CS Paper Radar

Lizard: Bandwidth-Adaptive Real-Time Video Analytics through Content-Aware Packet Discarding at Last-Mile Edge Routers

Shan Yu, Yu Chen, Yifan Qiao, Sheng Zhang, Ravi Netravali, Harry Xu

cs.NI cs.DC ·submitted 2026-09-22 07:46 UTC · v1
published

Abstract

The timeliness and accuracy of edge-based video analytics can be hindered by drastic reductions in available bandwidth (ABW) at last-mile edge routers, causing prolonged queuing delays. This work proposes Lizard, a system that leverages video-content-aware packet discarding to mitigate the negative effects of drastic ABW degradation that may frequently occur at a last-mile edge router by judiciously discarding packets that contain frame blocks less important to the analytics at the destination. To achieve this, we first devise a frame-block-aware RTP header extension to effectively decouple packet dependencies to encode frame blocks. Second, Lizard uses a priority-based feedback mechanism that dynamically evaluates packet priorities based on relative accuracy impacts. Third, we develop an adaptive phase-transition-based packet discarding strategy at the router to discard packets that represent unimportant blocks. Our evaluation of Lizard shows improvements over existing methods are substantial: 53.2% reduction in latency and 27.1% increase in analysis accuracy.

Comment
Extended version of the paper to appear in the 11th ACM/IEEE Symposium on Edge Computing (SEC 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Evict Early, Decode Efficiently: Lightweight Decoding Strategies for Low-Delay Sliding Window RLNC

cs.NI ·2026-10-20 ·Foteini Karetsi, Evangelos Papapetrou
similarity 0.63
Abstract · 14 pages, 7 figures

Random Linear Network Coding (RLNC), and in particular Sliding Window RLNC (SW-RLNC), is a promising approach for reliable, low-latency communication in dynamic environments such as 6G and non-terrestrial networks. While prior work has largely focused on encoder-side parameter tuning, such as the code rate and coding window size, decoder-side design remains comparatively underexplored despite its direct impact on end-to-end performance. This paper addresses decoding window management, namely the policies governing window-boundary updates, removal of obsolete packets, and delivery of recovered packets to upper layers, and shows that these policies critically shape the trade-off between computational complexity and decoding performance, particularly in-order delivery delay. We derive sufficient conditions under which packets can be safely removed from the decoding window without compromising decodability or violating in-order delivery guarantees, and, building on these conditions, propose two lightweight decoding window management schemes. Through extensive simulation-based evaluation across a range of channel conditions and code rates, we show that both schemes preserve decoding efficiency while substantially reducing decoding complexity, and that one additionally achieves a marked reduction in in-order delivery delay. These results establish decoding window management as a key design dimension for practical SW-RLNC systems.

0.27

Media-over-Multipath-QUIC for Realtime Video Applications

cs.NI cs.ETcs.MMeess.IV ·2026-08-11 ·Tanya Shreedhar, Zuji Zhou, Nitinder Mohan, Fernando Kuipers
similarity 0.61
Abstract · In review

Multipath transports place a client's WiFi, cellular, and satellite networks under one connection, yet real-time video gains little from them. The scheduler that assigns packets to paths sees only bytes, so it cannot tell a keyframe that anchors a second of video from an enhancement frame whose loss costs one image. We show that the limiting factor is not a shortage of path diversity but the absence of a channel through which the application can name what the transport cannot see. Media over QUIC Transport (MoQT), already deployed on production CDNs, carries media as named Objects, and relays forward each Object's metadata without interpreting it. The knowledge the scheduler lacks therefore already flows through the subscriber's relay. We present MoMQ, a MoQT extension that turns this metadata into path decisions. Applications and relay operators install declarative rules at the edge relay that match Object metadata and express delivery preferences against labeled paths. The relay evaluates the rules mechanically, so it acts on video semantics while containing no video logic. On a live testbed spanning Starlink and WiFi, four rules cut P99.9 frame completion time from 384.7 ms under the best transport-only scheduler to 114.1 ms and reduce the required playback buffer by 61.5%. MoMQ is the only configuration that meets the 150 ms interactive latency target. Across relays in two countries and subscribers on two continents, the same rules apply unchanged and retain their advantage wherever the paths remain disjoint.

