CS Paper Radar

Safe-Ballbot: Tilt-Consistent MPC with Control Barrier Functions for Ballbot Navigation

Duc Cuong Vu, Tung Lam Nguyen

cs.RO eess.SY ·submitted 2026-11-02 15:38 UTC · v1
code/data

Abstract

Ball-balancing robots (ballbots) must lean to accelerate, and the lean is limited by the wheel torques and by safety. Planners that use the full robot model are expensive, while planners that ignore the balance dynamics produce references that cannot be followed. This paper presents a two-layer navigation scheme for a three-omni-wheel ballbot. The upper layer is a model predictive controller on a \emph{jerk model} of the ball position, with discrete-time control barrier functions for static, moving, rotating and concave obstacles. The lower layer is a hierarchical sliding mode controller with an extended state observer and a robust exponential control barrier function on the tilt (HSMC-ESO-ECBF). The layers are linked by an acceleration bound derived in closed form from the largest steady tilt that the barrier function admits, so that the plan never asks for a lean the tracker refuses. For obstacles whose motion is only predicted, the obstacles are inflated by conformal prediction radii that bound the prediction error with a prescribed probability. In MuJoCo, with omni-wheel roller contacts and torque saturation, the scheme keeps at least $10$\,cm of clearance, tracks the plan within $2$\,cm RMS, keeps the tilt below the limit and plans in $9$--$12$\,ms, $10$--$15$ times faster than a full-model nonlinear MPC that enters the inflated obstacles; with predicted obstacles, the conformal inflation removes the collisions of a constant-velocity predictor in $30$ random crossing scenarios and reduces them in an endless run on a closed path.The source code and video illustrations are available at https://safe-ballbot.github.io

Comment
Under-review

Closest papers

Nearest neighbours by meaning across the whole index.

AC-SMPC: Differentiable Actor--Critic MPC with State Constraints for Safe and Fast Robot Navigation

cs.RO ·2026-10-30 ·Chaoran Wu, Jiayu Fan, Qichen Tan, Yuyi Liu, Jin Wang
similarity 0.61
Abstract

Achieving safe navigation in confined dynamic environments remains a challenging problem, as robots must balance navigation efficiency with safety. Existing actor--critic MPC architectures typically employ differentiable MPC layers, but this way cannot readily accommodate explicit state constraints, making it intractable to involve collision avoidance within learning-based planning. To address this issue, we propose an actor--critic model predictive control framework with state constraints. We first use vertices to represent the robot and obstacles, and half-spaces to represent the workspace. Based on these, the nonlinear robot dynamics is locally linearized and the hyperplane-based collision avoidance constraints are convexified into the differentiable MPC layer, and then the actor exploits closed-loop feedback to adjust the MPC objective parameters that shape local motion behavior, while the critic evaluates long-term task performance. We further relax the convexified constraints with bounded and penalized slack variables to form an elastic quadratic program, accommodating cases where the local constraint approximations cannot be satisfied simultaneously. Simulation tests and experiments, involving dynamic collision avoidance for multi-robot in narrow cases, illustrate the advantages of the proposed framework in adaptively adjusting the learned policy and improving navigation efficiency over existing approaches while maintaining the motion safety.

0.24

Safety-Constrained Model Predictive Control for an Omnidirectional Walking Assistive Robot Using Control Barrier Function

cs.RO ·2026-09-22 ·Andrea Fortuna, Marta Lorenzini, Elisa Motta, Alberto Ranavolo, Elena De Momi +1 more
similarity 0.60
Abstract

Providing safe and effective mobility assistance plays a crucial role in restoring independence and enhancing the quality of life for individuals with motor impairments. In this context, robotic walking assistive devices have recently emerged as promising solutions to provide physically compliant interaction while ensuring user safety and support. This paper presents a novel control framework for an omnidirectional Walking Assistive Robot (I-WANDER) that integrates a Control Barrier Function (CBF) formulation into a Model Predictive Control (MPC) scheme to explicitly enforce collision-avoidance safety constraints while optimizing for energy efficiency and smooth human-robot collaboration. The method was experimentally evaluated with 12 healthy participants performing two different walking tasks using both the proposed CBF-based MPC controller (CB-MPC) and a variable admittance controller (AC). The first task involved structured navigation through a U-shaped corridor, whereas the second consisted of a single-obstacle avoidance task performed blindfolded to ensure the obstacle was unexpected. Comparative results show that the CB-MPC architecture significantly reduces energy consumption and mechanical work (p < 0.01) without compromising motion smoothness, while also decreasing the number of obstacle collisions. Overall, the findings highlight the potential of the proposed control architecture to enhance both safety and efficiency in robotic walking assistance.

0.14

Model Predictive Control of Tensegrity Robots via Contact-Aware Graph Neural Dynamics Model

cs.RO ·2026-09-08 ·Nelson Chen, Patrick Meng, Charles Tang, Angelina Degay, Zachary Brei +3 more
hot direction similarity 0.60
Abstract

Tensegrity robots offer lightweight, compliant mobility over challenging terrain but remain difficult to model and control due to complex contact-rich dynamics and partial observability. This work presents a model predictive path integral (MPPI) controller for a three-bar tensegrity robot driven by a learned graph neural network (GNN) dynamics model. This work first extends prior GNN-based models with a differentiable contact detection module. The extension allows the dynamics model to reason over non-horizontal planar terrains, obstacles, as well as self-collisions. Then, the learned dynamics model and the MPPI controller operate in a closed data-collection loop, iteratively improving model accuracy and control performance. This work further introduces a hybrid MPPI strategy that combines MPPI with turning motion primitives to improve maneuverability. Experiments are performed in MuJoCo across five navigation tasks, which include, wall obstacles, inclines, narrow corridors, low-clearance structures, and a composite 3D obstacle course. The experiments demonstrate that the hybrid MPPI controller operating over the learned GNN dynamics model improves predictive accuracy over a flat-ground baseline model and achieves superior navigation performance compared to $A^*$-based re-planning and MPPI-only variants. Results show that the contact-aware learned dynamics combined with the sampling-based model predictive control enable robust tensegrity navigation in complex, contact-rich environments.

