CS Paper Radar

Scaling 5G-TSN Bridges: Operating Regimes, Scheduling, and Time Synchronisation Under Heterogeneous Industrial Traffic

Mohamed Seliem, Utz Roedig, Cormac Sreenan, Dirk Pesch

cs.NI ·submitted 2026-08-14 15:29 UTC · v1
published

Abstract

3GPP Release 16 enables a 5G system to operate as a transparent IEEE 802.1 TSN bridge, but its scalability under heterogeneous industrial workloads remains insufficiently characterised. This paper uses the nascTime framework on OMNeT++/Simu5G to evaluate how many TSN endpoints a single 5G NR cell can bridge before per-flow QoS degrades. We model closed-loop control, machine vision, bulk telemetry, and IEEE 802.1AS traffic over a four-bearer SDAP architec- ture, varying the number of endpoints from 1 to 40, MAC scheduler, radio bandwidth (10 MHz and 20 MHz), and channel model. Results show three operating regimes. Below saturation, non-DRR schedulers perform similarly; near saturation, QoS- aware PF reduces critical-flow P99 latency by up to two or- ders of magnitude relative to channel-aware and fairness-based schedulers; and under overload, only QoS-PF maintains near- complete delivery for the highest-priority traffic. Across the two evaluated bandwidths, the saturation threshold approximately doubles when bandwidth doubles. We also show that isolating IEEE 802.1AS/gPTP traffic on a dedicated high-priority radio bearer reduces clock-servo instability, although endpoints carry- ing lower-priority data still experience elevated synchronisation delay under saturation because of reduced MAC scheduling frequency. Finally, the evaluated sub-6 GHz, 30 kHz-SCS con- figuration exhibits an effective latency floor of approximately 2.25 ms, indicating that sub-3 ms TSN deadlines may require radio-configuration changes such as configured grants or higher numerology

Comment
This version is the preperint of an accepted paper at MSWiM'26, the final version will appear in the conference proceedings

Closest papers

Nearest neighbours by meaning across the whole index.

Overload-Robust Latency in 5G-TSN: A HoL-Enhanced Hybrid Lyapunov Approach for 3GPP Indoor Factory Environments

cs.NI ·2026-09-22 ·Kouros Zanbouri, Md Noor-A-Rahim, Cormac J Sreenan, Dirk Pesch
similarity 0.65
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Private 5G networks are a key enabler for flexible industrial automation, especially when used in conjunction with Time-Sensitive Networking (TSN) technology. In this context, radio schedulers must multiplex safety-critical control traffic with bandwidth-hungry sensing streams over a fixed spectrum allocation. This paper proposes a Head-of-Line (HoL) Enhanced Hybrid Lyapunov scheduler for 5G-TSN networks that augments a drift-plus-penalty queue-stability core with an explicit head-of-line delay term and a class-isolation mechanism. The scheduler is evaluated in a 3GPP Indoor Factory scenario with standardized 3GPP fading, spatial consistency, and clutter blockage, using Automated Guided Vehicles (AGVs) generating concurrent URLLC, eMBB, and mMTC flows mapped to dedicated QoS-flow bearers. A fleet-size sweep of 5--30 AGVs on a fixed 20\,MHz carrier reveals a scheduler-independent capacity threshold at approximately 12 vehicles, verified by resource-block saturation. Below the threshold, the proposed scheduler is competitive with the strongest delay-aware baselines and its head-of-line term halves the URLLC deadline-miss ratio relative to the plain Lyapunov formulation. Beyond the threshold, it degrades selectively where the baselines collapse: at $2.5\times$ overload it delivers $1.8\times$ more URLLC traffic than the proportional-fair and delay-budget-aware baselines with a $\approx 4$--$7\times$ shorter 99th-percentile latency, resolving the capacity shortfall in favour of the critical classes instead of spreading it across the traffic mix, at a quantified cost in aggregate cell throughput. The results position Lyapunov-based scheduling as an attractive overload-robustness mechanism for industrial 5G deployments that must remain dependable under unexpected load conditions.

0.20

Det-5G: Closing the Determinism Gap in 5G-Advanced for Industrial Closed-Loop Control

cs.NI ·2026-09-07 ·Adnan Aijaz
published similarity 0.59
Abstract · Accepted for publication in the IEEE Next Generation Communications (NextGCom) conference 2026

