CS Paper Radar

RAPID: Proactive Rate Control for Enabling High Data Rate and Low Latency in 5G Edge Networks

Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos

cs.NI ·submitted 2026-10-09 15:38 UTC · v1
top venuehighly cited

Abstract

Many 6G use cases such as tactile Internet and eXtended reality applications would simultaneously require a high data rate and low latency wireless connectivity.It is increasingly being realized that the current transport protocols relying on packet loss and delay are insufficient to satisfy the data rate and latency requirements of such applications. To address this problem, we propose RAPID, a transport layer solution designed for private 5G edge networks, where the bottleneck is located at the base station. We show that by regulating the send rate to maintain a target physical resource block utilization, we can achieve high data rate, low latency communication. We design a simple yet effective policy that adapts to the dynamic nature of wireless channel conditions. In a multi-UE scenario with two RAPID flows and one TCP Cubic flow, our testbed results show that RAPID flows achieve significant improvements in one-way delay, i.e., 72x and 55x lower compared to TCP Cubic, with negligible packet loss at the cost of modest goodput reductions of 16% and 27%, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

One-Way Delay Model for 5G Low Latency, High Data Rate Communications

cs.NI ·2026-10-09 ·Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos
publishedhighly cited similarity 0.71
Abstract

Achieving low delay and high data rate communication in 5G requires preventing persistent queue backlogs at path bottlenecks. A key indicator of queue buildup is an increase in one-way delay (OWD) of packets. However, accurately measuring OWD is challenging due to synchronization issues between the sender and receiver. Moreover, using OWD to infer the onset of queueing can be inefficient. For instance, congestion control mechanisms that rely on latency as a congestion signal may result in cellular network underutilization, see, e.g., [1]. Thus, to develop more efficient rate control approaches, it is crucial not only to estimate OWD accurately but also to perform a more fine-grained analysis that provides detailed insights into the queue status. This paper presents a framework for modeling OWD in 5G edge networks, where the wireless link is typically the path bottleneck. %, by modeling it through measurable delay components. We demonstrate that OWD is dominated by queueing delay (QD), particularly at high data rates. We analyze QD by decomposing it into two main components: aggregation delay and channel access time. Aggregation delay can be accurately measured at the user equipment (UE), and channel access time can be estimated based on network conditions. Our key contribution shows that QD, while challenging to measure directly at the base station (BS), can be closely approximated by combining these components. We validate this model through NS3 simulations under varying network loads and single- and multi-UE scenarios. This framework provides a foundation for developing advanced mechanisms for congestion control and bottleneck detection in 5G networks.

0.67

PRISM: RL-Based Rate Control for Low Latency and High Data Rate in Mobile Edge Networks

cs.NI ·2026-11-01 ·Hamid Hassani, Staji Wilson, Kishor C. Joshi, Sonia M. Heemstra, Ignas G. Niemegeers +1 more
similarity 0.71
Abstract

Emerging delay-sensitive interactive services, such as extended reality and remote operation, demand advanced congestion control algorithms (CCAs) capable of maintaining high data rates while keeping latency low in mobile networks. Existing CCAs typically rely on congestion signals such as packet loss, delay, or explicit congestion notification (ECN) marks, which can be delayed, imprecise, or require extensive upgrades to the network infrastructure. To address these limitations, physical resource block (PRB) utilization has recently been proposed as a reliable early congestion signal in mobile networks [1]. This paper introduces PRISM, a reinforcement-learning-based CCA that uses peak PRB utilization to regulate the send rate under challenging mobility and fading conditions. NS3 simulation results show that, in a mobility scenario where two PRISM flows coexist with two TCP Cubic flows and one TCP BBR flow, PRISM maintains a per-packet mean one-way delay (OWD) of 6.3ms and a $p_{99}$ OWD of 44.6ms, with negligible (0.02%) packet loss, over a 20min high-contention interval. However, over the same interval, the coexisting TCP flows experience 60x higher mean OWDs of 371-390ms and $p_{99}$ OWDs of 563-578ms, with 0.1% packet loss. PRISM achieves a 31x improvement in goodput-over-latency performance, indicating a favorable tradeoff for delay-sensitive applications.

