CS Paper Radar

Safety-Constrained Model Predictive Control for an Omnidirectional Walking Assistive Robot Using Control Barrier Function

Andrea Fortuna, Marta Lorenzini, Elisa Motta, Alberto Ranavolo, Elena De Momi, Arash Ajoudani

cs.RO ·submitted 2026-09-22 10:51 UTC · v1

Abstract

Providing safe and effective mobility assistance plays a crucial role in restoring independence and enhancing the quality of life for individuals with motor impairments. In this context, robotic walking assistive devices have recently emerged as promising solutions to provide physically compliant interaction while ensuring user safety and support. This paper presents a novel control framework for an omnidirectional Walking Assistive Robot (I-WANDER) that integrates a Control Barrier Function (CBF) formulation into a Model Predictive Control (MPC) scheme to explicitly enforce collision-avoidance safety constraints while optimizing for energy efficiency and smooth human-robot collaboration. The method was experimentally evaluated with 12 healthy participants performing two different walking tasks using both the proposed CBF-based MPC controller (CB-MPC) and a variable admittance controller (AC). The first task involved structured navigation through a U-shaped corridor, whereas the second consisted of a single-obstacle avoidance task performed blindfolded to ensure the obstacle was unexpected. Comparative results show that the CB-MPC architecture significantly reduces energy consumption and mechanical work (p < 0.01) without compromising motion smoothness, while also decreasing the number of obstacle collisions. Overall, the findings highlight the potential of the proposed control architecture to enhance both safety and efficiency in robotic walking assistance.

Closest papers

Nearest neighbours by meaning across the whole index.

Geometry-Aware Predictive Control for Walk-to-Run Bipedal Obstacle Crossing

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.73
Abstract

This paper presents a geometry-aware predictive control framework for bipedal obstacle crossing across walking and running regimes. The proposed approach integrates a phase-structured trajectory generator with a constrained model predictive control (MPC) tracking layer to generate coordinated pelvis and swing-foot motions during obstacle traversal. The crossing process is represented through five interpretable phases: pre-crossing, leading-leg clearance, straddle, trailing-leg clearance, and recovery. Within this structure, swing-foot elevation is adapted as a function of obstacle height, while lateral stance widening and pelvis repositioning are introduced as functions of obstacle depth to improve transverse clearance and body alignment. A continuous gait-parameter evolution enables smooth walk-to-run transition without discrete controller switching. The generated references are tracked using MPC to regulate motion smoothness, clearance feasibility, touchdown behavior, and lateral admissibility. The framework is evaluated in reduced-order simulation over five progressively difficult obstacles under walking and running conditions. The robot successfully crosses the first four obstacles, achieving minimum body-obstacle clearances of 0.036, 0.036, 0.059, and 0.017 m, respectively. The fifth and most demanding obstacle leads to collision, identifying the current operating boundary of the proposed reduced-order formulation. Overall, the method provides a compact, interpretable, and computationally efficient basis for intelligent obstacle-aware bipedal locomotion.

0.24

Towards Adaptive Interaction Strategies for Human Companion Robot via Deep Reinforcement Learning

cs.RO eess.SY ·2026-08-20 ·Cong-Thanh Vu, Yen-Chen Liu
published similarity 0.66
Abstract · Accepted by IEEE Transactions on Systems, Man, and Cybernetics: Systems

In the field of Human-Robot Interaction (HRI), achieving flexibility in human-accompanying within real-world environments holds great potential for various applications but also poses significant challenges. Traditional methods typically restrict robots to fixed positions relative to humans, such as tracking from behind, in front, or side-by-side, which limits robot adaptability in dynamic workspaces. This study introduces a novel human-companioning strategy that uses Reinforcement Learning (DRL) to enable mobile robots to dynamically adjust their tracking positions according to varying conditions. An interaction space is defined to capture the relationship between the human and the robot while considering the environment, which serves as the basis for state spaces in DRL to assist the robot in adapting to environmental changes. A human-robot companion controller is developed by integrating Model Predictive Path Integral (MPPI) control with Control Barrier Functions (CBF), ensuring that the robot accurately follows the target's movement in both position and orientation while avoiding obstacles and enhancing social acceptance and safety. The proposed approach is evaluated in real-world scenarios, both indoors and outdoors, and compared with other studies. The results show that the proposed method improves the success rate and tracking accuracy by at least 24% and 47%, respectively, while enhancing human comfort. Experiments demonstrate the robot's ability to flexibly accompany a person walking at speeds of up to 1.7 m/s, dynamically adjusting its strategy without being confined to a fixed position. Additionally, the robot respects the human's intimate space to ensure safety, comfort, and effective obstacle avoidance.

