CS Paper Radar

Learning to Link: Automatic Re-identification of BLE Devices Under MAC Address Randomisation

Reem Abdulrhman Alghamdi, Alberto Verna, Marco Mellia

cs.CR ·submitted 2026-09-17 15:27 UTC · v2

Abstract

Bluetooth Low Energy (BLE) employs MAC address randomisation -- via Resolvable Private Address (RPA) -- to mitigate long-term device tracking on public advertising channels. Existing research has shown that advertising packets contain metadata and structural features that allow re-identifying a target device via manually crafted rules. In this work, we investigate the feasibility of automating the process of tracking BLE devices despite MAC randomisation by leveraging machine learning algorithms for the signature creation. Based on the actual Bluetooth traffic from target devices, we characterise the persistence of advertising-layer features across RPA changes and formulate device linkage as a supervised classification problem. Using simple decision tree classifiers as a proof-of-feasibility approach, we evaluate the distinguishability of target and non-target devices under varying address rotation patterns. Our results reinforce prior work demonstrating that advertising-layer metadata can enable device re-identification under MAC randomisation, to the point where such linkage can be automated using standard supervised learning techniques, without any specific knowledge of the technology.

Comment
Accepted at WTMC 2026
DOI
10.1145/3846375.3849104

Closest papers

Nearest neighbours by meaning across the whole index.

Maintaining IoT Device Identification under Concept Drift via Budget-Aware Traffic Labeling

cs.NI cs.CRcs.LG ·2026-08-16 ·Shayan Azizi, Norihiro Okui, Masataka Nakahara, Ayumu Kubota, Gustavo Batista +1 more
similarity 0.61
Abstract

Identification of IoT device types from passive traffic is increasingly used for security management in enterprise and ISP networks. However, the performance of machine learning-based classifiers gradually degrades under concept drift as device behavior evolves. Therefore, maintaining classification performance requires periodic retraining with newly labeled deployment traffic. The operational challenge is determining how much and which deployment traffic instances to label for maintaining classification performance. We show that these two decisions should be treated separately. While retraining solely on instances selected by a drift detector is prone to systematically overlooking parts of the emerging behavioral space, uniformly sampled deployment traffic captures more representative behavioral changes. Instead, drift detection is more effective at determining the amount of deployment traffic that should be labeled. We make three contributions. (1) We conduct a two-year longitudinal study of IoT traffic and characterize how behavioral evolution manifests across device classes and how retraining with newly labeled traffic restores classification performance. (2) We develop a conformity-based drift detector that captures class-conditional behavioral models directly from raw traffic features and provides feature-level explanations of behavioral evolution. (3) We demonstrate that adjusting the traffic labeling rate according to the observed behavioral evolution, combined with uniform traffic sampling, maintains classifier performance more effectively than detector-guided sample selection and is beneficial to managing the traffic labeling effort. We further show that this strategy performs comparably to confidence-guided adaptation while providing feature-level explanations. Our evaluation uses 3.8 million IPFIX flow records collected from 21 IoT types over more than 2 years.

0.04

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.58
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

PriCoRec: A Privacy-Aware Cloud-Device Collaborative Framework for Ad Recommendation under Feature Constraints

cs.IR ·2026-08-14 ·Dairui Liu, Zhongyi Lu, Jitao Lu, Aghiles Salah, Mete Sertkan +5 more
top venue similarity 0.55
Abstract · 5 pages, 1 figure. Accepted to RecSys'26

Privacy regulations increasingly restrict cloud processing of sensitive user data (e.g., age, gender), hindering traditional cloud-only recommendation models. To mitigate this challenge, we propose a Privacy-aware Collaborative cloud-device ads Recommendation framework (PriCoRec) which personalizes recommendations while keeping sensitive features on-device. While separating recommendation into cloud-based and on-device stages enables privacy-aware deployment, naive splitting suffers from degraded shortlist quality and inefficient on-device inference due to limited private features. We therefore design a collaborative framework that comprises a cloud-based pre-ranking stage using cloud-accessible features, and an on-device ranking stage that locally incorporates highly personalized features. We introduce a diversity regularizer to pre-ranking to improve candidate quality. Moreover, to control device power consumption and computational cost, we incorporate a cloud-guided training mechanism that enhances device model performance while keeping the model lightweight. Experiments demonstrate that the proposed framework maintains strong recommendation performance while keeping sensitive features on-device.

