CS Paper Radar

One-Way Delay Model for 5G Low Latency, High Data Rate Communications

Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos

cs.NI ·submitted 2026-10-09 15:46 UTC · v1
publishedhighly cited

Abstract

Achieving low delay and high data rate communication in 5G requires preventing persistent queue backlogs at path bottlenecks. A key indicator of queue buildup is an increase in one-way delay (OWD) of packets. However, accurately measuring OWD is challenging due to synchronization issues between the sender and receiver. Moreover, using OWD to infer the onset of queueing can be inefficient. For instance, congestion control mechanisms that rely on latency as a congestion signal may result in cellular network underutilization, see, e.g., [1]. Thus, to develop more efficient rate control approaches, it is crucial not only to estimate OWD accurately but also to perform a more fine-grained analysis that provides detailed insights into the queue status. This paper presents a framework for modeling OWD in 5G edge networks, where the wireless link is typically the path bottleneck. %, by modeling it through measurable delay components. We demonstrate that OWD is dominated by queueing delay (QD), particularly at high data rates. We analyze QD by decomposing it into two main components: aggregation delay and channel access time. Aggregation delay can be accurately measured at the user equipment (UE), and channel access time can be estimated based on network conditions. Our key contribution shows that QD, while challenging to measure directly at the base station (BS), can be closely approximated by combining these components. We validate this model through NS3 simulations under varying network loads and single- and multi-UE scenarios. This framework provides a foundation for developing advanced mechanisms for congestion control and bottleneck detection in 5G networks.

Closest papers

Nearest neighbours by meaning across the whole index.

RAPID: Proactive Rate Control for Enabling High Data Rate and Low Latency in 5G Edge Networks

cs.NI ·2026-10-09 ·Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos
top venuehighly cited similarity 0.71
Abstract

Many 6G use cases such as tactile Internet and eXtended reality applications would simultaneously require a high data rate and low latency wireless connectivity.It is increasingly being realized that the current transport protocols relying on packet loss and delay are insufficient to satisfy the data rate and latency requirements of such applications. To address this problem, we propose RAPID, a transport layer solution designed for private 5G edge networks, where the bottleneck is located at the base station. We show that by regulating the send rate to maintain a target physical resource block utilization, we can achieve high data rate, low latency communication. We design a simple yet effective policy that adapts to the dynamic nature of wireless channel conditions. In a multi-UE scenario with two RAPID flows and one TCP Cubic flow, our testbed results show that RAPID flows achieve significant improvements in one-way delay, i.e., 72x and 55x lower compared to TCP Cubic, with negligible packet loss at the cost of modest goodput reductions of 16% and 27%, respectively.

0.73

QueueTrack: Framework for Detecting the Onset of Queueing in Mobile Networks

cs.NI ·2026-11-01 ·Hamid Hassani, Anudeep Karnam, Kishor Joshi, Sonia M. Heemstra, Ignas G. Niemegeers +1 more
published similarity 0.67
Abstract

In mobile networks, timely and accurate detection of the onset of queueing at path bottlenecks remains challenging for end-to-end congestion control algorithms (CCAs), where end hosts have limited visibility into queue status. Traditional congestion signals, such as packet loss, round-trip time (RTT), and one-way delay (OWD), have well-known limitations for early queue buildup detection. This paper presents QueueTrack, a practical end-host framework to detect the onset of queueing in mobile networks. QueueTrack computes a queue buildup indicator, denoted QBI, from endpoint-observable packet-level timing statistics, without requiring tight synchronization between end hosts or modifications to the existing network infrastructure. We develop and assess the complete QueueTrack machine learning (ML) pipeline, including data collection, labeling, model training, and testing, on a 5G testbed built on the OpenAirInterface platform, under a range of scenarios with competing TCP traffic. The experimental results show that QueueTrack can reliably detect the onset of queueing at the 5G base station using low-complexity classification models such as logistic regression. For example, QueueTrack achieves an F1 score of approximately 80% in a challenging mixed TCP/UDP scenario. These findings confirm that QueueTrack can serve as a practical framework for developing CCAs that target low delay, as well as for network telemetry and network monitoring in mobile networks.