0.11

Evict Early, Decode Efficiently: Lightweight Decoding Strategies for Low-Delay Sliding Window RLNC

cs.NI ·2026-10-20 ·Foteini Karetsi, Evangelos Papapetrou
similarity 0.63
Abstract · 14 pages, 7 figures

Random Linear Network Coding (RLNC), and in particular Sliding Window RLNC (SW-RLNC), is a promising approach for reliable, low-latency communication in dynamic environments such as 6G and non-terrestrial networks. While prior work has largely focused on encoder-side parameter tuning, such as the code rate and coding window size, decoder-side design remains comparatively underexplored despite its direct impact on end-to-end performance. This paper addresses decoding window management, namely the policies governing window-boundary updates, removal of obsolete packets, and delivery of recovered packets to upper layers, and shows that these policies critically shape the trade-off between computational complexity and decoding performance, particularly in-order delivery delay. We derive sufficient conditions under which packets can be safely removed from the decoding window without compromising decodability or violating in-order delivery guarantees, and, building on these conditions, propose two lightweight decoding window management schemes. Through extensive simulation-based evaluation across a range of channel conditions and code rates, we show that both schemes preserve decoding efficiency while substantially reducing decoding complexity, and that one additionally achieves a marked reduction in in-order delivery delay. These results establish decoding window management as a key design dimension for practical SW-RLNC systems.

0.27

Decentralized Latency Models and Information Flow for TSN Shapers - A Tutorial

cs.NI ·2026-10-08 ·Alexej Grigorjew, Stefan Geissler, Jürgen Schmitt, Tobias Hossfeld
similarity 0.61
Abstract · This work has been submitted to IEEE COMST for possible publication. Copyright may be transferred without notice, after which this version m…

Recent advancements in the fields of industrial automation and in-vehicle communication have also increased the requirements on their underlying networks. Traditional field bus technologies are being replaced by regular Ethernet devices with features from the IEEE Time-Sensitive Networking working group. Their standards are designed to achieve zero congestion loss and deterministic latency bounds, but the specific guarantees can differ depending on the shapers used and how the bounds are calculated. After several contributions to the standardization efforts, this work presents a number of decentralized latency models that can be applied locally on the switches, without requiring global knowledge from the rest of the network. It includes a formal definition of delay segments that allows to incorporate interoperability between different shapers and latency models in the future. It presents pseudo-code suggestions for the latency bounds computation of Strict Priority, Credit-Based Shaping, Asynchronous Traffic Shaping, and Cyclic Queuing and Forwarding, all of which can be applied locally on the devices. Finally, five models were implemented and evaluated with respect to their efficiency in terms of latency, jitter, and number of accepted streams. The results illustrate how different shapers are suited for different networks and traffic distributions.

0.32

Lizard: Bandwidth-Adaptive Real-Time Video Analytics through Content-Aware Packet Discarding at Last-Mile Edge Routers

cs.NI cs.DC ·2026-09-22 ·Shan Yu, Yu Chen, Yifan Qiao, Sheng Zhang, Ravi Netravali +1 more
published similarity 0.59
Abstract · Extended version of the paper to appear in the 11th ACM/IEEE Symposium on Edge Computing (SEC 2026)

The timeliness and accuracy of edge-based video analytics can be hindered by drastic reductions in available bandwidth (ABW) at last-mile edge routers, causing prolonged queuing delays. This work proposes Lizard, a system that leverages video-content-aware packet discarding to mitigate the negative effects of drastic ABW degradation that may frequently occur at a last-mile edge router by judiciously discarding packets that contain frame blocks less important to the analytics at the destination. To achieve this, we first devise a frame-block-aware RTP header extension to effectively decouple packet dependencies to encode frame blocks. Second, Lizard uses a priority-based feedback mechanism that dynamically evaluates packet priorities based on relative accuracy impacts. Third, we develop an adaptive phase-transition-based packet discarding strategy at the router to discard packets that represent unimportant blocks. Our evaluation of Lizard shows improvements over existing methods are substantial: 53.2% reduction in latency and 27.1% increase in analysis accuracy.