0.32

FedSwitch: Federated Region Classification From Wireless Channel Measurements

eess.SP ·2026-10-02 ·Mattia Piana, Stefano Rini, Stefano Tomasin
similarity 0.53
Abstract

Wireless Internet-of-Things (IoT) networks can leverage locally observed channel state information (CSI) at base-stations (BSs) to perform region classification, i.e., infer the region of origin of a transmitter (TX), thereby enabling channel-based authentication. However, centralizing these measurements incurs substantial communication overhead and requires sharing location-dependent radio fingerprints. To address these difficulties, we propose an edge-native federated learning (FL) framework where BSs collaboratively train a shared classifier via a parameter server (PS) without exposing raw data, thereby supporting physical-layer security tasks like spoofing detection. To overcome the statistical heterogeneity arising from diverse BS locations and propagation conditions, we introduce FedSwitch, a personalized FL algorithm that automatically transitions edge nodes from collaborative training to local fine-tuning upon loss stagnation. We provide theoretical convergence guarantees for the proposed collaborative training phase and derive analytical bounds linking classification errors to statistical discrepancies. Extensive evaluations on synthetic channel measurements demonstrate that FedSwitch significantly improves region-classification accuracy over standard FL baselines.

0.17

On-device Detection of Wearer-induced NLOS on Chest-worn UWB Tags: Machine Learning, Link Indicators, or Both?

cs.LG ·2026-10-30 ·Markus Gallacher, Vu Anh Minh Le, Matteo Trobinger, Davide Vecchia, Carlo Alberto Boano +1 more
similarity 0.53
Abstract · Submitted to ACM Transactions on Sensor Networks

Ultra-wideband (UWB) enables high-accuracy distance estimation (ranging), but performance degrades in non-line-of-sight (NLOS) conditions. When UWB tags are worn, the human body inevitably causes a wearer-induced NLOS (WNLOS), yielding significant errors; still, despite its relevance, WNLOS remains understudied. Moreover, WNLOS detection typically must occur on-device at the tag, requiring classification accuracy to be balanced against tight runtime and energy constraints often hard to meet with machine learning (ML) -- the dominating NLOS classification approach. Meanwhile, UWB radio link indicators (LI) offer a faster and lightweight alternative that has rarely been explored. We study existing on-device ML and LI classifiers when applied to WNLOS, and propose novel hybrid ones exploiting their complementarity. We focus on chest-worn tags and analyze 21 classifiers on a dataset of 1.5 million samples across channels, PHY settings, environments, subjects, and orientations. Results show that while all of them achieve good classification accuracy, relative performance, including ranging errors due to misclassification, depends heavily on channel and PHY configuration. Runtime and energy efficiency also vary dramatically; some techniques offer marginal accuracy gains while consuming up to 39.6x more energy. Therefore, we also introduce a recommender tool to identify optimal classifiers under user-defined constraints, publicly released with our dataset.