0.30

OASIS: Optimization-Aware Subgoal Inference with Safety Constraints for Autonomous Mobile Robot Navigation

cs.RO ·2026-11-09 ·Arian Hajizadeh, Javad Pourrafi Arabani, Negar Shenavar, Sana Bashiri, Seyed Majid Esmailzadeh
similarity 0.60
Abstract

Navigation in dynamic environments requires mobile robots to make progress toward their goals while respecting motion limits and avoiding surrounding obstacles. Learned subgoal policies can guide model predictive control beyond its local prediction horizon, but a geometrically suitable subgoal does not necessarily lead to a successfully solved control problem. This paper proposes OASIS, a hierarchical navigation framework that incorporates recent optimization outcomes into reinforcement learning-based subgoal generation. A high-level policy trained using Soft Actor--Critic generates local subgoals, while a nonlinear model predictive controller tracks them subject to motion limits, geometric collision-avoidance constraints, and embedded high-order control barrier function constraints. The outcomes of controller optimizations over each subgoal interval are summarized and provided to the policy at its next decision, without requiring additional optimization calls. The framework is evaluated in five navigation scenarios with static and moving obstacles, including dense interactions and sensing uncertainty. Comparisons with hierarchical and direct-goal control variants show that OASIS achieves the highest aggregate navigation success. Matched comparisons across three training seeds further show a consistent success advantage over the otherwise identical hierarchy without optimization-status input. The selected-policy comparison also shows fewer primary optimization failures with similar mean controller time.

0.15

Mobile Multi-Robot Navigation under Runtime Uncertainty via Koopman Operator Learning and Nonlinear Model Predictive Control

cs.RO ·2026-09-12 ·Xiaobin Zhang, Konstantinos Karydis
published similarity 0.59
Abstract · ISRR 2026 accepted paper

In this work, we developed a nonlinear model predictive control (NMPC) framework that employs learned dynamics via the Koopman Operator theory for mobile multi-robot navigation. We formulated and solved NMPC problems using a lifted bilinear Koopman-based model that accurately predicts affine input systems affected by perturbations and uncertainties. Two exemplary multi-robot navigation problems are considered: target reaching and formation control. The output of our method enables closed-loop multi-robot navigation and formation control in environments populated with obstacles, whereby the Koopman operator-based model used in the NMPC formulation addresses runtime uncertainties, namely, various degrees of random wheel slipping. We validated the effectiveness of our method for both problems via extensive numerical simulations in different environments with wheeled robots affected by different amounts of slip and without knowledge of their true dynamic models.

0.26

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

cs.RO ·2026-10-09 ·Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann
similarity 0.58
Abstract · 8 pages, 3 figures and 2 tables

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

0.34

RAIBO-Wagon: Real-Time Navigation System for a Legged Robot Towing a Wagon

cs.RO ·2026-10-29 ·Insung Yang, Eunchae Kim, Jungwoo Hur, Seunghun Jeon, Donghyuk Choi +1 more
code/data similarity 0.58
Abstract · 19 pages, 13 figures, 5 tables. Project page: https://insungyang.github.io/raibo-wagon/

Legged robots have demonstrated advanced capabilities across a wide range of real-world tasks, yet much of this progress concerns the robot controlling only itself. Once the robot is coupled to an external object -- particularly an underactuated one -- the dynamics of the combined assembly become more complex. Towing a wagon is a common practical scenario, where coupled dynamics make reliable navigation challenging. This difficulty is amplified in confined spaces, where collision-free navigation requires finding a narrow set of feasible paths under strict real-time constraints. To address this, we propose a navigation framework that combines Conditional Flow Matching (CFM) with Model Predictive Path Integral (MPPI) control over a learned Forward Dynamics Model (FDM). The CFM model mitigates the initialization problem of MPPI and accelerates its convergence, while MPPI with the FDM recovers feasible solutions beyond the CFM model's training distribution by iterative refinement. We integrate the framework into a full-stack navigation system for RAIBO-Wagon, a quadruped towing a custom wagon, and validate it in real-world outdoor experiments on 15 m-long courses through confined spaces, with all sensing and computation performed fully onboard. The system achieves an 85% success rate across 40 trials, towing a total load of up to 40 kg -- nearly 100% of RAIBO's body weight.

0.39

OcclusionCBF: Backup Control Barrier Functions for Safe Navigation Among Hidden Dynamic Obstacles

cs.RO eess.SY ·2026-09-06 ·Taekyung Kim, Hun Kuk Park, Renya Wada, Nikolay Atanasov, Shumon Koga +1 more
code/data similarity 0.58
Abstract · The first two authors contributed equally to this work. Project page: https://www.taekyung.me/occlusion-cbf

Robots navigating under occlusion may enter states from which no admissible input can avoid a dynamic obstacle once it becomes visible. We present OcclusionCBF, a safety filter that extends backup control barrier functions to reachable-occupancy predictions for potentially hidden dynamic obstacles in occluded regions. The method certifies a prescribed backup rollout against collision-inflated occupancy and a verified terminal set, yielding affine constraints for minimally invasive quadratic-program filtering. We establish recursive feasibility of the resulting safety filter, and collision avoidance for every hidden-obstacle motion covered by the occupancy prediction. Randomized benchmarks, MetaUrban simulations, and hardware experiments demonstrate improved task success over reactive and occlusion-aware predictive baselines with millisecond-scale computation.

0.39