The ultra-reliable low-latency communication (uRLLC) capability of 5G has created significant opportunities for industrial wireless connectivity, yet widespread use of cellular networks for closed-loop control remains challenging. Closed-loop control requires more than low packet latency and high reliability: cyclic command/feedback exchanges must complete within predictable time bounds despite changing channel conditions, recovery transmissions, mobility, and multi-device contention. This paper introduces Deterministic-5G (Det-5G), a unified radio resource allocation framework for industrial closed-loop control. Det-5G treats the complete bidirectional control cycle as the scheduling object and combines coordinated downlink/uplink allocation, adaptive bundled transmissions, group-oriented downlink communication, and optimized multi-user uplink scheduling over 5G air-interface. Its performance is evaluated through a combination of closed-form analysis and Monte Carlo scheduling experiments, with comparisons against conventional dynamic grant-based scheduling, semi-persistent scheduling/configured grant operation, and fixed proactive repetition. The evaluation shows that Det-5G improves predictability of cycle completion, maintains the target reliability under changing link conditions, and scales more effectively to multi-device control than conventional reactive scheduling, while adapting radio resource use instead of continuously provisioning for the worst case as in fixed repetition. These characteristics make cycle-oriented scheduling a pragmatic solution for reducing the determinism gap that limits the use of 5G for closed-loop control in different verticals, especially as it evolves through 5G-Advanced toward 6G.

0.32

Making Time-Sensitive Networking Deployable: A Comprehensive Lifecycle Architecture

cs.NI ·2026-08-20 ·Rubi Debnath, Paul Pop, Silviu S. Craciunas, Marc Boyer, Sebastian Steinhorst
publishedsurvey similarity 0.59
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Embedded Software (EMSOFT), October 2026

Time-Sensitive Networking (TSN) provides deterministic guarantees and bounded latency for safety-critical applications across different domains. While the IEEE 802.1 TSN standards provide a comprehensive set of mechanisms for time synchronization, shaping, scheduling, resource reservation, and reliability, deploying TSN in real-world applications remains a complex, multi-step engineering task. Existing research primarily focuses on optimizing individual objectives, such as increasing schedulability, reducing latency, accelerating solution generation, or improving performance analysis. However, whether these extensively researched solutions can be deployed in real-world systems remains unanswered, as the assumptions made in these methodologies often differ from practical hardware constraints. Therefore, a broader, holistic view of end-to-end TSN deployment and management remains an open research question. Currently, there is a lack of a unified perspective, consensus, and coordinated research efforts focusing on a comprehensive end-to-end TSN deployment workflow. We present a comprehensive overview of the TSN deployment lifecycle, current challenges, limitations of existing tools, and future research directions for TSN deployment and management. Lastly, we identify key research gaps from a deployment perspective and provide guidance for the development of next-generation deployable TSN networks.

0.25

RAPID: Proactive Rate Control for Enabling High Data Rate and Low Latency in 5G Edge Networks

cs.NI ·2026-10-09 ·Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos
top venuehighly cited similarity 0.58
Abstract

Many 6G use cases such as tactile Internet and eXtended reality applications would simultaneously require a high data rate and low latency wireless connectivity.It is increasingly being realized that the current transport protocols relying on packet loss and delay are insufficient to satisfy the data rate and latency requirements of such applications. To address this problem, we propose RAPID, a transport layer solution designed for private 5G edge networks, where the bottleneck is located at the base station. We show that by regulating the send rate to maintain a target physical resource block utilization, we can achieve high data rate, low latency communication. We design a simple yet effective policy that adapts to the dynamic nature of wireless channel conditions. In a multi-UE scenario with two RAPID flows and one TCP Cubic flow, our testbed results show that RAPID flows achieve significant improvements in one-way delay, i.e., 72x and 55x lower compared to TCP Cubic, with negligible packet loss at the cost of modest goodput reductions of 16% and 27%, respectively.

0.73

Decentralized Latency Models and Information Flow for TSN Shapers - A Tutorial

cs.NI ·2026-10-08 ·Alexej Grigorjew, Stefan Geissler, Jürgen Schmitt, Tobias Hossfeld
similarity 0.58
Abstract · This work has been submitted to IEEE COMST for possible publication. Copyright may be transferred without notice, after which this version m…

Recent advancements in the fields of industrial automation and in-vehicle communication have also increased the requirements on their underlying networks. Traditional field bus technologies are being replaced by regular Ethernet devices with features from the IEEE Time-Sensitive Networking working group. Their standards are designed to achieve zero congestion loss and deterministic latency bounds, but the specific guarantees can differ depending on the shapers used and how the bounds are calculated. After several contributions to the standardization efforts, this work presents a number of decentralized latency models that can be applied locally on the switches, without requiring global knowledge from the rest of the network. It includes a formal definition of delay segments that allows to incorporate interoperability between different shapers and latency models in the future. It presents pseudo-code suggestions for the latency bounds computation of Strict Priority, Credit-Based Shaping, Asynchronous Traffic Shaping, and Cyclic Queuing and Forwarding, all of which can be applied locally on the devices. Finally, five models were implemented and evaluated with respect to their efficiency in terms of latency, jitter, and number of accepted streams. The results illustrate how different shapers are suited for different networks and traffic distributions.