0.26

CrossLink: Breaking Location Privacy by Linking Device Identifiers Across Protocols

cs.CR ·2026-09-09 ·Aneet Kumar Dutta, Mihirraj Dixit, Kevin Gni, Wouter Lueks, Mridula Singh
top venue similarity 0.53
Abstract

Smartphones simultaneously transmit temporary identifiers over LTE, WiFi, and BLE. Existing privacy defenses analyze identifier randomization per protocol, implicitly assuming that these protections compose across protocols. We show that they do not: Even when each protocol leaks only temporary identifiers and the adversary is fully passive, unsynchronized identifier rotations allow cross-protocol stitching of device traces. We present CrossLink, an uncertainty-aware tracing algorithm that links identifiers across time, space, and protocols under noisy localization and mobility. We evaluate CrossLink using controlled lab experiments with commodity devices and large-scale mobility simulation. Under large-scale mobility simulation, CrossLink reconstructs full traces for 83% of users, versus 22% for the best single-protocol baseline, showing that location privacy must be analyzed jointly across protocols. We further show that CrossLink remains effective under partial coverage: strategically placed sniffers near LTE handover regions, mobile sniffers, and limited high-coverage subregions retain sufficient cross-protocol evidence to bridge observation gaps, achieving substantially higher linkability than random deployments.

0.52

The Rise of Personal Trackers as the Next Infrastructure for Ubiquitous Positioning

cs.NI ·2026-10-16 ·Mohamed I. Hany, Hamada Rizk, Moustafa Youssef
published similarity 0.52
Abstract · 4 pages, 1 figure. Accepted at the 5th ACM SIGSPATIAL International Workshop on Spatial Big Data and AI for Industrial Applications (GeoIndu…

Reliable indoor positioning remains a central unsolved problem in spatial computing. Existing systems depend on fixed, provider-owned infrastructure (WiFi access points, Bluetooth beacons, UWB anchors) whose deployment, calibration, and ownership models limit their scalability. Meanwhile, personal trackers, wearables, smart luggage tags, and tagged industrial assets are becoming densely embedded in the very indoor environments where positioning infrastructure is weakest. This paper argues that these devices point to a new class of spatial infrastructure: non-stationary, user-owned, and semantically interpretable. We present TrackerNet, a vision for transforming personal trackers from private object-finders into a decentralized substrate for ubiquitous positioning. The key shift is to stop treating anchor mobility as noise: TrackerNet models mobile anchors as probabilistic references whose stability, trust, and semantic role are inferred over time, reframing indoor localization as non-stationary spatial graph inference. We identify three research frontiers (non-stationary SLAM over mobile, intermittently visible anchors; semantic reasoning that connects ranging signals to interpretations of anchor behavior; and consent-based, privacy-preserving governance for cross-vendor cooperation) and a staged pathway by which the vendors and venue operators who already run tracker networks can realize them with academia. We do not claim a finished system; we define a research agenda.

0.35

Mind Your Boundaries: Boundary-Aware Model Obfuscation against Cross-node Attack

cs.CR cs.AI ·2026-10-19 ·Yuyang Zhang, Yihui Jin, Kangjie Chen, Leyang Wu, Run Wang
similarity 0.52
Abstract

With the advancement of powerful AI chips, on-device machine learning is gaining traction for its low latency and privacy protection. However, when edge devices are compromised, attackers can obtain white-box access to the deployed models by reversing the apps directly to obtain the knowledge of peer devices, which is known as Cross-Node Attacks, like performing efficient adversarial attacks. Most existing defenses target known vulnerabilities, yet white-box access still enables attackers to uncover more unknown weaknesses. This creates a critical risk for edge-device deployments, where one compromised device can endanger all models distributed from the same source. Motivated by findings that the model robustness is primarily influenced by the curvature of the decision boundary, we investigate how model parameters shape its curvature. In this paper, we propose a novel method, BMO, that obfuscates model parameters to diversify the decision boundary further resisting cross-node attack while preserving its benign accuracy. Specifically, we explore decomposing model parameters into boundary-position and boundary-curvature components based on null-space constraints, then models with differentiated decision boundaries are instantiated by injecting noise into the boundary-curvature component. Across all four major types of adversarial attacks with four widely-deployed on-device models, BMO achieves an average success rate of 68.68% in defense, far exceeding the most competitive baseline, which attains only 22.32% in defending against cross-node attacks. Moreover, BMO achieves comparable performance in benign accuracy compared with baselines.

0.27