CS Paper Radar

High-Bandwidth Biomimetic Finger for Tactile-Transparent Remote Texture Sensing

Shuang Yang, Fuyuan Liu, Yitian Shao

cs.RO ·submitted 2026-08-13 06:57 UTC · v1

Abstract

High-fidelity tactile feedback is essential for robotic teleoperation, enabling precise manipulation and critical decision-making. While biomimetic fingertip sensors can capture surface-texture features, how their design shapes the tactile transparency of rendered feedback remains poorly understood. This paper presents a biomimetic fingertip replicating the human finger's multilayer mechanical gradient and fingerprint morphology, with an embedded high-sensitivity inertial measurement unit capturing texture-induced vibrations for remote vibrotactile rendering. Three variants are compared with the human fingertip through temporal and spectral analyses and a user study spanning three perceptual dimensions, establishing a transmission chain from fingertip design through signal characteristics to tactile transparency. The multilayer mechanical gradient yields the clearest improvements in signal intensity and texture-feature representation, whereas a stiffer skin layer amplifies vibration intensity at the expense of feature representation. The perceptual dimensions draw on distinct signal attributes: roughness on energy scaling, granularity on spectral shape, and repetitivity on characteristic-peak representation. These findings offer design principles for application-specific fingertips in robotic teleoperation.

Closest papers

Nearest neighbours by meaning across the whole index.

Remote Surfaces at Your Fingertips: Electrovibration-Based Tactile Feedback for Robot Teleoperation via Touchscreen Interfaces

cs.RO cs.HC ·2026-08-22 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.68
Abstract · 8 pages, 10 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Enabling operators to perceive and interact with remote environments naturally is a fundamental challenge in robotic teleoperation. This is especially critical in tasks involving physical interaction, where real-time haptic awareness improves operational safety and effectiveness. Existing kinesthetic haptic feedback methods suffer from instability during rigid surface contacts and remain sensitive to communication delays, while visual cue-based force feedback imposes additional cognitive load and limits sustained situational awareness. This work presents a teleoperation interface that conveys remote surface interactions to the operator through electrovibration-based tactile feedback, enabling naturally mapped force reflection while avoiding the stability issues associated with kinesthetic feedback and the latency limitations of mechanical actuators. A user study (N=21) evaluated interface usability, sense of presence, and operator workload under two force reflection conditions: visual feedback and electrovibration-based tactile feedback. Characterisation experiments further assessed path-following accuracy and response time across both conditions. Results show that tactile feedback significantly reduced response time by 15.35% (p=0.002, d=0.96) and increased the sense of presence by 31% (p<0.001, d=0.90) compared to visual feedback, while imposing comparable workload and usability across both conditions. These findings demonstrate that electrovibration-based tactile feedback is a viable and effective modality for robot teleoperation, improving operator responsiveness and sense of presence in contact-rich manipulation tasks, with direct applicability to safety-critical domains such as nuclear maintenance.

0.20

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.67
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.30

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.63
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.63
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

DeTac: Dual-branch Decoupling of Texture and Force Signals in Vision-Based Tactile Sensors

cs.RO ·2026-10-12 ·Zhirui Zhang, Yunkai Tang, Jiahang Li, Fan Fei, Jinnuo Zhang +4 more
published similarity 0.62
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026). 17 pages, 11 figures

Vision-based tactile sensors enable fine-grained perception for dexterous robotic manipulation, but current marker-based designs tightly couple surface texture and contact force signals within a single observation. Existing data-driven decoupling methods rely on serial mask-based inpainting, which suffers from mask-sizing dilemmas caused by physical indentation effects, error retention, and lack of real paired data for supervision. To address these challenges, we propose DeTac, a novel dual-branch generative framework that concurrently extracts clean shading and marker images from a single mixed tactile image. DeTac leverages full-image synthesis to naturally bypass mask dependency and introduces a cross-branch synergistic optimization that enables mutual supervision, effectively preventing error retention. Furthermore, we construct a strictly aligned, real-world paired tactile dataset using custom hardware to provide high-quality supervision. Extensive experiments demonstrate that DeTac achieves state-of-the-art decoupling accuracy, significantly facilitating downstream surface reconstruction and force estimation tasks while exhibiting cross-sensor generalization.