0.40

Capturability-Aware Footstep Planning in Cluttered Environments: A Recursively Feasible Sequential MPC on Axis-Aligned Safe Corridors

cs.RO ·2026-11-06 ·Athanasios Kyriakopoulos, Shubham S. Kumbhar, Kunal S. Narkhede, Abhijeet M. Kulkarni, Ioannis Poulakakis
published similarity 0.66
Abstract · Accepted for publication in 2026 IEEE-RAS 25th International Conference on Humanoid Robots (Humanoids)

A fundamental aspect of humanoid footstep planning is to jointly guarantee obstacle avoidance and locomotion stability. This paper presents a capturability-aware sequential Model Predictive Control (MPC) framework for Linear Inverted Pendulum (LIP)-based humanoid footstep planning in the presence of obstacles. The proposed method combines obstacle avoidance with capturability constraints through safe corridors constructed as sequences of intersecting rectangles, yielding a sequential MPC framework with recursive feasibility guarantees for the LIP-based planning layer. The planner autonomously adapts to constrained scenarios, switching to in-place walking when obstructions---such as doors assumed to be open during planning but unexpectedly found to be closed during execution---block forward motion. Performance is largely independent of the prediction horizon, allowing high success rates while keeping the computational cost low. The approach is validated in high-fidelity simulations with the humanoid robot Digit, demonstrating a practical solution for capturable humanoid footstep planning in cluttered environments.

0.16

Language-Guided Terrain-Adaptive Neural MPC for Autonomous Traversal of Articulated Tracked Robots

cs.RO cs.AI ·2026-09-11 ·Zhenfeng Gan, Yanbo Chen, Lirong Che, Yongyi Ma, Rongkai Zhu +1 more
similarity 0.61
Abstract

In urban search and rescue, articulated tracked robots (ATRs) must traverse structured but contact-rich environments such as stairwells and cluttered building interiors. Reliable autonomy remains challenging because robot-terrain interaction (RTI) is hybrid and discontinuous, and effective flipper-track coordination is difficult to model analytically. We present ASTRIL-MPC, a language-guided neural kinematics model predictive control (MPC) framework for autonomous traversal. A learned kinematics model predicts short-horizon task-state increments from a height sequence and recent trajectories; NMPC plans with multi-objective costs and strict feasibility constraints; and a large language model (LLM) proposes bounded updates to selected weights and bounds through a safety-checked interface with range clipping, rate limiting, and consistency checks. The compiled predictor enables a full control cycle within 100 ms. Across three traversal tasks and a multi-height generalization setting, ASTRIL-MPC improves an aggregate traversal-quality score by up to 71% over a non-adaptive NMPC and by 67% over a PPO baseline, while eliminating measurable collision impacts during descent. These results indicate that combining terrain-conditioned neural kinematics, optimization-based planning, and language-guided adaptation yields data-efficient and robust autonomy for articulated tracked robots. Real-robot trials over four indoor obstacles further demonstrate transfer to contact-rich physical traversal.

0.22

Reachability-Guided Sequential Quadratic Programming-Guarded Model Predictive Path Integral for Safe Nonlinear Predictive Control

cs.RO eess.SY ·2026-10-03 ·Alexandre Didier, Jason J. Choi, Namhoon Cho, Claire J. Tomlin, Melanie N. Zeilinger
similarity 0.61
Abstract

Safe robot control often requires combining long-horizon performance optimization with hard state and input constraints, but existing approaches tend to address this tradeoff partially. Sampling-based model predictive control (MPC) methods such as model predictive path integral (MPPI) are effective in handling nonlinear and nonconvex environments, yet their finite-sample rollouts and unconstrained weighted-average update can return an unsafe control. Deterministic nonlinear MPC can explicitly incorporate constraints, but its real-time safety and performance depends strongly on warm starts and local convergence. Hamilton--Jacobi reachability (HJR) provides rigorous safety certificates, but offline value-function computation remains practical only for reduced-order models. We propose ReSQ-MPPI, a reachability-informed generation--refinement architecture that combines these complementary strengths. An HJR value function computed offline for a reduced-order model guides online MPPI sampling toward safe, promising trajectory candidates. The MPPI solution is then refined by a small number of sequential quadratic programming (SQP) iterations in a full-order MPC problem. A key observation is that the standard MPPI inference step is an unconstrained weighted least-squares problem; ReSQ-MPPI replaces it with a constrained MPC refinement that recovers the MPPI update when it is feasible and minimally modifies it otherwise. Simulations in cluttered navigation and autonomous racing environments demonstrate that ReSQ-MPPI improves safety and performance over standalone MPPI, MPC, and reachability-filtered sampling-based control baselines.