0.33

A mechanism for TCP-aware Active Queue Management in packet-forwarding devices

cs.NI ·2026-10-17 ·Swarnarup Bhunia, Somit Gond, Vayun Goel, Sreelakshmi Manjunath, Padmanabhan Rajan
similarity 0.59
Abstract

The deployment of Active Queue Management (AQM) policies is known to be a promising solution to bufferbloat, the problem of persistently-full large buffers in Internet routers. However, most AQMs involve tunable parameters, and some require awareness of the characteristics of the transport-layer protocol implemented at the end systems, thereby rendering their deployment infeasible. We consider one such AQM-- a threshold-based queue policy which requires the packet-dropping threshold to be co-designed with relevant TCP parameters. We propose a mechanism that detects network congestion, estimates the congestion window evolution in the end hosts, estimates the required TCP parameter, and produces an optimal value of the packet-dropping threshold. Arguments based on analysis of the TCP fluid model are presented to substantiate the proposed mechanism. A simulation-based performance evaluation reveals the effectiveness of the proposed mechanism, compared to some widely implemented queue policies, in terms of various user- and system-oriented metrics. The proposed mechanism is particularly well-suited for implementation in Software Defined Networks (SDN) where the algorithms can run in the SDN controller and the packet-dropping threshold can be implemented in the data-plane switches through open interfaces.

0.15

Scaling 5G-TSN Bridges: Operating Regimes, Scheduling, and Time Synchronisation Under Heterogeneous Industrial Traffic

cs.NI ·2026-08-14 ·Mohamed Seliem, Utz Roedig, Cormac Sreenan, Dirk Pesch
published similarity 0.58
Abstract · This version is the preperint of an accepted paper at MSWiM'26, the final version will appear in the conference proceedings

3GPP Release 16 enables a 5G system to operate as a transparent IEEE 802.1 TSN bridge, but its scalability under heterogeneous industrial workloads remains insufficiently characterised. This paper uses the nascTime framework on OMNeT++/Simu5G to evaluate how many TSN endpoints a single 5G NR cell can bridge before per-flow QoS degrades. We model closed-loop control, machine vision, bulk telemetry, and IEEE 802.1AS traffic over a four-bearer SDAP architec- ture, varying the number of endpoints from 1 to 40, MAC scheduler, radio bandwidth (10 MHz and 20 MHz), and channel model. Results show three operating regimes. Below saturation, non-DRR schedulers perform similarly; near saturation, QoS- aware PF reduces critical-flow P99 latency by up to two or- ders of magnitude relative to channel-aware and fairness-based schedulers; and under overload, only QoS-PF maintains near- complete delivery for the highest-priority traffic. Across the two evaluated bandwidths, the saturation threshold approximately doubles when bandwidth doubles. We also show that isolating IEEE 802.1AS/gPTP traffic on a dedicated high-priority radio bearer reduces clock-servo instability, although endpoints carry- ing lower-priority data still experience elevated synchronisation delay under saturation because of reduced MAC scheduling frequency. Finally, the evaluated sub-6 GHz, 30 kHz-SCS con- figuration exhibits an effective latency floor of approximately 2.25 ms, indicating that sub-3 ms TSN deadlines may require radio-configuration changes such as configured grants or higher numerology

0.27

Extending Low Latency Service Across the Internet

cs.NI ·2026-08-27 ·Harkirat Singh, Fatih Berkay Sarpkaya, Hakan Gulec, Fraida Fund, Shivendra Panwar
published similarity 0.58
Abstract · Accepted to the IEEE International Conference on Network Protocols (ICNP), 2026

Protocols such as L4S for low latency network services have attracted growing interest from major industry stakeholders such as Comcast, Apple, T-Mobile, and NVIDIA. However, L4S requires isolation between L4S flows and classic flows in order to maintain its low latency benefits and safe coexistence. The L4S architecture uses a DualPI2 AQM mechanism to provide this isolation when the bottleneck occurs at the home access link. In practice, however, bottlenecks may also occur at other locations in the network, such as peering points, ingress to wide area networks, or occasionally congested links in the core, where deploying DualPI2 AQM is not feasible. Without a solution to this problem, L4S may struggle to gain deployment, since its benefits may remain limited without end-to-end support. To address this challenge, we propose a deployment strategy that reduces the need to upgrade expensive core routers by using existing networking mechanisms such as BGP communities, SRv6, and priority queues with rate caps. We demonstrate the feasibility of this approach through large scale experiments on the FABRIC testbed. Our results demonstrate a practical deployment strategy for extending low latency service across the Internet, even across independently administered networks.

0.22