CS Paper Radar

RoboTwin-Phys: Do WAMs and VLAs Understand the Physical World?

Jiaqi Zhang, Feng Ye, Mingjia Yang, Zhihong Chen, Mingkang Xiang, Xinglin Yao, Yanbin Li, Siwei Ma, Chuanmin Jia

cs.RO ·submitted 2026-09-22 12:04 UTC · v1
benchmark

Abstract

Physical-condition diversity is largely missing from current benchmarks for robot manipulation. While large-scale simulation benchmarks increasingly incorporate variations in object appearance, scene layout, and visual observations, they typically keep the underlying physical parameters fixed. As a result, important sources of real-world variability, such as changes in mass, friction, and joint dynamics, remain largely untested. We introduce RoboTwin-Phys, a physics-diverse benchmark that treats physical-condition diversity as an explicit dimension of robot manipulation evaluation. The benchmark continuously varies 13 physical attributes within physically plausible ranges, providing a unified setting for evaluating policies across diverse physical operating conditions. We further release more than 5,000 expert demonstrations with ground-truth physical parameters, enabling physical-attribute estimation, condition-aware modeling, and physics-conditioned policy training. Evaluations of representative WAMs and VLAs reveal a substantial robustness gap: models that remain effective under existing visual and layout randomization can degrade markedly under changes in physical conditions. RoboTwin-Phys provides the benchmark, data, and evaluation protocol needed to systematically measure and improve robustness to physical-condition diversity in robot manipulation.

Comment
technical report for a benchmark

Closest papers

Nearest neighbours by meaning across the whole index.

Shades of Success: Evaluating Manipulation Quality from Object-Centric Constraints

cs.RO ·2026-10-31 ·Lorena Maria Genua, Sarvesh Prajapati, Ananya Trivedi, Taskin Padir
similarity 0.77
Abstract

As learned manipulation policies become increasingly capable of solving practical manipulation tasks, assessing how well a task is performed becomes a fundamental challenge. While binary labels confirm task success, they cannot distinguish successful executions with different levels of geometric precision. To address this, we introduce SPECTRA, an object-centric framework for quantifying execution quality in manipulation of rigid objects. From a small set of oracle demonstrations generated in simulation, SPECTRA represents object interactions through progress-aligned relative poses. SPECTRA identifies which relative-pose directions are constrained and their admissible variations from demonstrations. These constraints establish a reference for evaluating robotic manipulation tasks. To score an unseen execution, deviations beyond the admissible variation are summarized by a Task Quality Index Q in [0,1]. Across seven simulated tasks, SPECTRA recovers constraints with 94% accuracy using 30 demonstrations per task. On rollouts from three learned policies, its scores achieve pooled Spearman correlations with human judgments of p=0.81 over all rollouts and p=0.61 among successful rollouts, exceeding all baselines in both subsets. Using the task reference learned in simulation, we use SPECTRA to select the highest-scoring demonstrations for training a diffusion policy on hardware. Exploratory results show higher success rate than training on randomly selected demonstrations.

0.18

PhyVisGen: Physically and Visually High-Fidelity Robotic Manipulation Data Generation

cs.RO ·2026-09-22 ·Yu Zheng, Qiyu Feng, Yixin Wu, Baoquan Yang, Yixuan Zhou +4 more
similarity 0.75
Abstract · 8 pages, 5 figures. Under review

Large-scale manipulation demonstrations are essential for learning robust visuomotor policies, yet real-world data collection is expensive and difficult to scale. Simulation offers a promising alternative, but physical and visual discrepancies can limit the transferability of synthetic data, particularly for manipulation with soft grippers. We present PhyVisGen, a physically and visually high-fidelity framework for scalable robotic manipulation data generation. On the physical side, PhyVisGen introduces an arm-gripper coupling method based on the Incremental Potential Contact (IPC), enabling high-fidelity soft contact throughout complete manipulation trajectories. On the visual side, it combines real-scene reconstruction with real-time path tracing to generate visually realistic observations while preserving captured scene appearance. Quantitative evaluations demonstrate the physical and visual fidelity of PhyVisGen. Policies trained exclusively on synthetic manipulation demonstrations achieve 65-95% success across five real-robot tasks, without real-robot demonstration data or policy fine-tuning.