0.26

PRISM: RL-Based Rate Control for Low Latency and High Data Rate in Mobile Edge Networks

cs.NI ·2026-11-01 ·Hamid Hassani, Staji Wilson, Kishor C. Joshi, Sonia M. Heemstra, Ignas G. Niemegeers +1 more
similarity 0.63
Abstract

Emerging delay-sensitive interactive services, such as extended reality and remote operation, demand advanced congestion control algorithms (CCAs) capable of maintaining high data rates while keeping latency low in mobile networks. Existing CCAs typically rely on congestion signals such as packet loss, delay, or explicit congestion notification (ECN) marks, which can be delayed, imprecise, or require extensive upgrades to the network infrastructure. To address these limitations, physical resource block (PRB) utilization has recently been proposed as a reliable early congestion signal in mobile networks [1]. This paper introduces PRISM, a reinforcement-learning-based CCA that uses peak PRB utilization to regulate the send rate under challenging mobility and fading conditions. NS3 simulation results show that, in a mobility scenario where two PRISM flows coexist with two TCP Cubic flows and one TCP BBR flow, PRISM maintains a per-packet mean one-way delay (OWD) of 6.3ms and a $p_{99}$ OWD of 44.6ms, with negligible (0.02%) packet loss, over a 20min high-contention interval. However, over the same interval, the coexisting TCP flows experience 60x higher mean OWDs of 371-390ms and $p_{99}$ OWDs of 563-578ms, with 0.1% packet loss. PRISM achieves a 31x improvement in goodput-over-latency performance, indicating a favorable tradeoff for delay-sensitive applications.

0.11

Delay and Throughput Analysis of Computation Offloading in Mobile Edge Computing: A Queueing Network Approach

cs.NI ·2026-09-05 ·Amirparsa Bahrami, Farid Ashtiani
similarity 0.63
Abstract

Mobile edge computing (MEC) enables mobile devices to offload computation to nearby edge servers and to the cloud in order to reduce end-to-end delay for different applications. In this paper, we study static computation offloading when each task consists of multiple dependent subtasks represented by a rooted directed tree. We develop a product-form queueing-network (PFQN) model with an approximation to capture the computation and communication dynamics of tree-structured task execution in a multi-tier MEC system. Based on this model, we derive closed-form expressions for server utilizations and waiting times, and then construct a recursive algorithm for evaluating the average delay of general tree-structured tasks. We formulate the static offloading design problem as the minimization of the rate-weighted average task delay over the routing probabilities, and solve it through a differentiable optimization framework based on softmax parameterization, log-sum-exp smoothing, and a stability barrier on server utilizations. Numerical results show that the proposed PFQN approximation provides accurate delay estimates and that the delay-optimized static policy consistently outperforms the considered baseline algorithms in terms of both average task delay and maximum stable throughput.

0.19

DualPI2 Active Queue Management in ns-3: Implementation And Validation

cs.NI ·2026-08-12 ·Maria Eduarda Veras, Eduardo Freitas, Assis T. de Oliveira Filho, Djamel Sadok, Judith Kelner
similarity 0.61
Abstract

The demand for ultra-low latency applications necessitates advanced network architectures like the Low Latency, Low Loss, and Scalable Throughput (L4S) standard. A core component of L4S is the DualPI2 Active Queue Management (AQM), which ensures the safe coexistence of scalable and classic traffic. Despite L4S's growing adoption, the ns-3 network simulator lacks a high-fidelity, up-to-date DualPI2 model. This paper presents a comprehensive implementation of the DualPI2 AQM in ns-3, while also mirroring the official Linux Kernel architecture. Our model incorporates representative mechanisms previously absent in simulation, such as credit-based Weighted Round Robin (WRR) scheduling, step-marking, and overload protection. To guarantee simulation accuracy, we validate our implementation against a physical Linux testbed across 25 diverse Bandwidth-Delay Product (BDP) scenarios. Results demonstrate that our ns-3 model replicates real-world behavior, ensuring strict throughput fairness and queue delay isolation. Ultimately, this validated model equips the research community with a robust tool to evaluate and advance L4S performance across diverse network topologies, ranging from data centers to wireless home and office environments.