0.04

ReLViC: Loss-Resilient Learned Video Coding with Dispersed Packetization and Controllable Packet Dependencies

eess.IV cs.MM ·2026-08-31 ·Xuyang Chen, Daquan Feng, Xianfu Chen, Xiang-Gen Xia
similarity 0.61
Abstract · 13 pages

Packet loss can severely impair learned video coding because missing latent tokens compromise both spatial reconstruction and temporal prediction. We present ReLViC, a loss-resilient learned video coding framework that jointly addresses latent coding and packet-loss recovery. ReLViC disperses spatially adjacent latent tokens across packets and employs a dual-purpose Transformer to estimate entropy-model parameters during coding and reconstruct missing latent tokens at the receiver. It controls packet dependencies through a periodic-reset packet-context topology parameterized by the segment length, thereby tuning the trade-off between compression efficiency and error-propagation range without retraining. A three-stage progressive training procedure establishes single-frame coding, learns temporal context for entropy modeling, and then optimizes the recovery of masked latent tokens under simulated packet loss. Experiments using burst-loss traces evaluate ReLViC against H.265 protected by Reed--Solomon forward error correction (FEC) and GRACE, a loss-resilient learned video codec. ReLViC delivers more stable reconstruction and outperforms both baselines under severe packet loss.

0.10

Rondo: Controlling Reordering in High-Throughput Packet Spraying

cs.NI ·2026-11-03 ·Xizhi Zhang, Zhongjie Chen, Yang Zhang, Fengyuan Ren
similarity 0.59
Abstract

Modern datacenter applications demand high network bandwidth, motivating packet-level multipath transport to exploit the aggregate capacity of multiple paths. However, packet reordering under packet spraying poses challenges for hardware transports. Excessive packet reordering makes it difficult to infer packet loss, imposes substantial pressure on NIC resources, and ultimately degrades performance. Existing transports either prioritize throughput without controlling packet reordering, or mitigate reordering by restricting transmissions, which leaves available path capacity unused. In this paper, we identify two fundamental sources of packet reordering: transient inter-path queueing differences caused by control dynamics, and persistent path-delay differences due to path heterogeneity. These observations motivate a joint design of a multipath controller and a packet scheduler to address transient and persistent delay differences, respectively. We present Rondo, a packet-level multipath transport that achieves both high throughput and low packet reordering. Its multipath controller uses ACK-based per-path capacity estimation and probing to maintain stable path loads, while its packet scheduler adjusts packet transmission order to compensate for persistent delay differences. Testbed experiments and large-scale simulations show that Rondo reduces the maximum out-of-order degree by up to 97.5% while maintaining high throughput. With constrained receiver buffers, Rondo achieves up to 8.51 times higher goodput.

0.19

RAPID: Proactive Rate Control for Enabling High Data Rate and Low Latency in 5G Edge Networks

cs.NI ·2026-10-09 ·Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos
top venuehighly cited similarity 0.59
Abstract

Many 6G use cases such as tactile Internet and eXtended reality applications would simultaneously require a high data rate and low latency wireless connectivity.It is increasingly being realized that the current transport protocols relying on packet loss and delay are insufficient to satisfy the data rate and latency requirements of such applications. To address this problem, we propose RAPID, a transport layer solution designed for private 5G edge networks, where the bottleneck is located at the base station. We show that by regulating the send rate to maintain a target physical resource block utilization, we can achieve high data rate, low latency communication. We design a simple yet effective policy that adapts to the dynamic nature of wireless channel conditions. In a multi-UE scenario with two RAPID flows and one TCP Cubic flow, our testbed results show that RAPID flows achieve significant improvements in one-way delay, i.e., 72x and 55x lower compared to TCP Cubic, with negligible packet loss at the cost of modest goodput reductions of 16% and 27%, respectively.

0.73

Scalable Packet Tracking on FPGAs for Erasure-Coded RDMA over Lossy WANs

cs.AR ·2026-09-18 ·Yicheng Qian, Konstantin Taranov, Yevgeny Yankilevich, Assaf Shacham, Mahmoud Elhaddad +3 more
published similarity 0.58
Abstract · This paper appeared in the 36th International Conference on Field-Programmable Logic and Applications https://2026.fpl.org/