0.25

X2Real: an eXtensive simulation benchmark for real-world generalist policies

cs.RO ·2026-09-23 ·Lian Ruan, Jade Yang, Sherphylan Gao, Felix Gao, Kyson Liang +21 more
benchmark similarity 0.75
Abstract

Generalist robot manipulation policies have developed rapidly, yet their reliable evaluation remains challenging due to fundamental flaws in existing simulation benchmarks: prominent sim-to-real gaps, narrow task coverage, and unfair evaluation caused by ambiguous training-test pipelines. Prior works only partially resolve these issues and lack simultaneous faithfulness, diversity, and fairness, while static benchmark designs fail to sustain long-term policy development. We present X2Real, an evolvable simulation benchmark for faithfully evaluating the real-world performance of robotic manipulation policies based on Nvidia Isaac Lab-Arena. Following three core principles (faithfulness, diversity, and fairness), X2Real calibrates simulation visual and physical properties to align with real hardware, achieving a 0.84 linear correlation between simulated and real-robot evaluation results. It features a comprehensive taxonomy with 10 capability dimensions and 44 hierarchical long-horizon tasks, covering basic manipulation skills and advanced capacities such as visual grounding, language understanding, and bimanual control. We further adopt multi-axis domain randomization and strictly disjoint training-evaluation pipelines to mitigate benchmark exploitation and ensure credible evaluation. Powered by a custom physical domain-specific language, the Mana simulation ecosystem supports modular task design and iterative performance analysis, alongside a nearly 300-hour annotated simulation trajectory dataset. X2Real offers a faithful, diverse, and fair evolving evaluation infrastructure, effectively bridging the sim-to-real evaluation gap and supporting the advancement of generalist robotic manipulation policies.

0.44

PhyDEX: A Benchmark for Physical Reasoning in Vision-Language-Action Models via Dynamic Extrinsic Dexterity

cs.RO ·2026-11-19 ·Hao Vo, Taisei Hanyu, Yuki Ikebe, Pham Tri Quang, Sreevenkata Anjani Tishita Godavarthi +6 more
benchmark similarity 0.75
Abstract

Vision-Language-Action (VLA) models have advanced rapidly in language-conditioned robotic manipulation, yet existing benchmarks mainly evaluate gripper--object contact and largely ignore how objects interact with the environment through gravity, friction, inertia, and mass distribution. As a result, it remains unclear whether current policies truly understand physics or merely interpolate from their training data. We address this gap through the lens of dynamic extrinsic dexterity and introduce PhyDEX, a throwing benchmark in which a robot must infer an object's mass, center of mass, and friction to send it to a destination beyond its kinematic workspace. PhyDEX contains 35K trajectories (143 hours) across nine tasks and 100 scenes, covering uniform, irregular, and dynamic-mass objects with static, multiple, and moving destinations. All data are generated by a scalable, fully automatic pipeline that combines grasp generation, motion planning, and closed-loop throw optimization under randomized physical properties. We evaluate three representative VLAs, GR00T N1.7, DynamicVLA, and ForceVLA, and find that all achieve success rates below 3\%. Our analysis reveals two key bottlenecks: limited robustness of pretrained models, which causes most failures before the throw, and physical blindness, as providing ground-truth physical properties roughly doubles success. Experiments on a humanoid robot and in the real world show the same failure patterns. We hope PhyDEX will drive the development of physically grounded robot policies.

0.25

MoRE: Mixture-of-Experts for Multi-Physics Robotic World Models

cs.RO ·2026-11-19 ·Ziyu Zhu, Shaowei Liu, Albert J. Zhai, Henry Che, Wei-Chiu Ma +1 more
publishedcode/data similarity 0.74
Abstract · Accepted to CoRL 2026. 19 pages, 8 figures

A robotic world model should predict how objects evolve under robot actions and physical dynamics. While recent 3D world models have shown strong predictive capabilities, they still struggle with the heterogeneous dynamics arising from diverse object interactions. To address this in a unified framework, we decompose robotic interactions into distinct physical regimes and assign each to a specialized motion expert. We introduce MoRE, a 3D world model with a mixture of motion experts organized around rigid, deformable, and prehensile dynamics. This design enables a single model to capture diverse physical behaviors while preserving regime-specific priors. Trained on mixed simulation and real-world data, MoRE integrates with Model Predictive Control (MPC) to support diverse manipulation tasks. Experiments show that MoRE improves prediction accuracy across physics regimes, leading to stronger real-world MPC performance. Code, data, and project website are available at https://alwaysleepy.github.io/MoRE-WM-site/.