0.04

Stochastic End-to-End Latency Modeling of the IoT-Edge-Cloud Continuum: Impact of Jitter and Traffic Variability on Deterministic Service Provisioning

cs.NI ·2026-08-26 ·Keyvan Aghababaiyan, Javier Gozalvez, Baldomero Coll-Perales
similarity 0.60
Abstract

6G will integrate communication and computing capabilities in a IoT-edge-cloud continuum, enabling nodes to distribute workloads across the continuum. To support time-sensitive services, both communications and computing latencies must be controlled. Two key sources of temporal variability are arrival-time jitter and traffic variability. They can both impact the timing at which data is generated, transmitted and processed, and the resulting fluctuations can propagate throughout the continuum, increasing latency uncertainty. This paper studies the impact of stochastic temporal variability on the ability to support end-to-end deterministic service levels across the continuum. To this end, we present a novel queueing-based end-to-end latency model for the continuum, which we openly release. The model jointly captures computing and communication latency, and characterizes the complete end-to-end latency distribution, including tail latency. Our analysis shows that services with stringent latency deadlines and larger computing demands are more sensitive to temporal variabilities, making local execution the preferred option. In contrast, services with more relaxed deadlines are more resilient to temporal variabilities when executed locally or at the edge despite higher average and tail latencies. Edge offloading is beneficial under good cellular connectivity and increasing local processing workloads, whereas cloud execution is more sensitive to traffic variabilities because of the additional communication latency. Our analysis also shows that services offloaded are more sensitive to traffic variability than jitter due to higher communication latencies. These findings highlight that effective service offloading must jointly consider service requirements and sources of temporal variability to guarantee deterministic service levels.

0.33

Decentralized Latency Models and Information Flow for TSN Shapers - A Tutorial

cs.NI ·2026-10-08 ·Alexej Grigorjew, Stefan Geissler, Jürgen Schmitt, Tobias Hossfeld
similarity 0.60
Abstract · This work has been submitted to IEEE COMST for possible publication. Copyright may be transferred without notice, after which this version m…

Recent advancements in the fields of industrial automation and in-vehicle communication have also increased the requirements on their underlying networks. Traditional field bus technologies are being replaced by regular Ethernet devices with features from the IEEE Time-Sensitive Networking working group. Their standards are designed to achieve zero congestion loss and deterministic latency bounds, but the specific guarantees can differ depending on the shapers used and how the bounds are calculated. After several contributions to the standardization efforts, this work presents a number of decentralized latency models that can be applied locally on the switches, without requiring global knowledge from the rest of the network. It includes a formal definition of delay segments that allows to incorporate interoperability between different shapers and latency models in the future. It presents pseudo-code suggestions for the latency bounds computation of Strict Priority, Credit-Based Shaping, Asynchronous Traffic Shaping, and Cyclic Queuing and Forwarding, all of which can be applied locally on the devices. Finally, five models were implemented and evaluated with respect to their efficiency in terms of latency, jitter, and number of accepted streams. The results illustrate how different shapers are suited for different networks and traffic distributions.

0.32

Evict Early, Decode Efficiently: Lightweight Decoding Strategies for Low-Delay Sliding Window RLNC

cs.NI ·2026-10-20 ·Foteini Karetsi, Evangelos Papapetrou
similarity 0.59
Abstract · 14 pages, 7 figures

Random Linear Network Coding (RLNC), and in particular Sliding Window RLNC (SW-RLNC), is a promising approach for reliable, low-latency communication in dynamic environments such as 6G and non-terrestrial networks. While prior work has largely focused on encoder-side parameter tuning, such as the code rate and coding window size, decoder-side design remains comparatively underexplored despite its direct impact on end-to-end performance. This paper addresses decoding window management, namely the policies governing window-boundary updates, removal of obsolete packets, and delivery of recovered packets to upper layers, and shows that these policies critically shape the trade-off between computational complexity and decoding performance, particularly in-order delivery delay. We derive sufficient conditions under which packets can be safely removed from the decoding window without compromising decodability or violating in-order delivery guarantees, and, building on these conditions, propose two lightweight decoding window management schemes. Through extensive simulation-based evaluation across a range of channel conditions and code rates, we show that both schemes preserve decoding efficiency while substantially reducing decoding complexity, and that one additionally achieves a marked reduction in in-order delivery delay. These results establish decoding window management as a key design dimension for practical SW-RLNC systems.

0.27