CS Paper Radar

Modal Integrators for Isogeometric Stabilization of Outliers

Sreeram Shankar

cs.CE math.NA ·submitted 2026-09-19 08:06 UTC · v2
unusual

Abstract

High-order isogeometric discretizations produce a small number of non-physical outlier modes at the top of the discrete spectrum. These modes can pollute the numerical solution in wave propagation and structural dynamics. Most existing remedies modify the spatial discretization through outlier-free bases, mass lumping, subspace projection, and related constructions. We introduce MIISO (Modal Integrators for Isogeometric Stabilization of Outliers), a family of exponential Rosenbrock-Krylov methods of orders two through six that suppress the outliers in the time integrator and leave the spatial discretization unchanged. We construct a non-holomorphic amplification map by blending a Padé approximation that preserves physical oscillatory modes with a Pade approximation that damps high frequencies, with the blend placed at the known spectral location of the outliers. For orders three and higher the damping approximant is repaired so that the method is unconditionally A-stable. Physical modes receive no numerical dissipation and the outliers are driven to zero. The outlier handling and the method steps are fully matrix-free, and the method extends to nonlinear problems. Numerical experiments recover the predicted orders, match spatial outlier removal without changing the discretization, show lower cost than generalized-alpha at matched accuracy and in scaling, and demonstrate the method on nonlinear and three-dimensional problems.

Comment
44 pages, 28 figures

Closest papers

Nearest neighbours by meaning across the whole index.

$H_2$-optimal model order reduction using hyperbolic geometry

eess.SY math.NA ·2026-10-12 ·Andrea Angino, Tamás Dózsa, Matthias Voigt
benchmark similarity 0.47
Abstract

We revisit the problem of approximating a linear time-invariant LTI model by a reduced-order model (ROM) in an $H_2$-optimal sense. A widely used method for computing such ROMs is the iterative rational Krylov algorithm (IRKA). However, in practice, the stability of the resulting ROM is not generally guaranteed. In this work, we develop a novel framework that can be used to obtain $H_2$-optimal models of single-input single-output LTI systems while enforcing stability of the ROM. We use Malmquist-Takenaka orthogonal expansions in the corresponding $H_2$-spaces and their connection to hyperbolic geometry to develop an equilibrium function. We show that the poles of an $H_2$-optimal ROM transfer function are defined by the zeros of this equilibrium function. The resulting nonlinear root-finding problem is solved using a Newton-type method formulated on the products of Poincaré disk manifolds, where updates are performed along hyperbolic geodesics ensuring that the stability constraint is satisfied at every iteration. We present numerical experiments on benchmark systems for both discrete- and continuous-time LTI MOR problems, including examples where IRKA produces unstable reduced models while the proposed method preserves stability throughout the iteration.

0.42

FreKoo++: Learning Continuous Spectral Dynamics for Temporal Domain Generalization

cs.LG cs.AI ·2026-08-23 ·En Yu, Xiaoyu Yang, Wei Duan, Guangquan Zhang, Jie Lu
similarity 0.46
Abstract

Temporal Domain Generalization (TDG) aims to learn from historical domains and generalize to unseen future distributions under concept drift. Nevertheless, prevailing TDG methods struggle with complex real-world streaming scenarios involving both multi-scale drift patterns (e.g., long-term periodicity intertwined with short-term incremental changes) and local uncertainties, especially in continuous settings where observations arrive irregularly. To address this limitation, we propose FreKoo++, a novel continuous spectral-dynamical framework that pioneers the unification of continuous Koopman modal dynamics with adaptive spectral disentanglement. Specifically, FreKoo++ maps source-domain parameters into a compact latent space, modeling their evolution as a superposition of learnable continuous modes where complex eigenvalues jointly encode oscillatory frequency and temporal growth or decay. This formulation naturally accommodates irregular timestamps and supports arbitrary horizon extrapolation without rigid discrete stepping. Furthermore, we propose a new adaptive soft spectral weighting mechanism backed by stability and spectral regularization, which automatically isolates persistent dominant dynamics from transient noise without relying on manual frequency thresholds. We derive modal approximation and generalization bounds that characterize how amplitude and eigenvalue estimation errors propagate with the prediction horizon. Extensive experiments on both discrete and continuous TDG benchmarks demonstrate that FreKoo++ achieves state-of-the-art performance under complex multi-scale drifts and irregular sampling.