0.46

DefFlow: Goal-Conditioned Deformable Object Manipulation using 3D Point Flows

cs.RO ·2026-10-16 ·Gaurav Singh, Sergio Orozco, Ryan Duong, Mete Tuluhan Akbulut, George Konidaris +1 more
similarity 0.74
Abstract

Manipulating deformable objects toward desired 3D configurations is a fundamental capability for robots operating in unstructured physical environments. However, as the range of possible initial and target configurations grows, goal-conditioned deformable manipulation requires a robot to infer increasingly diverse manipulation behaviors in addition to precise continuous actions. We introduce DefFlow, a framework for goal-conditioned manipulation of deformable objects toward a broad range of 3D configurations. DefFlow learns from demonstrations by jointly predicting the goal-conditioned 3D point flow of the robot and deformable object. We show that this formulation better captures both the manipulation decisions, such as when and where to grasp, release, or re-grasp, and the precise continuous motions required for goal reaching, rather than predicting only the robot flow. Across rope, granular-media, and cloth manipulation settings with diverse initial and target configurations, DefFlow substantially outperforms goal-conditioned action-prediction and robot-flow-only baselines on success rates and goal-distance metrics. We further demonstrate deployment of our framework on a real robot using real point-cloud observations and unseen goal configurations.

0.15

DexArena: A Unified Benchmark for Long-Horizon Dexterous Manipulation

cs.RO ·2026-11-02 ·Haonan Ping, Jianshu Hu, Yimin Wang, Yi Zhu, Pai Liang +10 more
benchmarkcode/data similarity 0.74
Abstract · Project page: https://sipair-elastic.github.io/DexArena-website/

Long-horizon dexterous manipulation remains a fundamental challenge for robot learning, requiring the composition of multiple skills, precise bimanual coordination, generalizable visual understanding, and robust skill transitions. Yet existing manipulation benchmarks largely emphasize isolated skills or support only a limited range of end-effectors, making these capabilities difficult to evaluate systematically. We introduce DexArena, a benchmark designed to evaluate learning and generalization in long-horizon bimanual dexterous manipulation. DexArena features 10 long-horizon tasks and 30 stage-level tasks spanning diverse household and industrial scenarios. Each long-horizon task is composed of explicitly defined stages with physically grounded success conditions, enabling reliable evaluation of both intermediate progress and end-to-end task completion. A unified benchmark interface and verified human-teleoperated demonstrations enable testing different policy learning algorithms, with standardized simulation configurations, scene randomization, trajectory replay, and task-level evaluation. Through extensive baseline experiments, we identify substantial challenges in precise manipulation, generalization to scene variation, and skill composition. DexArena establishes a challenging and reproducible benchmark for developing robot learning methods that move toward generalizable long-horizon dexterous behavior.

0.23

BiDex-100: A Comprehensive Benchmark for Bimanual Dexterous Manipulation Across 100+ Simulation Tasks

cs.RO cs.CVcs.LG ·2026-10-18 ·Yong Wang, Kecheng Zheng, Xing Zhu, Chao Xu, Yujun Shen +1 more
benchmark similarity 0.73
Abstract

Bimanual manipulation with dexterous hands has attracted growing attention in research on robotic action models. However, few studies have developed benchmarks specifically tailored for dexterous manipulation, leaving the dexterous manipulation capabilities of existing models insufficiently characterized. In this paper, we present BiDex-100, a simulation benchmark for bimanual dexterous manipulation that combines broad task coverage, multi-dimensional evaluation, and high-DoF hand embodiments. Concretely, the benchmark comprises 106 tasks organized along five capability axes: generalization, instruction following, limited demonstrations, long horizon, and memory. Each task is paired with an out-of-domain variant featuring controlled visual and spatial changes, allowing systematic assessment of robustness. In addition, the benchmark supports two embodiments and provides 8,080 success-validated teleoperated demonstrations, totaling 6.25 million frames. We evaluate seven recent Vision-Language-Action models under a unified protocol, establishing baselines for capability-specific performance, robustness, and data efficiency. The website is available at https://robbyant-research.github.io/BiDex-100/.

0.52