Modern AI workloads increasingly rely on scale across architectures that interconnect multiple datacenters to form a single "AI factory", overcoming the power and cooling constraints of individual sites. However, extending Remote Direct Memory Access (RDMA) across wide area networks (WANs) introduces fundamental challenges: multi-path packet reordering, high latency, and packet loss that severely degrade performance. While erasure coding (EC) has emerged as a promising mechanism for loss recovery, its effectiveness critically depends on efficient packet arrival tracking implemented in hardware. We present COmpact Multi-path Erasure-coded Tracking (COMET), the first fully hardware-offloaded packet-arrival tracking design implemented on an FPGA-based network interface card (NIC) for multi-path RDMA over lossy WANs. COMET employs a scalable cache-based architecture that supports operation at high link rates. Our evaluation shows that COMET sustains line rate operation at 400 Gbps and beyond. Critically, COMET decouples on-chip memory footprint from link Bandwidth-Delay Product (BDP), and its cache-based architecture (COMET Cache) enables supporting 6 times more concurrent connections than state-of-the-art (SOTA) SoC-based designs. These results demonstrate that scalable, fully hardware-offloaded packet-arrival tracking is practical on FPGA-based NICs at current data rates, and its architectural scalability extends to emerging 1.6 Tbps NICs and beyond.

0.40

PRISM: RL-Based Rate Control for Low Latency and High Data Rate in Mobile Edge Networks

cs.NI ·2026-11-01 ·Hamid Hassani, Staji Wilson, Kishor C. Joshi, Sonia M. Heemstra, Ignas G. Niemegeers +1 more
similarity 0.58
Abstract

Emerging delay-sensitive interactive services, such as extended reality and remote operation, demand advanced congestion control algorithms (CCAs) capable of maintaining high data rates while keeping latency low in mobile networks. Existing CCAs typically rely on congestion signals such as packet loss, delay, or explicit congestion notification (ECN) marks, which can be delayed, imprecise, or require extensive upgrades to the network infrastructure. To address these limitations, physical resource block (PRB) utilization has recently been proposed as a reliable early congestion signal in mobile networks [1]. This paper introduces PRISM, a reinforcement-learning-based CCA that uses peak PRB utilization to regulate the send rate under challenging mobility and fading conditions. NS3 simulation results show that, in a mobility scenario where two PRISM flows coexist with two TCP Cubic flows and one TCP BBR flow, PRISM maintains a per-packet mean one-way delay (OWD) of 6.3ms and a $p_{99}$ OWD of 44.6ms, with negligible (0.02%) packet loss, over a 20min high-contention interval. However, over the same interval, the coexisting TCP flows experience 60x higher mean OWDs of 371-390ms and $p_{99}$ OWDs of 563-578ms, with 0.1% packet loss. PRISM achieves a 31x improvement in goodput-over-latency performance, indicating a favorable tradeoff for delay-sensitive applications.

0.11

Tokenized Joint Source-Network Coding for Loss-Resilient Video Streaming

eess.IV cs.MM ·2026-10-15 ·Ke Yang, Sixian Wang, Kailin Tan, Guo Lu, Jincheng Dai +2 more
similarity 0.58
Abstract

For decades, conventional video streaming systems have relied on packet-level forward error correction (FEC) codes and retransmissions to ensure reliable video delivery. However, in real-time communications, FEC is inherently inefficient under unknown and time-varying packet-loss conditions, while retransmission can incur excessive latency and fail to meet stringent playout deadlines. Emerging deep joint source-channel coding (DeepJSCC) provides an alternative by learning channel-noise-resilient representations, yet its tight coupling with the physical layer makes it difficult to integrate into today's layered network architectures and protocols. In this paper, we propose TokJSNC, a simple-but-effective tokenized joint source-network coding paradigm for packet-loss-resilient video streaming. Rather than first compressing video into a compact bitstream and then protecting it with packet-level FEC, TokJSNC directly encodes video into variable-length discrete token-stream, whose transmission rate is jointly adapted to video content complexity and network conditions. By exploiting the spatiotemporal correlations among learned video tokens, TokJSNC enables robust video reconstruction over a wide range of packet-loss rates without explicit FEC or retransmissions. Consequently, TokJSNC brings the JSCC-like graceful degradation property to the network layer while remaining compatible with existing network architectures and transport protocols. Experimental results show that TokJSNC maintains an average playback frame rate above 22 fps even at a 70% packet-loss rate, whereas the best-performing baseline drops below 12 fps. Overall, TokJSNC establishes a practical pathway for repurposing modern generative video tokenizers for loss-resilient streaming, while providing a fundamental framework for video token communications.

0.04