0.20

Stable Recovery and Benign Overparameterized Landscapes for Phase Retrieval from Coded Diffraction Patterns

cs.IT ·2026-09-25 ·Jian-Feng Cai, Zhibo Jin, Tong Wu, Ruizhe Xia
theory similarity 0.46
Abstract · 38 pages

Coded diffraction patterns (CDPs) provide a structured and physically relevant model for phase retrieval, but the dependence among Fourier measurements generated by a common mask makes sharp stability analysis challenging. For a fixed unit-norm signal $\boldsymbol{x}_\star \in \mathbb{C}^n$, let $\boldsymbol{X}_\star=\boldsymbol{x}_\star\boldsymbol{x}_\star^*$, and let $\mathcal A$ be the lifted CDP measurement operator. We prove that, with $L=O(\log n)$ random masks, the following uniform lower isometry holds with high probability: $\|\boldsymbol{X}-\boldsymbol{X}_\star\|_F \lesssim \log^2(2n) \frac{\|\mathcal A(\boldsymbol{X}-\boldsymbol{X}_\star)\|_2}{\sqrt{nL}}, \boldsymbol{X}\succeq\boldsymbol{0},$ from which we derive two consequences. First, for $\boldsymbol{y}=\mathcal A(\boldsymbol{X}_\star)+\boldsymbol{e}$, PhaseLift-type convex programs achieve the Gaussian-type stable recovery bound $\|\widehat{\boldsymbol{X}}-\boldsymbol{X}_\star\|_F \lesssim \frac{\log^2(2n)}{\sqrt{nL}}\|\boldsymbol{e}\|_2.$ Second, in the noiseless case, the nonconvex factorized loss has a benign landscape when the factor width satisfies $r = O(\log^5(2n))$: every second-order critical point $\boldsymbol{V}\in\mathbb C^{n\times r}$ satisfies $\boldsymbol{V}\boldsymbol{V}^*=\boldsymbol{X}_\star$. The key ingredient is a uniform operator-norm bound over row subsets of the dependent CDP measurement matrix, which permits the removal of a controlled set of adaptively selected rows while preserving tangent injectivity.

0.19

Learn Locally, Extend Globally: Koopman Eigenfunctions and the Basin of Attraction

eess.SY nlin.CD ·2026-11-13 ·Marcos Netto, Bukunmi Gabriel Odunlami, Aditya Kale, Andrey Bernstein
similarity 0.45
Abstract

Koopman eigenfunctions associated with the Jacobian eigenvalues of a stable equilibrium are Lyapunov functions defined exactly on its basin of attraction. We turn this into a computational procedure for power systems. Eigenfunctions estimated by extended dynamic mode decomposition (EDMD) are written as functions of the state, made to vanish at the equilibrium by centering the lifted variable $\cosδ$, and verified on a grid with the model: two Lyapunov candidates from the EDMD spectrum certify up to 66\% of the basin of a single-machine infinite-bus system from data in the linear region. The Koopman semigroup property then extends the EDMD-Lie eigenfunction to the whole basin, recovered at the grid resolution with its isostables and isochrons.