0.32

Toward Lightweight Aerial 5G gNBs: Reproducible OAI Testbed on Commodity ARM Platforms

cs.CR eess.SP ·2026-10-04 ·Marc Duboc, Ammar El Falou
similarity 0.57
Abstract

For a battery-powered UAV base station, every gram and watt devoted to RAN-compute competes with flight-duration margin. We therefore keep the 5G Core (5GC) and central unit (CU) on the ground and design the airborne unit around only the backhaul endpoint, distributed unit (DU), and radio. The key question is then a practical one: can widely available commodity ARM computers sustain a real radio OpenAirInterface (OAI) 5G DU with useful performance over heterogeneous F1? We answer it with Raspberry Pi~5 and Jetson Orin Nano as DUs, a USRP B210, a commercial handset, and Ethernet, Wi-Fi/GRE, and 5G/WireGuard backhaul. Jetson preserves 88.4% of x86 split-DU Ethernet DL throughput and 87.5-89.0% across all three bearers; 5G/WireGuard preserves 76.4-77.1% of each host's wired DL rate. The validated Jetson/B210/RM500Q-GL electronics weigh 657.4 g and draw about 28 W under sustained traffic (757.4 g with integration allowance). A controlled link adaptation intervention raises split DL from 23.4 to 99.4 Mb/s as the dominant Modulation and Coding Scheme (MCS) moves from 3 to 26. Finally, synchronized radio, F1-U, CPU, and UHD evidence narrows the remaining monolithic-split gap to split-path scheduling/timing behavior. Beyond performance, this capability serves the emergency-response use case that motivates the aerial cell: once deployed above an affected area, it can broadcast a PWS warning message. We release the OAI patch that carries the single-segment Write-Replace Warning over F1 from CU to DU, where SIB8 is scheduled to the handset. The public artifact makes the payload, performance, and emergency-broadcast baseline reproducible with laboratory-accessible hardware.

0.14

One-Way Delay Model for 5G Low Latency, High Data Rate Communications

cs.NI ·2026-10-09 ·Hamid Hassani, Sonia M. Heemstra de Groot, Ignas G. Niemegeers, Kishor C. Joshi, George Exarchakos
publishedhighly cited similarity 0.57
Abstract

Achieving low delay and high data rate communication in 5G requires preventing persistent queue backlogs at path bottlenecks. A key indicator of queue buildup is an increase in one-way delay (OWD) of packets. However, accurately measuring OWD is challenging due to synchronization issues between the sender and receiver. Moreover, using OWD to infer the onset of queueing can be inefficient. For instance, congestion control mechanisms that rely on latency as a congestion signal may result in cellular network underutilization, see, e.g., [1]. Thus, to develop more efficient rate control approaches, it is crucial not only to estimate OWD accurately but also to perform a more fine-grained analysis that provides detailed insights into the queue status. This paper presents a framework for modeling OWD in 5G edge networks, where the wireless link is typically the path bottleneck. %, by modeling it through measurable delay components. We demonstrate that OWD is dominated by queueing delay (QD), particularly at high data rates. We analyze QD by decomposing it into two main components: aggregation delay and channel access time. Aggregation delay can be accurately measured at the user equipment (UE), and channel access time can be estimated based on network conditions. Our key contribution shows that QD, while challenging to measure directly at the base station (BS), can be closely approximated by combining these components. We validate this model through NS3 simulations under varying network loads and single- and multi-UE scenarios. This framework provides a foundation for developing advanced mechanisms for congestion control and bottleneck detection in 5G networks.

0.67

Implementation of Hybrid QoS-Aware Data Radio Bearer in 5G Networks

cs.ET ·2026-10-02 ·Padmapriya Patil, Abhishek Bhattacharyya, Gudepu Venkateswarlu, Andrea Fumagalli, Koteswararao Kondepu
code/data similarity 0.57
Abstract

In Fifth-Generation (5G) wireless networks, Quality of Service (QoS) flow management supports diverse applications with heterogeneous QoS requirements, including latency-sensitive and high-throughput services. 5G architectures adopt a flow based QoS framework, where QoS flows are mapped to Data Radio Bearers (DRBs) to achieve the desired radio resource allocation. Existing mapping strategies typically rely on static one-to-one QoS-to-DRB mappings per PDU session, leading to inefficient spectrum utilization or inadequate support for delay sensitive traffic. This work presents a hybrid QoS-aware DRB mapping mechanism based on standardized 5G QoS Identifier (5QI) characteristics. The proposed framework incorporates multiple QoS flows within a single PDU session, supporting both many-to-one and one-to-one mapping strategies. The hybrid framework improves radio resource utilization and reduced bearer overhead by enabling flexible DRB utilization, where compatible non critical flows share DRBs while delay-critical flows are assigned dedicated DRBs to ensure strict QoS guarantees. The proposed hybrid QoS-aware DRB mapping is implemented using the open-source OpenAirInterface (OAI) mobile stack platform to demonstrate the integration of the proposed features within the existing 5G framework.

0.35