao Pei, Tianyue Wu, Hui Zhang, Ping Luo, Jie Song
publishedbenchmarkcode/data similarity 0.71
Abstract · To appear on Conference on Robot Learning (CoRL) 2026. Project website: https://ltbgbird.github.io/in-hand-assembly-page/

A hallmark of human dexterity is the cooperative use of fingers, where different fingers take on distinct yet coordinated roles to accomplish fine manipu- lation, such as capping a pen with the hand that holds it. We study this finger-level coordination through in-hand assembly: mating two rigid objects within a single dexterous hand, with no second arm and no fixture. We present a reinforcement learning formulation to solve this problem in a unified framework, which is driven by a goal relative pose between the two parts. Finger coordination is shaped by a function-based auxiliary reward and regularized toward a single human reference pose, while domain randomization and a fusion of historical proprioception and object observation confer robustness to occlusion-induced estimation noise. The same recipe solves three different assembly tasks (Bottle, Syringe, and Marker). Trained purely in simulation, the policies transfer zero-shot to hardware with a single camera, demonstrating robustness to state-estimation errors caused by oc- clusion. Our experiments also reveal that in-hand assembly places demands on hand morphology and can serve as a benchmark for modern robotic hand systems. Videos and code are available at https://ltbgbird.github.io/in-hand-assembly-page/.

0.63

Residual Compliant Policy: Learning Compliant Policies from Few Demonstrations

cs.RO ·2026-10-01 ·Chunyu Jiang, Yichen Cai, Shuai Li, Wenbin Sun, João Carvalho +4 more
similarity 0.71
Abstract · 9 pages, 6 figures. Project website: https://residual-compliant-policy.github.io

Contact-rich manipulation requires a robot to be precise in free space to establish the intended contacts, and compliant once in contact to avoid excessive forces. Imitation learning has proven effective for simpler manipulation tasks, but the compliance underlying a demonstration is not directly observable and is therefore difficult to infer from demonstration data alone. We present a framework that makes compliance explicit at every stage. During data collection, the operator teleoperates the real robot while a synchronized digital twin visualizes the error between the commanded reference and the achieved pose, making the current compliance visible, and selects between two discrete compliance modes. To generalize across object poses, we combine Laplacian editing, which retargets trajectories efficiently but is not physics-consistent during contact, with simulation-based trajectory optimization, which enforces physical plausibility but offers no manual guidance. Finally, a residual reinforcement learning policy refines the interaction forces by adjusting the reference pose of the underlying admittance controller. We evaluate on three flipping and pushing tasks on a Franka FR3 based on a total of 7 demonstrations across tasks. Our method is successful on all 40 out-of-distribution trials, compared to 33/40 and 24/40 for two baselines, with our base policy alone reaching 35/40.

0.27

ArtManip: Category-Level Articulated In-Hand Manipulation

cs.RO ·2026-09-11 ·Yang Yang, Tengyu Liu, Puhao Li, Zeyuan Chen, Yuyang Li +4 more
similarity 0.71
Abstract

Category-level in-hand manipulation of articulated objects is a formidable yet underexplored challenge for dexterous robotic hands. This difficulty stems from two core bottlenecks: first, controlling an object's internal degrees of freedom is tightly coupled with maintaining grasp stability on a free-floating base; second, acquiring diverse object models and functional grasps at scale is highly labor-intensive, yet vital for generalization given the system's sensitivity to initial configurations. In this work, we present ArtManip, the first category-level articulated in-hand manipulation method that generalizes across object instances and diverse initial grasps. For initial configuration construction, we develop an automated pipeline that procedurally generates diverse articulated objects and synthesizes task-oriented functional grasps. For policy learning, we propose a robust two-stage training strategy that incorporates articulation physics randomization, reward curriculum, and latent representation distillation to handle complex contact and joint dynamics during deployment. Extensive experiments across four object categories demonstrate that our policy generalizes to unseen instances and varied configurations in simulation, and achieves zero-shot transfer to 12 real-world objects featuring diverse shapes and joint mechanics.

0.39