0.24

Spherical ESPRIT by Paired Small Circles and Infinitesimal Rotations

eess.SP math.CA ·2026-09-26 ·Albert Fannjiang
theory similarity 0.45
Abstract · 40 pages

We study the recovery of a finite three-dimensional point cloud from its spherical Fourier signal subspace at a fixed wavenumber. Two ESPRIT constructions are analyzed. The first uses finite shifts between paired small circles; the second uses angular derivatives on the whole sphere. Both recover the same commuting coordinate matrices, either through their finite exponentials or directly from a coupled linear system. We prove that the continuous generator system is injective for every distinct point cloud and that one guard harmonic degree preserves the retained equations exactly. For $s$ targets, the cutoff $K\ge s$ gives generic finite identifiability, but not uniform conditioning. We also derive a finite-cutoff perturbation bound. The accuracy of the coordinate estimates is a separate issue. A one-target perturbation calculation shows that the original generator estimate can retain a nonzero bias as the wavenumber increases. To address this bias, we use the generator eigenbasis to separate approximate atoms and recover their locations from amplitude-normalized phases. Under pointwise atom dominance, the resulting error is $O(κ^{-1})$; for a dominant two-atom mixture at fixed separation, it is $O(κ^{-2})$. Experiments on structured point clouds with smooth perturbations compare the two constructions and their use as initializers for a common MUSIC refinement.

0.25

Partitioned Co-Simulation for CAD-integrated Vibroacoustic Problems in Unbounded Domains

cs.CE cs.SEphysics.comp-ph ·2026-09-14 ·J. I. Camarotti, P. Le, Y. Cai, R. Aristio, D. Panagiotopoulos +2 more
benchmarkunusual similarity 0.44
Abstract · J. I. Camarotti and P. Le contributed equally to this work and share first authorship. Submitted to Engineering with Computers

Vibroacoustic analysis often requires coupling structural and acoustic solvers based on different numerical formulations and discretizations, making monolithic implementations intrusive and limiting software modularity and reuse. This work presents a partitioned co-simulation framework for exterior vibroacoustic analysis that couples an Isogeometric boundary representation analysis (IBRA) structural solver with an isogeometric boundary element method (IGA-BEM) acoustic solver. The methodology operates directly on the computer-aided design (CAD) boundary representation, preserving the exact geometry throughout the analysis and supporting both weak and strong coupling between non-conforming discretizations. A key contribution is the extension of the Aitken dynamic relaxation and Interface Quasi-Newton with Inverse Least-Squares (IQN-ILS) convergence accelerators to complex-valued interface quantities, allowing the coupling iterations to account directly for both amplitude and phase information. The approach is validated using one-way and two-way coupled vibroacoustic benchmark problems involving thin-shell structures and exterior acoustic domains. The results show excellent agreement with monolithic reference solutions, while the proposed complex-valued convergence accelerators improve the robustness and convergence behavior of the strongly coupled solution procedure without compromising solution accuracy. These results demonstrate that the proposed approach provides an accurate, robust, and modular approach for CAD-integrated frequency-domain vibroacoustic analysis.

0.28

JAXIGA - A software framework for GPU-enabled and differentiable isogeometric analysis

cs.MS math.NA ·2026-10-06 ·Cosmin Anitescu, Yongjie Jessica Zhang
benchmarkcode/dataunusual similarity 0.44
Abstract

In this paper, we present JAXIGA, an open-source library for isogeometric analysis based on JAX. The library separates the construction of the mesh from the computations which are traced for compilation and differentiation. This allows geometry evaluation, assembly and the supported solvers to be combined in a just-in-time compiled program, for which first-order reverse-mode derivatives can be computed. We consider three numerical methods obtained from a single pointwise energy density. The Galerkin and energy-minimization methods use the same discrete potential and have the same stationary points, while collocation enforces the corresponding strong form. The sensitivities of a converged solution are obtained by solving one adjoint problem, and their accuracy depends on the tolerances of both the primal and adjoint problems. We also describe hierarchical extraction for local refinement of the variational methods and the use of smooth spline spaces for fourth-order problems. The numerical results are compared with analytical solutions and independent FEniCSx and JAX-FEM computations. For the reported GPU benchmark with 36,448 unknowns, assembly is twenty-four times faster than on the host CPU. When the conjugate-gradient solver is also run on the GPU, the total solution time is reduced from 31.8 to 1.38 seconds, and the result agrees with the direct solution to $5\times10^{-11}$. These results show that the choice of solver and the reuse of compilation are important for obtaining an overall reduction in computational cost.

0.35

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.44
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27