0.32

A wearable input/output interface learns personalized models of haptic perception

cs.RO ·2026-11-06 ·Wen Li, E. Magnus Adams, Zijie Xu, Jiawen Yao, Aybala Esmer +3 more
hot direction similarity 0.62
Abstract

Wearable haptic interfaces deliver physical stimuli to the skin, yet perceived locations vary widely across users and diverge from actuator locations, particularly for emergent tactile-feedback techniques. We developed a wearable haptic input/output (I/O) device integrating a 36-channel electrotactile array with capacitive touch sensing, enabling stimulation and user-reported percept locations to be registered within the same body-referenced coordinate frame. In 24 participants, the device revealed electrotactile and referred-thermal perceptual maps with notable interparticipant variability. Despite this variability, both modalities retained electrode-pair-specific spatial structure across participants. Tactile and thermal percepts also showed spatial correspondence, whose strength varied across participants. These findings motivated our human-in-the-loop calibration framework, which adapts a forward-prediction strategy to individual users and generates personalized perceptual models. These models enabled inverse rendering by selecting stimulation patterns predicted to generate a target percept for a specific user. Using these models, we demonstrate personalized haptic rendering in haptic-guided robot teleoperation, visual-to-haptic sensory substitution, interpersonal haptic communication, and virtual reality (VR). Together, this platform provides a route toward adaptive haptic interfaces that measure, model, and render according to each user's perception.

0.31

Evaluating Lightweight Contact Feedback in Dual-Operator Collaborative Humanoid Teleoperation

cs.RO cs.HC ·2026-10-16 ·Austin Graves, Chuizheng Kong, Yunho Cho, Yuanshao Yang, Advaith Nidumukkala +2 more
similarity 0.61
Abstract · 8 pages, 4 figures, 2 tables. Project website: https://xrt-teleop.github.io

Dual-operator humanoid teleoperation enables collaborative manipulation through two separate robots, but operators lack direct awareness of robot-object contact that is normally available during physical interaction. To address this, we present eXtended Reality Teleoperation (XRT), an extended reality teleoperation framework that returns a robot's fingertip contact through lightweight vibrotactile and/or auditory feedback, and a synchronized dual-humanoid testbed built on it for two operators. Sixteen dyads performed a collaborative crate lift-and-flip under vision only and the three feedback conditions in a counterbalanced within-subject design with verified feedback-channel delivery. Three results follow. First, operators rated our finger-localized vibrotactile display as more effective than our open-ear sonification: all 32 ranked it above the sonification, 18 ranked it most effective, and its cues were rated far easier to perceive and interpret than the auditory cues. Second, completion time, failures, workload, discomfort, and partner awareness showed no detected condition differences, with wide completion-time intervals and smaller meaningful effects unresolved. Third, performance changed substantially with practice, especially on the harder flip-over task: completion time improved across blocks, and attempt-to-attempt variation within a dyad (SD x1.51) was larger than the largest condition contrast (x1.16). Exploratory analyses detected no difference in immediate grip or motion responses between feedback conditions. For novice collaborative teleoperation, our fingertip vibrotactile cues were rated more effective and easier to interpret than our auditory cues, while their effect on task performance remains unresolved.

0.15

Sharing Roughness with Hand-Outline Visualization to Reduce Sensory Asymmetry in VR Collaboration

cs.HC ·2026-08-29 ·Minju Baeck, Yoonseok Shin, Hyunjin Lee, Boram Yoon, Sang Ho Yoon +1 more
published similarity 0.61
Abstract · 10 pages, 8 figures, 9 tables. Accepted for publication in TVCG Special Issue on the 2026 IEEE Symposium on Mixed and Augmented Reality (IEE…

In collaborative VR, asymmetric access to haptic hardware creates a critical information gap: tactile evidence remains private to the haptic user, hindering the shared understanding needed for joint decision-making. While prior work has explored crossmodal sensory cues in virtual environments, it remains unclear how such cues should be designed for asymmetric collaboration, where collaborators receive information through different modalities. In our setting, the haptic user feels roughness through fingertip vibration, whereas the non-haptic user relies on vision alone. To reduce this asymmetry, we propose externalizing an object's tactile state through a glanceable hand-outline visual proxy. Specifically, we examine whether abstract visual roughness cues based on line shape and motion can encode three discrete roughness levels for both haptic and non-haptic users. Two preliminary studies establish a shared visual semantics by identifying visually distinguishable cues for non-haptic users and validating their visuo-haptic correspondence for haptic users. In a main study of a collaborative sorting task, showing this visualization on both users' hands significantly reduced completion time relative to a no-visualization baseline. Moreover, NU-side cue visibility was associated with higher confidence and perceived contribution for the non-haptic user. These findings show that hand-anchored abstract visual cues provide a lightweight means of externalizing object tactile state, reducing information asymmetry without compromising social presence.

0.17