0.18

Multimodal Trajectory Planning for Surface Vehicles using Turning Circle-based Control Barrier Functions

cs.RO ·2026-08-20 ·Changyu Lee
similarity 0.61
Abstract · This work has been submitted to an Elsevier journal for possible publication

This paper presents a guide path-free multimodal trajectory planning framework for autonomous surface vehicles operating in dynamic environments. The proposed method integrates model predictive control (MPC) with a turning circle-based control barrier function (TC-CBF). Unlike conventional Euclidean distance-based CBFs (ED-CBFs), which evaluate safety solely based on proximity, the TC-CBF accounts for the nonholonomic motion and finite turning capability of a surface vehicle. Its geometric formulation identifies feasible avoidance regions according to the vehicle's turning circles and generates distinct left- and right-turning avoidance modes. These modes allow the optimization solver to explore and select topologically different trajectories without relying on globally planned guide paths, as required by many conventional multimodal planning approaches. By embedding the avoidance direction directly into the safety constraint, the proposed framework alleviates the local-minimum and deadlock problems of single-mode MPC while maintaining computational efficiency. Extensive simulations involving multiple moving vessels demonstrate that the proposed method achieves higher success rates, fewer safety violations, and smaller residual violations than single-mode baselines across all tested traffic densities.

0.36

OcclusionCBF: Backup Control Barrier Functions for Safe Navigation Among Hidden Dynamic Obstacles

cs.RO eess.SY ·2026-09-06 ·Taekyung Kim, Hun Kuk Park, Renya Wada, Nikolay Atanasov, Shumon Koga +1 more
code/data similarity 0.60
Abstract · The first two authors contributed equally to this work. Project page: https://www.taekyung.me/occlusion-cbf

Robots navigating under occlusion may enter states from which no admissible input can avoid a dynamic obstacle once it becomes visible. We present OcclusionCBF, a safety filter that extends backup control barrier functions to reachable-occupancy predictions for potentially hidden dynamic obstacles in occluded regions. The method certifies a prescribed backup rollout against collision-inflated occupancy and a verified terminal set, yielding affine constraints for minimally invasive quadratic-program filtering. We establish recursive feasibility of the resulting safety filter, and collision avoidance for every hidden-obstacle motion covered by the occupancy prediction. Randomized benchmarks, MetaUrban simulations, and hardware experiments demonstrate improved task success over reactive and occlusion-aware predictive baselines with millisecond-scale computation.

0.39

Safe-Ballbot: Tilt-Consistent MPC with Control Barrier Functions for Ballbot Navigation

cs.RO eess.SY ·2026-11-02 ·Duc Cuong Vu, Tung Lam Nguyen
code/data similarity 0.60
Abstract · Under-review

Ball-balancing robots (ballbots) must lean to accelerate, and the lean is limited by the wheel torques and by safety. Planners that use the full robot model are expensive, while planners that ignore the balance dynamics produce references that cannot be followed. This paper presents a two-layer navigation scheme for a three-omni-wheel ballbot. The upper layer is a model predictive controller on a \emph{jerk model} of the ball position, with discrete-time control barrier functions for static, moving, rotating and concave obstacles. The lower layer is a hierarchical sliding mode controller with an extended state observer and a robust exponential control barrier function on the tilt (HSMC-ESO-ECBF). The layers are linked by an acceleration bound derived in closed form from the largest steady tilt that the barrier function admits, so that the plan never asks for a lean the tracker refuses. For obstacles whose motion is only predicted, the obstacles are inflated by conformal prediction radii that bound the prediction error with a prescribed probability. In MuJoCo, with omni-wheel roller contacts and torque saturation, the scheme keeps at least $10$\,cm of clearance, tracks the plan within $2$\,cm RMS, keeps the tilt below the limit and plans in $9$--$12$\,ms, $10$--$15$ times faster than a full-model nonlinear MPC that enters the inflated obstacles; with predicted obstacles, the conformal inflation removes the collisions of a constant-velocity predictor in $30$ random crossing scenarios and reduces them in an endless run on a closed path.The source code and video illustrations are available at https://safe-ballbot.github.io

0.29